Pictures of my new paint job!
Thread Starter
Member
Joined: Dec 2001
Posts: 456
Likes: 0
From: Pasadena, Texas
Car: 2001 Camaro SS
Engine: LS1
Transmission: A4
Axle/Gears: 3.23
Pictures of my new paint job!
I'v had it for a few weeks now, but I finally got the pictures developed yesterday... Tell me what you think
BTW, the pics are probably huge... :lala:
BTW, the pics are probably huge... :lala:
Last edited by DSLDUDE2001; Aug 28, 2002 at 05:25 PM.
Trending Topics
Thread Starter
Member
Joined: Dec 2001
Posts: 456
Likes: 0
From: Pasadena, Texas
Car: 2001 Camaro SS
Engine: LS1
Transmission: A4
Axle/Gears: 3.23
I have more pics, but I dont want to hog too much bandwidth...
Me and my dad did all the hard work and took everything off that we could, and then we took it to macco... It turned out great, because we didnt leave anything on the car that they could get overspray on and mess up. They didnt do any body work either, so hopefully this will last. When you go to macco, just make sure that you pay more for a good paint, and do all the work yourself...
Me and my dad did all the hard work and took everything off that we could, and then we took it to macco... It turned out great, because we didnt leave anything on the car that they could get overspray on and mess up. They didnt do any body work either, so hopefully this will last. When you go to macco, just make sure that you pay more for a good paint, and do all the work yourself...
Thread Starter
Member
Joined: Dec 2001
Posts: 456
Likes: 0
From: Pasadena, Texas
Car: 2001 Camaro SS
Engine: LS1
Transmission: A4
Axle/Gears: 3.23
Originally posted by Sonar_un
sweet.. I see you are from Houston also.. thats coo
You should come to one of our gatherings sometime.
sweet.. I see you are from Houston also.. thats coo
You should come to one of our gatherings sometime.
Thread Starter
Member
Joined: Dec 2001
Posts: 456
Likes: 0
From: Pasadena, Texas
Car: 2001 Camaro SS
Engine: LS1
Transmission: A4
Axle/Gears: 3.23
Thanks!
I have all the pictures uploaded on my site...
http://www.camaro-rs.0catch.com/My_Car/My_Car.htm
I have all the pictures uploaded on my site...
http://www.camaro-rs.0catch.com/My_Car/My_Car.htm
Supreme Member
Joined: Nov 2001
Posts: 1,526
Likes: 0
From: Cleveland, OH
Car: '87 Camaro LT
Engine: 355 L98
Transmission: T56
make sure you do some research on the macco you plan on going to. they're independently owned and quality can vary from place to place. try to get ahold of their previous customers and see what they think, especially those that have had their paint for more than a year
Thread Starter
Member
Joined: Dec 2001
Posts: 456
Likes: 0
From: Pasadena, Texas
Car: 2001 Camaro SS
Engine: LS1
Transmission: A4
Axle/Gears: 3.23
Originally posted by SgtSkip
When you say pay more for good paint, how much more? What should I specify if I take it in?
When you say pay more for good paint, how much more? What should I specify if I take it in?
I was wondering about the spoiler and such. It makes sense to me to remove it. How 'bout the mirrors? Do you have to trailer the car to the shop after you get done, or can you do some disassembly there?
Thread Starter
Member
Joined: Dec 2001
Posts: 456
Likes: 0
From: Pasadena, Texas
Car: 2001 Camaro SS
Engine: LS1
Transmission: A4
Axle/Gears: 3.23
Originally posted by SgtSkip
I was wondering about the spoiler and such. It makes sense to me to remove it. How 'bout the mirrors? Do you have to trailer the car to the shop after you get done, or can you do some disassembly there?
I was wondering about the spoiler and such. It makes sense to me to remove it. How 'bout the mirrors? Do you have to trailer the car to the shop after you get done, or can you do some disassembly there?
Thread Starter
Member
Joined: Dec 2001
Posts: 456
Likes: 0
From: Pasadena, Texas
Car: 2001 Camaro SS
Engine: LS1
Transmission: A4
Axle/Gears: 3.23
I dont remember what color they called it, but it is alot darker/more shiny than the old polo green... I'll try and find out the name later...
Thread Starter
Member
Joined: Dec 2001
Posts: 456
Likes: 0
From: Pasadena, Texas
Car: 2001 Camaro SS
Engine: LS1
Transmission: A4
Axle/Gears: 3.23
about $1000... My dad paid for it, so I didnt really care
Only problem is that he says that he is done spending money on my car and anything else I do is coming out of my pocket
I'm sure you can get just as good of a job for less at macco, but know what your talking about when you go looking.
Oh, the dealer quoted $3000
edit: I had the door jambs, trunk jamb, hood jamb, and any other jambs on the car painted also.
Only problem is that he says that he is done spending money on my car and anything else I do is coming out of my pocket
I'm sure you can get just as good of a job for less at macco, but know what your talking about when you go looking. Oh, the dealer quoted $3000

edit: I had the door jambs, trunk jamb, hood jamb, and any other jambs on the car painted also.
Last edited by DSLDUDE2001; Aug 29, 2002 at 06:04 PM.
Joined: Jul 2000
Posts: 7,386
Likes: 1
From: In a mint Third Gen!
Car: Red 87 IROC-Z28 T-Top
Engine: 5.7 Tuned Port Injection
Transmission: 700R4 Auto
Axle/Gears: BW 9-Bolt 3.27
Always glad to see another Third Gen that wasn't at its nicest made nice again. Thats the way its gotta be.
Thread
Thread Starter
Forum
Replies
Last Post
ambainb
Camaros for Sale
11
Apr 25, 2016 09:21 PM
dustint209
Auto Detailing and Appearance
6
Sep 9, 2015 08:09 AM








