280 cfm, is it possible out of tpi runners?
#1
Junior Member
Thread Starter
Join Date: Mar 2012
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 pontiac firebird trans am GTA
Engine: TPI 350
Transmission: auto 700r4
Axle/Gears: borg warner 9 bolt and 3.27
280 cfm, is it possible out of tpi runners?
im trying to see if I can find some runners that can flow 280 cfm, stock or ported, the heads I want to use would be 195cc afr heads, does anybody know what as&m runners fully ported flow?
#3
Junior Member
Thread Starter
Join Date: Mar 2012
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 pontiac firebird trans am GTA
Engine: TPI 350
Transmission: auto 700r4
Axle/Gears: borg warner 9 bolt and 3.27
Re: 280 cfm, is it possible out of tpi runners?
it don't show asm runners but thanks
#4
Sponsor
iTrader: (92)
Re: 280 cfm, is it possible out of tpi runners?
Large Tube runners for the 1989 to 1992 Camaro, Firebird and Corvette. Have proven to increase torque by 30 ft/lb. and horsepower by 25 on stock 5.7L engine Flows 260 CFM per runner, Clear hard anodized finish, Includes gaskets and 4 bolts. Matches factory appearance, Polished runners are optional, please select polished when ordering.
taken form the as&m website....
#5
Junior Member
Thread Starter
Join Date: Mar 2012
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 pontiac firebird trans am GTA
Engine: TPI 350
Transmission: auto 700r4
Axle/Gears: borg warner 9 bolt and 3.27
Re: 280 cfm, is it possible out of tpi runners?
[quote=Tuned Performance;5615412]Large Tube runners for the 1989 to 1992 Camaro, Firebird and Corvette. Have proven to increase torque by 30 ft/lb. and horsepower by 25 on stock 5.7L engine Flows 260 CFM per runner, Clear hard anodized finish, Includes gaskets and 4 bolts. Matches factory appearance, Polished runners are optional, please select polished when ordering.
taken form the as&m website....[/
ok is it possible to port them to 280 cfm?
taken form the as&m website....[/
ok is it possible to port them to 280 cfm?
#7
Supreme Member
iTrader: (13)
Join Date: Apr 2005
Location: Not in Kansas anymore
Posts: 7,732
Likes: 0
Received 11 Likes
on
11 Posts
Car: 82 Z28
Engine: 383 SP EFI/ 4150 TB
Transmission: T400
Axle/Gears: QP 9" 3.73
Re: 280 cfm, is it possible out of tpi runners?
https://www.thirdgen.org/forums/post...714-post9.html
What do you plan to use for a TPI manifold that will support that head flow?
Some reading
https://www.thirdgen.org/forums/tpi/...-manifold.html
What do you plan to use for a TPI manifold that will support that head flow?
Some reading
https://www.thirdgen.org/forums/tpi/...-manifold.html
Trending Topics
#8
Junior Member
Thread Starter
Join Date: Mar 2012
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 pontiac firebird trans am GTA
Engine: TPI 350
Transmission: auto 700r4
Axle/Gears: borg warner 9 bolt and 3.27
Re: 280 cfm, is it possible out of tpi runners?
https://www.thirdgen.org/forums/post...714-post9.html
What do you plan to use for a TPI manifold that will support that head flow?
Some reading
https://www.thirdgen.org/forums/tpi/...-manifold.html
What do you plan to use for a TPI manifold that will support that head flow?
Some reading
https://www.thirdgen.org/forums/tpi/...-manifold.html
#9
Supreme Member
Re: 280 cfm, is it possible out of tpi runners?
I would save myself the agravation and go to a miniram or stealthram
#10
Junior Member
Thread Starter
Join Date: Mar 2012
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 pontiac firebird trans am GTA
Engine: TPI 350
Transmission: auto 700r4
Axle/Gears: borg warner 9 bolt and 3.27
#11
Supreme Member
iTrader: (13)
Join Date: Apr 2005
Location: Not in Kansas anymore
Posts: 7,732
Likes: 0
Received 11 Likes
on
11 Posts
Car: 82 Z28
Engine: 383 SP EFI/ 4150 TB
Transmission: T400
Axle/Gears: QP 9" 3.73
Re: 280 cfm, is it possible out of tpi runners?
Kinda like running up a hill with your hand over your mouth if you are looking to get the best out of the AFR's
Try
http://www.firstfuelinjection.com/products.htm
http://forums.corvetteforum.com/1562829858-post8.html.
for FIRST intake on here ; plenty of info
Try
http://www.firstfuelinjection.com/products.htm
http://forums.corvetteforum.com/1562829858-post8.html.
for FIRST intake on here ; plenty of info
#12
Junior Member
Thread Starter
Join Date: Mar 2012
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 pontiac firebird trans am GTA
Engine: TPI 350
Transmission: auto 700r4
Axle/Gears: borg warner 9 bolt and 3.27
Re: 280 cfm, is it possible out of tpi runners?
thanks man, so they sell basically the whole top end for the tpi, and everything is matched together, do they have the egr port? and I read ur corvette forum that's amazing
Thread
Thread Starter
Forum
Replies
Last Post
86IROC112
Engine/Drivetrain/Suspension Parts for Sale
4
08-17-2015 02:00 PM
Sanjay
Engine/Drivetrain/Suspension Parts for Sale
1
08-12-2015 03:41 PM