Aftermarket ineterior/exterior parts for 86 TA...
#1
Member
Thread Starter
Aftermarket ineterior/exterior parts for 86 TA...
I'm in the process of fixing up a 1996 Trans Am. I've gotten catalogs for my previous 68 mustang for aftermarket seats, carpet, etc, but was wondering if there's a place that has a large selection of moldings, carpet, seats for my TA.
I'm new, so thanks for any help.
I'm new, so thanks for any help.
#4
Senior Member
#5
Member
Thread Starter
Dickson, TN. I have a 1986 TA with a blown 305 4 bbl. I had no problems with finding after market parts for a mustang, I was just wondering where I can find aftermarket parts for my new baby (86 TA).
#7
Member
Thread Starter
Mainly body. I found a nose at keystone for around $240. But I'm still shy on finding dashpad, carpet, seats, etc. I've got the engine side covered, I just need help with body and interior.
Thanks
Thanks
Trending Topics
#8
Senior Member
Dashpad, depends on if you want a new one or if used is O.K. then try e-bay, or the classifieds here.
Carpet, everyone here seems to like the ACC carpet. I got mine from www.1aautomotive.com About $200.00 for front and rear, or you can get just the front for a little cheaper.
Seats, I like my SPARCOs but It all depends on if you want factory seats or if you like aftermarket.
4th gen seats look good too.
Or you can get new covers for you'r orig. seats from one of the sponcers at the top of the page.
And get a 4th gen center console too.
Anything else??
Carpet, everyone here seems to like the ACC carpet. I got mine from www.1aautomotive.com About $200.00 for front and rear, or you can get just the front for a little cheaper.
Seats, I like my SPARCOs but It all depends on if you want factory seats or if you like aftermarket.
4th gen seats look good too.
Or you can get new covers for you'r orig. seats from one of the sponcers at the top of the page.
And get a 4th gen center console too.
Anything else??
#10
Member
Thread Starter
BTW, you can check out my car at http://kaylin4u.tripod.com/transam.html.
Of course my girls had to be in it too!
Of course my girls had to be in it too!
#11
Member
Thread Starter
Well, there is no period at the end of the hyperlink...Try...
http://kaylin4u.tripod.com/transam.html
I've been waiting a long time for this car.
Years ago, I had a 1983 trans am, white, gold diamond spoke wheeles, 86 wing, 5 spd, 3:42 Gear Posi, 350, etc.
I miss that car to this day.
http://kaylin4u.tripod.com/transam.html
I've been waiting a long time for this car.
Years ago, I had a 1983 trans am, white, gold diamond spoke wheeles, 86 wing, 5 spd, 3:42 Gear Posi, 350, etc.
I miss that car to this day.
#13
Senior Member
Mine is not, It's from ASCD out of knoxville.( aprox $450 - $500 ) I did cut 2 holes in the hood on the inside to let the air flow straight through, but I have a carbed eng. with no air box. Suncoast creations dose make a simaler hood with the functional air box and all for around $895.00 looks a little diffrent though, HERE IT IS.
You can also get the Ram Air 2 hood with the air box from one of the sponcers I think.
I personally don't like where the air inlets are on the suncoast hood, and i think the RA2 hoods look to big and bulky.
compared to mine...
You can also get the Ram Air 2 hood with the air box from one of the sponcers I think.
I personally don't like where the air inlets are on the suncoast hood, and i think the RA2 hoods look to big and bulky.
compared to mine...
#15
Member
Thread Starter
Well, keep in mind, this is the "before" pics.
I agree with you on the hood. I like yours better. I'll look into yours and see if I can't "rig" an induction from that setup later for mine.
I love your car.
I'm having the engine pulled out over the weekend. I plan on getting pics of the progress of my car. I'd like to keep in touch if it's okay. You did a great job on your car.
Thanks for all the information too.
Kelly
I agree with you on the hood. I like yours better. I'll look into yours and see if I can't "rig" an induction from that setup later for mine.
I love your car.
