new best 1/4 et think i should be faster?
#1
Member
Thread Starter
Join Date: Sep 2000
Location: indiana
Posts: 256
Likes: 0
Received 0 Likes
on
0 Posts
new best 1/4 et think i should be faster?
i ran my new best et 13.535 at 104.85
reaction-.887
60ft-1.878
330ft-5.574
1/8-8.666
1000ft-11.318
1/4-13.535
1/4mph-104.85
i ran 13.5 all day with one 13.3 et
last time i ran best at 14.0 with 327 gears what i changed to go from 14.0 to 13.5 was 373 gears and an exhuast cut out hope to go even lower i think with my mph i still got some et to drop what u think? mods in my sig
------------------
1992 camaro RS
373 10 bolt rearend
ssm sfc's
87 350 TPI
bored 30 over
compucam 2032 with 1.6
482-495 LIFT 214-220 duration full roller rockers
msd6AL
1 5/8 headman headers
2 `1/2 flowmaster exuast
k&n filters gutter air box gutted maf
3 pc under drive pulleys
no emissions no egr etc
custom ED Wright chip
eddelbroc intake base and runners ported plenum
midly ported and polished stock heads
Taylor 8mm wires
B&M mega shifter
gutted maf/airbox
hotchkis lower control arms
3" exhuast cutout
homemade cold air intake
2000 tci stall
700R4 with B&M shift kit
new best ET 13.5 @104.66
reaction-.887
60ft-1.878
330ft-5.574
1/8-8.666
1000ft-11.318
1/4-13.535
1/4mph-104.85
i ran 13.5 all day with one 13.3 et
last time i ran best at 14.0 with 327 gears what i changed to go from 14.0 to 13.5 was 373 gears and an exhuast cut out hope to go even lower i think with my mph i still got some et to drop what u think? mods in my sig
------------------
1992 camaro RS
373 10 bolt rearend
ssm sfc's
87 350 TPI
bored 30 over
compucam 2032 with 1.6
482-495 LIFT 214-220 duration full roller rockers
msd6AL
1 5/8 headman headers
2 `1/2 flowmaster exuast
k&n filters gutter air box gutted maf
3 pc under drive pulleys
no emissions no egr etc
custom ED Wright chip
eddelbroc intake base and runners ported plenum
midly ported and polished stock heads
Taylor 8mm wires
B&M mega shifter
gutted maf/airbox
hotchkis lower control arms
3" exhuast cutout
homemade cold air intake
2000 tci stall
700R4 with B&M shift kit
new best ET 13.5 @104.66
#2
I think you should be a little quicker. I think your exhaust is costing you a tenth or two. Reason being because you should really have 1 3/4 headers and a 3 in. exhaust. Just my pov.
------------------
TPI 305,
Gutted airboxes,
gutted MAF,
K&N filters,
Corvette Servo.
14.9@93mph
"Speed kills, wanna live forever, drive a Ford."
------------------
TPI 305,
Gutted airboxes,
gutted MAF,
K&N filters,
Corvette Servo.
14.9@93mph
"Speed kills, wanna live forever, drive a Ford."
#3
Actually those are pretty nice times.....The mph is quite high too. If you have the money to spend, you might want to go with 1 3/4 headers, a full 3 inch catback, and an offroad pipe or high flow cat....There is probably a little to be gained in the area of exhaust.
Nice times!
Jeff
Nice times!
Jeff
Thread
Thread Starter
Forum
Replies
Last Post
RedLeader289
Tech / General Engine
10
05-28-2019 01:47 PM