350 build help
#1
Member
Thread Starter
Join Date: Mar 2013
Posts: 121
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Formula
Engine: 305
Transmission: T-5
Axle/Gears: 3.45 1LE Disc LSD
350 build help
Ok so i have my 86 Iroc and im doing a full restoration on.
I have the stock (blown) 305 out and im rebuilding it to sell.
The only part im keeping is the TPI intake.
I'm looking for a 350 block now to throw it on. (96-98 silverado)
BTW I know 22lb injectors are needed for this build.
Is there anything else i should keep from this engine besides the harness?
I'm looking at building my 350 with more than 300hp maybe 350hp
Just trying to estimate out some number figures of what ill need to spend.
The big numbers minus the misc. will be the heads cam crankshaft and possibly pistons.
Can you guys list some products good for my build that you have used and recommend?
Any information would be really helpful
I posted some pictures of the tare down.
Thanks in advanced guys!!
I have the stock (blown) 305 out and im rebuilding it to sell.
The only part im keeping is the TPI intake.
I'm looking for a 350 block now to throw it on. (96-98 silverado)
BTW I know 22lb injectors are needed for this build.
Is there anything else i should keep from this engine besides the harness?
I'm looking at building my 350 with more than 300hp maybe 350hp
Just trying to estimate out some number figures of what ill need to spend.
The big numbers minus the misc. will be the heads cam crankshaft and possibly pistons.
Can you guys list some products good for my build that you have used and recommend?
Any information would be really helpful
I posted some pictures of the tare down.
Thanks in advanced guys!!
Thread
Thread Starter
Forum
Replies
Last Post
Eric-86sc
Engine/Drivetrain/Suspension Parts for Sale
0
08-24-2015 09:01 PM