Will these fit my camaro?
#2
Re: Will these fit my camaro?
Pretty sure the fronts wont fit without big ole adapters. Stock is 0 offset. Stock rears are 16mm, but those are probably pretty close to 4th gen, so with a 4th gen rear, it should appear close to thirdgen proportions. Not sure about 4th gen widths.
As for all the little variables with ride height and brakes etc. etc., I wouldn't say for sure they would fit. ...but 0 front and 16 rear are stock, you can do your math from there.
Chris out this link. LOTS of knowledge here.
http://www.skulte.com/adapterfaq.html
As for all the little variables with ride height and brakes etc. etc., I wouldn't say for sure they would fit. ...but 0 front and 16 rear are stock, you can do your math from there.
Chris out this link. LOTS of knowledge here.
http://www.skulte.com/adapterfaq.html
#3
Supporter/Moderator
![](https://www.thirdgen.org/forums/images/ranks/tgo10.gif)
iTrader: (7)
Join Date: Feb 2001
Location: Cincinnati, OH
Posts: 13,272
Likes: 0
Received 396 Likes
on
302 Posts
Car: '90 RS
Engine: 377 LSX
Transmission: Magnum T56
Re: Will these fit my camaro?
The bolt circle is 120mm on those wheels and not 120.65 (3rd gen). If the wheels are hubcentric than they might fit. However, if the dimensional stackup is not in your favor those won't bolt up. Especially with acorn centering lug nuts.
Thread
Thread Starter
Forum
Replies
Last Post