Salt Lake city machine shop!
#1
Junior Member
Thread Starter
iTrader: (1)
Join Date: Oct 2007
Location: Copper Pit, Utah
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1990 IROC-Z, 1992 Z-28
Engine: 5.0, 5.7
Transmission: one of each
Axle/Gears: Both cars have them!
Salt Lake city machine shop!
Not sure if this is where I should post this or not, so feel free to move this if needed.
Like that title says i am looking for a machine shop in the Wasatch Front area. Anyone have a solid recommendation? I sure miss Ron at RPM in West Valley.
Like that title says i am looking for a machine shop in the Wasatch Front area. Anyone have a solid recommendation? I sure miss Ron at RPM in West Valley.
#3
#4
Supreme Member
iTrader: (31)
Re: Salt Lake city machine shop!
Not sure if you guys are still shopping around for a good machine shop, but my recommendation is Horsepower Farm up in Benson, UT. Benson is in the Cache Valley, not far from Logan. Ask for Casey. They do mostly race motors, and their machine work is top notch! I had Casey freshen up my AFR 190's, and they turned out great. Speaking of AFR, they're also a certified distributor for AFR. I live in the Ogden area, but it's well worth the drive. Take I-15 past Tremonton, get off on the Riverside exit, and just take State Road 30 over into Cache Valley. State Road 30 drops you off within a mile or two of their shop. Here's their phone # (435) 753-0663, Their prices are much more reasonable than any of the Ogden area shops.
#5
Member
Re: Salt Lake city machine shop!
I'm very lucky to live within 15 minutes of HP farms
Thread
Thread Starter
Forum
Replies
Last Post