//<86TA>\\

iTrader: (14)

you may need it. Somtimes the rear is centered enough after the car is lowered and you dont need it. but having one wont hurt

karl's-92'-z28

iTrader: (5)

Noticed your from Hawaii sent you a PM

karl's-92'-z28

iTrader: (5)

Ahhhh gotcha, i wanna lower my car, just not sure what else i need. I have GC coilovers already.

simz28

iTrader: (10)

Heres mine, 2 inch spacers in the rear, 1.7 up front with the brake upgrade, 285/35/17 rear, 275/35/18 up front

Demon355

iTrader: (1)

Looks good simz28! What tires do you have on there? Where did you get the 1.7 front spacers?

simz28

iTrader: (10)

I got nitto nt555 all the way, found the rear tires at a swap meet for 40 bucks, still got about 50% tread left. as far as the front wheel spacers, they are from skulte, but being the cheap bastard i am, i searched and searched on ebay untill i fould a used set, i think i payed like 50 bucks for them with shipping, lol

Yes_to_83_z28

What color is that?

CRAMOS78

ok, ive gone through this whole thread, as well as the post you vette wheels thread and have not found my answer.

Is anyone running the stock C6 Z06 rims on a third gen.
I believe they are 18x9.5 and 19x12. will they fit.
I want to change out my current c5 setup
[IMG][/IMG]

raith

I would guess that you are going to have to tub out the rear to get those tires to fit. without modifying the rear quarters or the trunk well, 19x12's wont fit.
and for the front, you are going to have to do some work on the fenders as well to be able to turn from full lock to full lock without rubbing the fenders or the inner fender wells

IrocZ'85

iTrader: (9)

I don't wanna ressurrect a dead thread, but it's hard to find more people with these. I'm very seriously considering them as they look awesome, but I really like the C6 basemodel wheels as well. OE wheels has these from the picture and deep dish as well as non-dished versions of the c5 and c6 wheels. here are the links:
http://www.oewheelsllc.com/Wheels_3/...-Wheels-Argent
http://www.oewheelsllc.com/Wheels_3/...heels-gunmetal

I really liked orr89iroc's wheels which are the c6 competition gray 19s in the rear and 18s up front, and oe wheels has them dished as shown. So basically I was wondering if anyone has run either of these 2 wheels and could please post pictures because I'd love to see them on more irocs before I make a purchase! Anyone?! Also, in the above pics that i quoted, does anyone know if those are the 18x10.5 / 17x9.5? thanks!

IrocZ'85

iTrader: (9)

woops just found the thread that answered my questions if anyone is interested: https://www.thirdgen.org/forums/post...5-post304.html

pics are still welcome tho

Inpheksion

So, I have a 1991 Z-28, stock. 4 wheel disc (non 1LE), Perf Suspension Package etc.

If I buy these:

http://cgi.ebay.com/ebaymotors/18-Po...ht_1717wt_1165


And (4) 2" adapters, they should go on my car with no problems?


Also, is around $600 a good deal for those rims?

karl's-92'-z28

iTrader: (5)

Yes with 2" spacers you can run any Corvette or 4th gen Camaro rims.

thetrucker21

that brake system is sick dude how much did you drop for that?

simz28

iTrader: (10)

Got it for 800 bucks used, was in great shape, goes for like 1500 new

squatingeagle

i read racing geek did 18x10.5 all around has anyone else done that? i have 4 chrome chrome zo6 18x10.5 and was wondering what your guys' thoughts are for getting them installed. 58mm offset. stock axle. disc brakes front and rear non 1LE.

New2Chevy

iTrader: (11)

Not sure about 10.5s up front but in the rear is fine. Make sure you check the spacing changes that may occur when using other than stock front brakes. For example the c4 brakes push the measurements out like .3" on each side up front so you need a thinner spacer to prevent rubbing tires on fender wells.

dannyrfair

Are those 18's all the way around? They look bigger I'm the rear

Q's 91z28

I'm running 17s up front and 18s for the rear. Also running a 4th gen rearend.

FiVe KiLLZ

Front:
245/40/18 -18x8.5 - 2.0 spacer
Rear:
285/35/19 - 19x10 - 2.25 spacer
Wrapped in goodyear eagle f1

RJ76FLORES76

so with 17/9.5 rims 2 inch spacers should be fine?

GilbySauce_24

Alright everyone... Don't yell at me for asking, but will these fit?


http://www.ebay.com/itm/321707569455?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

I want to wrap them in Nitto Invo 285/35r19's in the rear and 265/35r18's up front. My 92 isn't lowered and I was planning on running 2" hubcentric spacers all around. I read that possibly a 2.25" is better for upfront? Comments? Concerns? Advice?


Thanks everyone!

Realmac4

iTrader: (2)

Here is mine

91 Z/28 M6
Eibach springs

OE Wheels C6 Z06

18x8.5 front / 1.5 spacer /255/45/18 Sumitomo

18x10.5 rear / 2 in. spacer / 285/35/18 Sumitomo

Slight rub in the rear forward inner part of the rear wheel well, nothing a BFH wont take care of

Mike

UltRoadWarrior9

Z06 Replica rims here. WIP.

18X10.5 in the rear with Continental DWS 295 35ZR 18. 2" spacers. About 1/2" clearance with inner wheel well. Not road tested.
17x9.5 in the front with Continental DWS 275 40ZR 17. 2" spacers. Clearance OK with wheels straight. Not road tested.

Original brakes in the pics. Upgrading rear axle next to 2002 Camaro SS. Will road test after axle replacement...

camaroaddiction

Please point me in the right direction where I can find these rims im in love with them.

alexIROC86

Your car is beautiful 😍 where did you buy your wheels at?

FiVe KiLLZ

I run a 2 inch on the front and 2.25 on the rear. I would say the 2.25 wouldnt be bad if you want to go that wide. The 2 inch gives it a very staggered look pushing a 295 on the rear.

FiVe KiLLZ

I'm two posts above your post with the red very with black z06 wheels. And it's a 285 rear, sorry

Bstinger26

Ok so to further revive a dead thread I’m looking at the C6 Z06 rims 18x9.5 to put on my 87. I have stock suspension and I’m wondering what’s the maximum tire size I could go, what’s the minimum and maximum space size I need and will I have any clearance issues? Any advice is greatly appreciated.