I'm having the engine pulled out over the weekend. I plan on getting pics of the progress of my car. I'd like to keep in touch if it's okay. You did a great job on your car.
Thanks for all the information too.
Kelly
#17
Member
Thread Starter
Scott, can you send me your email address to kaylin4u@yahoo.com?
I just wanted to keep you posted on my progress. We got the engine out over the weekend, and I just pressure sprayed the engine compartment
I got pics of Daniel and my nephew Justin pulling the old engine out friday. http://kaylin4u.tripod.com/transam.html
I just wanted to keep you posted on my progress. We got the engine out over the weekend, and I just pressure sprayed the engine compartment
I got pics of Daniel and my nephew Justin pulling the old engine out friday. http://kaylin4u.tripod.com/transam.html
#18
Senior Member
Join Date: Oct 2002
Location: Herrin IL
Posts: 694
Likes: 0
Received 0 Likes
on
0 Posts
Car: 98 Trans Am 85 Trans Am
Engine: LS1 Lg4
Transmission: 4L60E 700r4
Axle/Gears: 3.23 2.73
Hey I am form Sprinfield and would like to invite you to check out my car club at www.mtfba.org. Maybe some of us can haelp you find what you are looking for.
#20
Supreme Member
Join Date: Jun 2002
Location: North East GA
Posts: 2,221
Likes: 0
Received 44 Likes
on
40 Posts
Car: 1989 Firebird
Engine: 5.7 LS1
Transmission: T56
A new dash pad can be gotten at http://www.paddockparts.com/ they are not cheap, you should be able to get a good one on ebay though.
#21
Junior Member
Join Date: Jul 2003
Location: Gray, TN
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 TA
Engine: 350
Transmission: 700R4
Carpet
Originally posted by scott's85T/A
Carpet, everyone here seems to like the ACC carpet. I got mine from www.1aautomotive.com About $200.00 for front and rear, or you can get just the front for a little cheaper.
Carpet, everyone here seems to like the ACC carpet. I got mine from www.1aautomotive.com About $200.00 for front and rear, or you can get just the front for a little cheaper.
I'm new to the forum. Just bought a one owner 87 Trans Am about a month ago. 168k on the clock, needs lots of things, but that's what makes it a project, huh? Still runs decent and almost everything works.
I got a set of seats out of a 97. Ordered a console and radio pod from Hawk. Now I'm looking for carpet. So, ACC carpet is a good deal? How is the jute backing and the fit? I had been looking at ACS carpet from JC Whitney, but they're about $280 for a complete set.
Scott, your interior looks great. I was wondering if a 4th gen console would fit. Did you have any problems or have to fab any brackets? BTW, I live in Gray TN too.
#22
Supreme Member
Join Date: Jun 2002
Location: North East GA
Posts: 2,221
Likes: 0
Received 44 Likes
on
40 Posts
Car: 1989 Firebird
Engine: 5.7 LS1
Transmission: T56
The quality of ACC carpet looks really good. I haven't put it in the car yet I just got done striping the interior out before work today. I am going to weld the sfc in sat. So some time next week I can let you know how it fits. Some people complain about it and some love it. The best thing is it looks sooo good compaired to the old, even the old under things so it didn't get dirty and faded.
#24
Supreme Member
iTrader: (1)
Originally posted by Aviator857
The quality of ACC carpet looks really good. I haven't put it in the car yet I just got done striping the interior out before work today. I am going to weld the sfc in sat. So some time next week I can let you know how it fits. Some people complain about it and some love it. The best thing is it looks sooo good compaired to the old, even the old under things so it didn't get dirty and faded.
The quality of ACC carpet looks really good. I haven't put it in the car yet I just got done striping the interior out before work today. I am going to weld the sfc in sat. So some time next week I can let you know how it fits. Some people complain about it and some love it. The best thing is it looks sooo good compaired to the old, even the old under things so it didn't get dirty and faded.
Thread
Thread Starter
Forum
Replies
Last Post
LT1Formula
Engine/Drivetrain/Suspension Parts for Sale
20
11-14-2015 12:02 AM