my engine build... LOTS OF PICS
#1
Member
Thread Starter
Join Date: Aug 2013
Location: Milltown, NJ
Posts: 390
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 iroc, 02 v6 camaro
Engine: 350 HSR, 3800 V6
Transmission: T56, WCT5
Axle/Gears: 9in 4.11 posi, 3.23 LSD
my engine build... LOTS OF PICS
i figured id start a project thread. ive been collecting parts for my motor build for the past two months. i have basically everything i need to drop the motor in aside from a few small bits.
the setup is as follows:
new GM L98 replacement shortblock
RHS 200cc/64cc aluminum heads
comp cams xr276hr
comp cams 1.6 ratio roller rockers
comp hydraulic lifters
comp double roller timing chain
Holley Stealth Ram
26lb injectors
ARP hardware throughout
Fel Pro 1094 .015comp head gaskets
should be in the area of 10.5/1 compression
painted with por15 engine enamel
valve covers are pro-forms slant edge product line
going in the car this spring and will be driven to Ocean City MD for cruise weekend
as of right now pics are just mocked ups, let me know what you think or if you have any questions
thing is massive...
the setup is as follows:
new GM L98 replacement shortblock
RHS 200cc/64cc aluminum heads
comp cams xr276hr
comp cams 1.6 ratio roller rockers
comp hydraulic lifters
comp double roller timing chain
Holley Stealth Ram
26lb injectors
ARP hardware throughout
Fel Pro 1094 .015comp head gaskets
should be in the area of 10.5/1 compression
painted with por15 engine enamel
valve covers are pro-forms slant edge product line
going in the car this spring and will be driven to Ocean City MD for cruise weekend
as of right now pics are just mocked ups, let me know what you think or if you have any questions
thing is massive...
Last edited by 86iroct5; 02-28-2014 at 07:28 AM.
#2
Supreme Member
Join Date: Apr 2010
Location: Modesto, California
Posts: 1,015
Likes: 0
Received 5 Likes
on
4 Posts
Car: 88 Firebird Formula
Engine: LO5 5.7 TBI/Ebl Flash
Transmission: 700R4
Axle/Gears: 2.73 stock rear end
Re: my engine build... LOTS OF PICS
Goddamn Gorgeous!!! Looks like its going to be a monster
#3
Member
Thread Starter
Join Date: Aug 2013
Location: Milltown, NJ
Posts: 390
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 iroc, 02 v6 camaro
Engine: 350 HSR, 3800 V6
Transmission: T56, WCT5
Axle/Gears: 9in 4.11 posi, 3.23 LSD
#4
Member
Thread Starter
Join Date: Aug 2013
Location: Milltown, NJ
Posts: 390
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 iroc, 02 v6 camaro
Engine: 350 HSR, 3800 V6
Transmission: T56, WCT5
Axle/Gears: 9in 4.11 posi, 3.23 LSD
Thread
Thread Starter
Forum
Replies
Last Post