TPI Tuned Port Injection discussion and questions. LB9 and L98 tech, porting, tuning, and bolt-on aftermarket products.
Sponsored by:
Sponsored by:

smell, grey smoke at startup

Thread Tools
 
Search this Thread
 
Old 07-30-2007, 09:25 PM
  #1  
Junior Member

Thread Starter
 
Formulabruce's Avatar
 
Join Date: Apr 2006
Posts: 93
Likes: 0
Received 0 Likes on 0 Posts
smell, grey smoke at startup

I have a 91Z TPI 5.7 . once its been running a while,( never hot) shut it down and it smells a bit like gas, or vapor but I cant see a leak. Go to start it, within 20 min and it smokes, mostly looks grey. Is it possible the injectors are leaking into the intake after it shuts down causing this? if it sits over night its fine. thanks, Bruce
Old 07-31-2007, 07:55 AM
  #2  
Supreme Member

iTrader: (5)
 
Viprklr's Avatar
 
Join Date: Feb 2002
Location: N. Illinois
Posts: 3,461
Likes: 0
Received 2 Likes on 2 Posts
Car: 92 GTA/ 00 TA
Engine: 383/350
Transmission: 700R4/T-56
Re: smell, grey smoke at startup

Test the resistance of your injectors. Should all be around 14-17. You could also pull the vacuum line off of your FPR and check for gas in the line.
It's possible your charcoal canister is plugged as well.
Also, you should test your fuel pressure. See how high it goes and how long it holds.
Old 08-01-2007, 09:01 PM
  #3  
Junior Member

Thread Starter
 
Formulabruce's Avatar
 
Join Date: Apr 2006
Posts: 93
Likes: 0
Received 0 Likes on 0 Posts
Re: smell, grey smoke at startup

thanks! Ill get on it this weekend!!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
FormulasOnly
TPI
95
07-23-2018 08:47 AM
gixxer92
Engine/Drivetrain/Suspension Parts for Sale
9
05-18-2017 11:20 AM
Badass355ciz28
Power Adders
4
09-28-2015 08:31 PM
dbrochard
Interior Parts Wanted
0
09-28-2015 07:40 PM
tcarlos13
Interior Parts Wanted
0
09-28-2015 06:31 PM



Quick Reply: smell, grey smoke at startup



All times are GMT -5. The time now is 02:37 PM.