First time datalogging Questions
#1
First time datalogging Questions
Attempted to data log for the first time and not sure what I'm looking at.
Laptop is running off of battery so I'm not sure if this is good data. You tell me..Please
There was audible pinging during hard acceleration. Much more then when it is not connected to the computer. Runs well, lacks power from dead stop. Exhaust smells bad.
1985 305
1986 wire harness and computer running 1989 prom
dual exhaust no cats, stock manifolds egr deleted
42lbs. fuel pressure at fuel rail (not running)
Laptop is running off of battery so I'm not sure if this is good data. You tell me..Please
There was audible pinging during hard acceleration. Much more then when it is not connected to the computer. Runs well, lacks power from dead stop. Exhaust smells bad.
1985 305
1986 wire harness and computer running 1989 prom
dual exhaust no cats, stock manifolds egr deleted
42lbs. fuel pressure at fuel rail (not running)
#2
Supreme Member
iTrader: (13)
Join Date: Apr 2005
Location: Not in Kansas anymore
Posts: 7,732
Likes: 0
Received 11 Likes
on
11 Posts
Car: 82 Z28
Engine: 383 SP EFI/ 4150 TB
Transmission: T400
Axle/Gears: QP 9" 3.73
Re: First time datalogging Questions
should be posted in tuning dept
https://www.thirdgen.org/forums/diy-prom/
Too hard to read a txt file of log ; would be better to post the log so someone can run it them self to see what is going on
https://www.thirdgen.org/forums/diy-prom/
Too hard to read a txt file of log ; would be better to post the log so someone can run it them self to see what is going on
Last edited by vetteoz; 03-12-2012 at 06:22 PM.
#3
Supreme Member
Join Date: Oct 2002
Location: Idaho
Posts: 1,096
Likes: 0
Received 0 Likes
on
0 Posts
Re: First time datalogging Questions
Looks like a WinALDL log. Do yourself a favor and go over to TunerPro and get TunerPro RT and associated definition files. You'll get way better log and can save it as a TP xdl file anyone with TP can read or export the log to an excel spreadsheet.
The extra pinging sounds like you left the A and B pins shorted keeping it in ALDL mode, have to pull it on most that need it after data starts to flow. Some do not need it at all...
HTH!
The extra pinging sounds like you left the A and B pins shorted keeping it in ALDL mode, have to pull it on most that need it after data starts to flow. Some do not need it at all...
HTH!
#4
Re: First time datalogging Questions
That's exactly what happened... Forgot to pull out the resistor once the data started flowing. I copied and pasted it to excel to read it, but some of the numbers look a little crazy. BLM as high as 247.
This weekend I will dive into Tunerpro.
This weekend I will dive into Tunerpro.
#5
Supreme Member
Join Date: Oct 2002
Location: Idaho
Posts: 1,096
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post