Transmissions and DrivetrainNeed help with your trans? Problems with your axle?
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
Ok to start off my car was originally a 2.8l / 5 Spd car. I am now in the process of swapping in a 400 SBC and TH400. Before I had the 120 MPH V6 Cluster, but I have switched to the 140 MPH GTA V8 cluster.
My question is what all do I need to buy to get the speedo to read correctly for my TH400 Tranny?
[quote=Stippy17;4120369]I have switched to the 140 MPH GTA V8 cluster.
QUOTE]
Cluster is out of what year vehicle? BTW, check the tech section on this site. There's a great How To article that addresses Trans Am electronic cluster swap. Even has wiring id to boot. Very helpful if that's what your working with?
Not sure what year GTA the cluster is out of, but I already have it in my car. Ill check the Tech Section, but Im looking more for how I get my TH400 (Which is I believe set up for a cable speedo) to work with an Electric Speedo like our cars have. I know I need an adapter, but I was hoping someone had a part number of one that would work, and if there is anything else besides the adapter Ill need.
