700r4 street & strip --- help
#1
Junior Member
Thread Starter
Join Date: May 2010
Location: BAHRAIN
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Car: IROC-Z
Engine: 377
Transmission: 700R4
Axle/Gears: 3.73
700r4 street & strip --- help
hi guyz
im going to change Clutches in my iroc-z
so
any body know about good brand and cheap
im talking about 500hp
thanx
im going to change Clutches in my iroc-z
so
any body know about good brand and cheap
im talking about 500hp
thanx
#2
Supreme Member
Join Date: Jul 1999
Location: Calimesa, California, U.S.
Posts: 3,458
Likes: 0
Received 39 Likes
on
27 Posts
Re: 700r4 street & strip --- help
Go to https://www.700r4l60e.com/store/prod...&cat=19&page=1 This will give you all you need to build it for 500FWHP. Dana
#3
Supreme Member
iTrader: (1)
Join Date: Sep 2005
Posts: 26,117
Received 1,688 Likes
on
1,283 Posts
Car: Yes
Engine: Usually
Transmission: Sometimes
Axle/Gears: Behind me somewhere
Re: 700r4 street & strip --- help
The ones you linked to in your other post, the Alto "Red Eagle", are a good one.
You'd need the entire kit though.
Plus, for that transmission to survive behind high power, there are other parts that need some attention, besides just the "kit". "The Beast" sun shell, a Transgo shift kit, Corvette or similar servo, are a few common upgrades that make a BIG difference to both performance and longevity.
And of course, having somebody build it that is familiar with it in detail and knows EXCATLY what to do, is a HUGE help as well.
Being where you are, you might want to consider buying a whole, ready-to-install transmission, rather than trying to piece it together. Dana at ProBuilt, PATC, and a few others, are good places to start looking for that.
You'd need the entire kit though.
Plus, for that transmission to survive behind high power, there are other parts that need some attention, besides just the "kit". "The Beast" sun shell, a Transgo shift kit, Corvette or similar servo, are a few common upgrades that make a BIG difference to both performance and longevity.
And of course, having somebody build it that is familiar with it in detail and knows EXCATLY what to do, is a HUGE help as well.
Being where you are, you might want to consider buying a whole, ready-to-install transmission, rather than trying to piece it together. Dana at ProBuilt, PATC, and a few others, are good places to start looking for that.
#4
Junior Member
Join Date: May 2007
Location: Coatesville, PA
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Iroc Z
Engine: SBC 355 crate motor
Transmission: T56 6-speed
Axle/Gears: 7.5 stock Disc rear.
Re: 700r4 street & strip --- help
If you are interested i have a built 700r4 for $1000. about 1000mi since rebuild, transgo shift kit, corvette servo, eagle clutches, heavy duty sprags, HD 2000-2600 stall converter, full throttle valve added. I intended on using it for a 500hp crate motor and the shop that built it told me it should have no problem handling it.
#5
Supreme Member
Join Date: Jun 2006
Location: West-Central
Posts: 2,199
Likes: 0
Received 1 Like
on
1 Post
Car: 91 Trans am
Engine: built 360 TBI
Transmission: built 700r4
Axle/Gears: 10bolt/3.23
Re: 700r4 street & strip --- help
They have a nice parts megastore and shipp out quickly, but I would not buy another assembled transmission from them.
https://www.thirdgen.org/forums/tran...level-3-a.html
https://www.thirdgen.org/forums/tran...uck-patcs.html
https://www.thirdgen.org/forums/tran...level-3-a.html
https://www.thirdgen.org/forums/tran...uck-patcs.html
#6
Junior Member
Thread Starter
Join Date: May 2010
Location: BAHRAIN
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Car: IROC-Z
Engine: 377
Transmission: 700R4
Axle/Gears: 3.73
Re: 700r4 street & strip --- help
thainx guys
i already have transgo stage 2-3 (i did not fix it yet)
so i think better i go with red eagle
i already have transgo stage 2-3 (i did not fix it yet)
so i think better i go with red eagle
#7
Junior Member
Thread Starter
Join Date: May 2010
Location: BAHRAIN
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Car: IROC-Z
Engine: 377
Transmission: 700R4
Axle/Gears: 3.73
Re: 700r4 street & strip --- help
If you are interested i have a built 700r4 for $1000. about 1000mi since rebuild, transgo shift kit, corvette servo, eagle clutches, heavy duty sprags, HD 2000-2600 stall converter, full throttle valve added. I intended on using it for a 500hp crate motor and the shop that built it told me it should have no problem handling it.
dear im in bahrain I guess the shipping will be 500$
Trending Topics
#8
Junior Member
Join Date: May 2007
Location: Coatesville, PA
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Iroc Z
Engine: SBC 355 crate motor
Transmission: T56 6-speed
Axle/Gears: 7.5 stock Disc rear.
Re: 700r4 street & strip --- help
probably more than that
Last edited by 82IROCZ; 04-24-2011 at 11:25 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Mongoose462ci
North East Region
0
09-16-2015 11:46 PM