Transmissions and DrivetrainNeed help with your trans? Problems with your axle?
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
Where is the clutch bleeder screw on a 99 t-56? I have a leak which appears to be at either the slave cylinder or the line from the master cylinder where it goes into the slave.. I put a little fluid in it and the pedal came back up and works again but it falls back to the floor again after a few minutes of not being used but you can pump it back up again.. anyway where is the bleeder screw on the slave cylinder? I thought it was in front of where the line goes into it on the side of the tranny but there's no sign of it there..
