speedo not working and no code
08-25-2011, 04:05 PM
#1
Junior Member
Thread Starter
Join Date: Apr 2011
Location: ohio
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 camaro rs
Engine: 3.1 v6 MFI
Transmission: 5 speed
Axle/Gears: poss rear end
speedo not working and no code
i have a 92 camaro 3.1 v6 mfi 5 speed. my speedo was working. i had to put a fuel pressure regulator on it over the winter. in that time i replaced all dash lights and bypassed the vats with the right resistors. now the speedo don't work and have check engine light and no codes.. need help.. didn't want to replace the vss. as it costs 110.00 for mine. just didn't want to put it on and still not work..any help..
08-25-2011, 04:07 PM
#2
Junior Member
Thread Starter
Join Date: Apr 2011
Location: ohio
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 camaro rs
Engine: 3.1 v6 MFI
Transmission: 5 speed
Axle/Gears: poss rear end
Re: speedo not working and no code
i have read alot of threads on here and still stumped.. is there a way to put a test light on the vss plug? or a way to see if its the wire or ground? all gauges work fine..
09-09-2011, 10:23 AM
#3
Junior Member
Thread Starter
Join Date: Apr 2011
Location: ohio
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 camaro rs
Engine: 3.1 v6 MFI
Transmission: 5 speed
Axle/Gears: poss rear end
Re: speedo not working and no code
you know never mind on a response.. i will figure it out. thanks for nothing
09-09-2011, 10:41 PM
#4
Supreme Member
iTrader: (1)
Join Date: Nov 2003
Location: Davenport, Iowa
Posts: 1,598
Likes: 0
Received 2 Likes
on
2 Posts
Car: Still a 3rd Gen
Engine: 450HP 355
Transmission: TH350
Axle/Gears: 9" with 4.11's
Re: speedo not working and no code
to test the VSS output you need an oscilloscope or a voltmeter.
my guess is that your cluster isn't seated into the plugs all the way, pull it back out and re-check all your work, then clean the contacts.
my guess is that your cluster isn't seated into the plugs all the way, pull it back out and re-check all your work, then clean the contacts.
09-22-2011, 01:02 AM
#5
Junior Member
Thread Starter
Join Date: Apr 2011
Location: ohio
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 camaro rs
Engine: 3.1 v6 MFI
Transmission: 5 speed
Axle/Gears: poss rear end
Re: speedo not working and no code
i just bought another cluster it works fine. must have been just the speedo after all thanks..
Thread
Thread Starter
Forum
Replies
Last Post
beachrodder
Transmissions and Drivetrain
3
08-07-2015 04:27 PM
