Ground Effects
Thread Starter
Supreme Member

Joined: Jan 2002
Posts: 3,852
Likes: 1
From: Valley of the Sun
Car: 82 Z28
Engine: Al LT1 headed LG4 305
Transmission: TH350
Axle/Gears: 3.73 posi with spacer
Ground Effects
I would like to change the ground effects on my 82 Z-28, is there anything that will bolt onto the currrent ground effects? What about front air dams, i saw one in JC Whitney about a year ago? What about ground effects off a later car like 91-92? Are aftermarket kits any good, i've seen them for $600.
I want my car to look lower and closer to the ground. What would you recommend?
Thanks
I want my car to look lower and closer to the ground. What would you recommend?
Thanks
Senior Member
iTrader: (1)
Joined: Mar 2000
Posts: 609
Likes: 0
From: Charlotte NC
Car: 92 Z28 Z03
Engine: 350
Transmission: 700-R4
Axle/Gears: 2.73 G80
I know for the 91-91 gfx you would need an 86 or newer nose if i am correct. that about all i know sorry im not much help.
You will need a 85- and up nose. You will also need to drill holes in your front fenders, weld metal brackets under your doors, drill holes in your doors, drill holes behind the doors, and drill holes in your rear quarter panels. It's not really that hard to do .
Supreme Member
iTrader: (1)
Joined: Mar 2001
Posts: 4,226
Likes: 6
From: Chesterfield, Indiana
Car: 1991 Z28 Camaro
Engine: 5.7
Transmission: Jasper 700R4 Stage II
Axle/Gears: 3.23 For Now
Originally posted by bradkeith
You will need a 85- and up nose. You will also need to drill holes in your front fenders, weld metal brackets under your doors, drill holes in your doors, drill holes behind the doors, and drill holes in your rear quarter panels. It's not really that hard to do .
You will need a 85- and up nose. You will also need to drill holes in your front fenders, weld metal brackets under your doors, drill holes in your doors, drill holes behind the doors, and drill holes in your rear quarter panels. It's not really that hard to do .
your EXACTLY right! I had a 1984 Z28 (same apperance as the 82) and I had to replace the nose...1985-1992....drill new holes.....a bunch of modifications to make my 84 a clone of a 1992 Z28....I added the rear highrise spoiler too.........there is noway that a 1985-1990 (Z28, RS, IROC-Z) or 1991-1992 (RS,Z28) front nose ground effect wil fit a 1982-1984 Z28 front nose......
Thread
Thread Starter
Forum
Replies
Last Post
Damon
Tech / General Engine
8
Sep 26, 2015 04:29 PM





