I need help..leaky tranny
#1
Senior Member
Thread Starter
I need help..leaky tranny
I just got my camaro back less than a hour ago from a mechanic. Got gas in it. He said I was empty on tranny fluid. Bought some poured the whole 4 quarts in there at a time. Cut the car on it cut straight on no problem. Look under the car under the driver side I see a nice puddle.
I need help !?! Please
I need help !?! Please
#2
Member
Join Date: Sep 2009
Location: Portland, OR
Posts: 211
Likes: 0
Received 1 Like
on
1 Post
Car: 1988 Camaro Iroc-Z
Engine: 305
Transmission: T-5
Axle/Gears: 3.08
Re: I need help..leaky tranny
It can be few things...
the tranny filter housing needs to be retorqued or/and replace the gasket
the collant lines that goes from the tranny to the radiator might be leaking as well.
There might be some other things, but thats the things I had to deal with when I had automatic tranny Camaro.
the tranny filter housing needs to be retorqued or/and replace the gasket
the collant lines that goes from the tranny to the radiator might be leaking as well.
There might be some other things, but thats the things I had to deal with when I had automatic tranny Camaro.
#3
Senior Member
Thread Starter
Re: I need help..leaky tranny
It can be few things...
the tranny filter housing needs to be retorqued or/and replace the gasket
the collant lines that goes from the tranny to the radiator might be leaking as well.
There might be some other things, but thats the things I had to deal with when I had automatic tranny Camaro.
the tranny filter housing needs to be retorqued or/and replace the gasket
the collant lines that goes from the tranny to the radiator might be leaking as well.
There might be some other things, but thats the things I had to deal with when I had automatic tranny Camaro.
Thx for replying so fast. But I hope not, I'm praying I just poured it in too fast. It it spilled or something.
#5
Senior Member
Thread Starter
Re: I need help..leaky tranny
Had someone look at it today said look like the tranny dipstick is broke..gotta replace that
Thread
Thread Starter
Forum
Replies
Last Post
TinnMann2
Canadian Region
16
06-18-2017 05:10 PM