Stock TPI pushrods at 116k
#1
Senior Member
Thread Starter
Join Date: Apr 2003
Location: CHICAGO
Posts: 580
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 FORMULA 350
Engine: 5.7 L98
Transmission: 700R4
Axle/Gears: 9 BOLT/ 3.27 GEARS
Stock TPI pushrods at 116k
Hey Guys, I am about to order a set of 1.6 roller rockers for my stock block TPI motor with 116k miles. Do You guys think it would be wise to change out the old pushrods while I'm at it? I mean... the car doesn't really see high rpm's (tpi of course), but I think it would be a good preventive measure. I wanna order my Summitt rockers now, but I also wanna get the pushrods at the same time. Does anybody know what size and kind I need to order? Thanks, Rik
#2
Moderator
Join Date: Feb 2000
Location: Schererville , IN
Posts: 7,015
Likes: 0
Received 1 Like
on
1 Post
Car: 91 GTA, 91 Formula, 89 TTA
Engine: all 225+ RWHP
Transmission: all OD
Axle/Gears: Always the good ones
If you've never had valve train issues I really wouldnt worry about it honestly.
there are better ones out there for sure, lighter and stronger.
But if your sticking with TPI, it shouldnt be an issue.
If you have concerns, take them out, make sure the oil feeds are clean and lay them all on a piece of glass and roll them to see if they are flat.
later
Jeremy
there are better ones out there for sure, lighter and stronger.
But if your sticking with TPI, it shouldnt be an issue.
If you have concerns, take them out, make sure the oil feeds are clean and lay them all on a piece of glass and roll them to see if they are flat.
later
Jeremy
Thread
Thread Starter
Forum
Replies
Last Post
Sanjay
Engine/Drivetrain/Suspension Parts for Sale
1
08-12-2015 03:41 PM