Which wire is signal coming out of the T56 VSS??
07-09-2002, 04:29 PM
#1
Member
Thread Starter
Which wire is signal coming out of the T56 VSS??
Here's my problem. The T56 I bought had no wiring harnesses with it so I had to buy the GM pig tails for the sensors. The harness that plugs into the VSS has two identical white wires, so I don't know which one is the signal wire. Is the one near the front or back of the car the signal wire. Any help would be great.
07-10-2002, 11:44 AM
#2
Supreme Member
Join Date: Jan 2001
Location: Rock Hill, SC
Posts: 1,411
Likes: 0
Received 3 Likes
on
3 Posts
Car: 1999 Pontiac T/A Firehawk
Engine: ***'s Engine
Transmission: T56
Both. Or neither. Take your pick.
The real answer is it doesn't matter. Connect one line to ground, then the other end is signal. I doubt I could even tell you which side I made ground without tracing the wires back.
The real answer is it doesn't matter. Connect one line to ground, then the other end is signal. I doubt I could even tell you which side I made ground without tracing the wires back.
07-10-2002, 02:27 PM
#3
Member
Thread Starter
Thanks, I just talked to Dakota Digital and they said it's an AC output. So it doesn't matter what is ground or signal.
Later
Later
Thread
Thread Starter
Forum
Replies
Last Post
