TPI Tuned Port Injection discussion and questions. LB9 and L98 tech, porting, tuning, and bolt-on aftermarket products.
Sponsored by:
Sponsored by:

warm engine won't restart

Thread Tools
 
Search this Thread
 
Old 02-28-2011, 02:14 AM
  #1  
Junior Member
Thread Starter
 
troyskibert's Avatar
 
Join Date: Sep 2010
Posts: 35
Likes: 0
Received 0 Likes on 0 Posts
warm engine won't restart

1987 5.7L TPI engine I stuck in an '87 Landcrusier : Starts right up.....runs well, warms up, turn it off, try to restart and it just turns over and over.... checked spark, good... injector noide light blinks, fuel pressure is 35-37.. but...NO START. I can wait 10 min and it fires right up and runs well again... could this be my gas cap? Does the TPI need a different fuel cap then the one I have on this once carburatored truck> Would this be a vapor barrier or? Please school me somebody...I will check this tread in the morning(Monday) around 9A here in CA (PST).
Old 02-28-2011, 03:51 PM
  #2  
Junior Member
Thread Starter
 
troyskibert's Avatar
 
Join Date: Sep 2010
Posts: 35
Likes: 0
Received 0 Likes on 0 Posts
Re: warm engine won't restart

Warmed it up this morning, turned it off after 10 min....turned key and NO START... checked spark, good ... sprayed a little ether in it and used remote starter switch...Fired up. turned off and tried key to start, NO START! Tried remote starter again without ether and she fired up... what gives? When it sits for 5-8 min. after being normal temp, it fires up with key just normally! Then after turning it off it takes another 3 min. to fire again...I timed all this stuff and it is so weird... CAN ANYONE
Help!!

Last edited by troyskibert; 03-01-2011 at 12:41 AM.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Infested
Tech / General Engine
3
05-22-2018 11:56 PM
TheExaminer
Cooling
26
08-26-2015 04:59 PM
zeitghaist
Tech / General Engine
4
08-18-2015 07:33 AM
bradleydeanuhl
DFI and ECM
4
08-12-2015 11:48 AM



Quick Reply: warm engine won't restart



All times are GMT -5. The time now is 12:51 AM.