Weiand stealth ram Tpi intake: can you modify your stock fuel rails to work?
09-03-2012, 06:19 PM
#1
Junior Member
Thread Starter
Join Date: Aug 2010
Location: Millersville Pa.
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 IROC-Z Z28
Engine: L98
Transmission: T56
Axle/Gears: 3.70 9 bolt
Weiand stealth ram Tpi intake: can you modify your stock fuel rails to work?
Im trying to figure out if I can use my stock tpi fuel rails with the weiand intake? They want 250$ for the holley rails they rec.!
Thanks guys
Thanks guys
09-03-2012, 06:29 PM
#2
Re: Weiand stealth ram Tpi intake: can you modify your stock fuel rails to work?
Do not believe its possible. Edelbrock victor rails will fit for 90 bucks but you need all the fittings and cross over stuff plus external regulator. Likely approach 200-250 bucks all said and done depending what you get
09-03-2012, 07:03 PM
#3
Junior Member
Thread Starter
Join Date: Aug 2010
Location: Millersville Pa.
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 IROC-Z Z28
Engine: L98
Transmission: T56
Axle/Gears: 3.70 9 bolt
Re: Weiand stealth ram Tpi intake: can you modify your stock fuel rails to work?
I think Im going to just buy the intake and see. Ive seen people modify the stock rails and add fittings. I guess ill find out. Im ordering it tomorrow. Ill post results and pictures( if modification is possible.
09-03-2012, 07:40 PM
#5
Junior Member
Thread Starter
Join Date: Aug 2010
Location: Millersville Pa.
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 IROC-Z Z28
Engine: L98
Transmission: T56
Axle/Gears: 3.70 9 bolt
Re: Weiand stealth ram Tpi intake: can you modify your stock fuel rails to work?
So the injectors line up, i can weld new mounts onto the stock rails?
09-03-2012, 07:53 PM
#6
Junior Member
Thread Starter
Join Date: Aug 2010
Location: Millersville Pa.
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 IROC-Z Z28
Engine: L98
Transmission: T56
Axle/Gears: 3.70 9 bolt
Re: Weiand stealth ram Tpi intake: can you modify your stock fuel rails to work?
Also modify ( install fittings and make lines, including the regulator).
I guess I will know when I get the manifold.
I guess I will know when I get the manifold.
09-03-2012, 08:27 PM
#7
Supreme Member
iTrader: (13)
Join Date: Apr 2005
Location: Not in Kansas anymore
Posts: 7,732
Likes: 0
Received 11 Likes
on
11 Posts
Car: 82 Z28
Engine: 383 SP EFI/ 4150 TB
Transmission: T400
Axle/Gears: QP 9" 3.73
Re: Weiand stealth ram Tpi intake: can you modify your stock fuel rails to work?
If you can make it work the stock TPI reg will be no use.No room for the crossover tube and reg on a HSR
Last edited by vetteoz; 04-11-2014 at 08:06 PM.
Trending Topics
09-04-2012, 07:46 AM
#8
Junior Member
Thread Starter
Join Date: Aug 2010
Location: Millersville Pa.
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 IROC-Z Z28
Engine: L98
Transmission: T56
Axle/Gears: 3.70 9 bolt
Re: Weiand stealth ram Tpi intake: can you modify your stock fuel rails to work?
It looks like there are much cheaper rails you can get. I think Im going to get procomp rails. Looking at regulators now
04-11-2014, 10:39 AM
#9
Member
Join Date: Apr 2012
Location: Walla Walla,WA
Posts: 226
Likes: 0
Received 3 Likes
on
3 Posts
Car: 91 Firebird, 87 E'LS' Camino
Engine: 5.7 TPI, 5.3
Transmission: 700R4,200R4
Axle/Gears: 4.10 Lock Right locker/2.43
Re: Weiand stealth ram Tpi intake: can you modify your stock fuel rails to work?
So follow up please what all did you need to make the stock rail fit? Pr what was the pne you decided to go with?
04-11-2014, 08:08 PM
#10
Thread
Thread Starter
Forum
Replies
Last Post
9192camaro
Engine/Drivetrain/Suspension Parts for Sale
16
02-03-2019 12:21 AM
L98GTA87
Engine/Drivetrain/Suspension Wanted
1
08-11-2015 06:55 PM
