Transmission Crossmember Questions
#1
Junior Member
Thread Starter
Join Date: Jun 2005
Location: Upstate NY
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1982 z28, 2007 Silverado
Engine: 350 Chevy, 10-1 CR, Comp Cams 270h
Transmission: Th350,
Axle/Gears: 3.23
Transmission Crossmember Questions
Hi Guys, I'm putting a TH-350 in my 82 z28 and the transmission crossmember has another mount that goes on top of it, about 10" long, then the transmission mount bolts to this mount that I'm talking about.... Well, the rubber vibration isolators on this longer mount are shot, the rubber is completely falling apart...
Where can I get new ones, what are they called... I tried to get a set from Advance auto parts, and the guy didn't have a clue as to what i was talking about....
Thanks!
Where can I get new ones, what are they called... I tried to get a set from Advance auto parts, and the guy didn't have a clue as to what i was talking about....
Thanks!
#2
Moderator
iTrader: (5)
Transmission cross member bushings. Check this link:
https://www.thirdgen.org/techbb2/sho...hreadid=327912
I bought the Energy Suspension poly from Summit. ENS-3-1109G (black) or ENS-3-1109R (red).
JamesC
https://www.thirdgen.org/techbb2/sho...hreadid=327912
I bought the Energy Suspension poly from Summit. ENS-3-1109G (black) or ENS-3-1109R (red).
JamesC
Last edited by JamesC; 11-30-2005 at 12:59 PM.
#3
Junior Member
Thread Starter
Join Date: Jun 2005
Location: Upstate NY
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1982 z28, 2007 Silverado
Engine: 350 Chevy, 10-1 CR, Comp Cams 270h
Transmission: Th350,
Axle/Gears: 3.23
Wow, that was fast... Thank You!
This place is great
CK76239
This place is great
CK76239
Thread
Thread Starter
Forum
Replies
Last Post