Aftermarket Product Review Provide questions and answers about aftermarket parts for the Third Generation F-Body.

G-TECH TIMES.....:(

Thread Tools
 
Search this Thread
 
Old Nov 13, 2000 | 08:51 PM
  #1  
quickL98's Avatar
Thread Starter
Member
iTrader: (2)
 
Joined: Jul 2000
Posts: 386
Likes: 0
From: helldon, fl
Car: 87 trans am GTA
Engine: tesla permanent magnet
Transmission: 93 T-56
Axle/Gears: moser 12bolt w/ 3.73
G-TECH TIMES.....:(

ok let me fill you in on my ride as of right now...stock 48mm TB, SR 355, 2800 stall, 3.73, AFR 190 yada yada...sportsman pros 26-9.5-16.
with a needs to stay the hell away from the buffet weight of about 3800lbs (car +dr.+pasgr.) i ran:
13.34 @ 99.6
*2200 launch, roasted the tires in first, then let off due to a lack of straight road)
second pass: 13.02 @110.4
*1100 rpm luanch, car bogged then spun through 1st again.

i know without the pass i would've broke in to the 12's easily(sorry baby). i'm sure having a stock TB isnt helping out much either. but i cant seem to find traction even with sticky tires.
future plans : i'm recieveing a 58mm TB as a partial payment for tranny work so thats taken care of, i'm thinking of BMR lower cont. arms and an air bag in the RR spring , plus i have sub frames sitting in the garage along with a 4.10 i pirated from a s-10(currently have 3.73)
i know car with perform but 13 oh's arent bad for right now...right???

Reply
Old Nov 13, 2000 | 09:06 PM
  #2  
quickL98's Avatar
Thread Starter
Member
iTrader: (2)
 
Joined: Jul 2000
Posts: 386
Likes: 0
From: helldon, fl
Car: 87 trans am GTA
Engine: tesla permanent magnet
Transmission: 93 T-56
Axle/Gears: moser 12bolt w/ 3.73
i know that the g-tech are about 2 mph fast so make it 108mph

------------------
87GTA super-ramed 355, A4 ran high 12's with old school setup and radials, hoping for low 12's or better /91 TA daily driver LB9 A4 2.73,
Reply
Old Nov 13, 2000 | 10:43 PM
  #3  
PROCHARGED89Z's Avatar
Member
 
Joined: Nov 1999
Posts: 391
Likes: 0
From: FALL RIVER MA USA
Fuel system mods?Please give us the whole combo,I never have seen yada yada yada as a aftermarket mod jk
Reply
Old Nov 13, 2000 | 11:46 PM
  #4  
Grim Reaper's Avatar
TGO Supporter
 
Joined: Jul 1999
Posts: 10,907
Likes: 5
From: The Bone Yard
Car: Death Mobile
Engine: 666 c.i.
I thought yada yada yada meant cam in Hebrew.
Reply
Old Nov 14, 2000 | 04:47 PM
  #5  
quickL98's Avatar
Thread Starter
Member
iTrader: (2)
 
Joined: Jul 2000
Posts: 386
Likes: 0
From: helldon, fl
Car: 87 trans am GTA
Engine: tesla permanent magnet
Transmission: 93 T-56
Axle/Gears: moser 12bolt w/ 3.73
NO! NO!NO! cam in hebrew is yashka....smart ***
stock 48MM TB, AFR 190,350 .30 OVER, 700R4 W/ 2800 STALL, STOCK WOREOUT SHIFTER, .510-230-112 FLAT TAPPET CAM('74 BLOCK), ACCEL SUPERRAM, 24LB FMS INJ'S, MODDED MAF, 1-5/8 HEADERS, SINGLE 3" WITH A 2.5 IN Y-PIPE, AND 3.73 GEARS. RD WRIGHT CHIP. OH YEAH I ALMOST FORGOT...YADA YADA YADA:P

------------------
87GTA super-ramed 355, A4 ran high 12's with old school setup and radials, hoping for low 12's or better /91 TA daily driver LB9 A4 2.73,
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
BAK12484
Tech / General Engine
12
Nov 27, 2001 02:57 AM
silver89Rs
Electronics
1
Nov 7, 2001 07:47 PM
IrocJT
TBI
4
Jun 8, 2001 10:10 PM
91Bird305
TBI
12
May 12, 2001 07:41 PM
My90Iroc
Aftermarket Product Review
3
May 9, 2001 05:39 AM




All times are GMT -5. The time now is 10:57 PM.