Picture Needed Please.
Thread Starter
Supreme Member
Joined: Jan 2001
Posts: 1,244
Likes: 2
From: Kelowna, B.C.
Car: 89 Camaro RS
Engine: 305 TBI
Transmission: 700r4
Axle/Gears: 2.73
Picture Needed Please.

Ok, well I hope there are several people looking at this request.. What I'm looking for is a high resolution Digital picture of the front of a Camaro With Fog Lights, and NO Front Plate. I need it to be head on, the example is a bit high..I'm doing up a RC Car, and I'm making some Graphics for it. So if you can Help I'd really appreciate it. Below is a crappy version of the area I need.
Thanks
(P.S. I hope this doesn't get locked, it is 100% Thirdgen related)
Member
iTrader: (3)
Joined: Aug 2002
Posts: 237
Likes: 1
From: Southern California
Car: '98 Z28 LS1
Engine: LS1
Transmission: 4l60E
Axle/Gears: 373
What exactly is it you need to show in the picture? I have a very good digital camera and an '89 Iroc. The car is painter jet black.
I took the forglamps off and made custom air channels to the filter box. I could take a picture of a picture for you if that would help? Just advise me what you need to key in on.
CALIROCZ28@msn.com
I took the forglamps off and made custom air channels to the filter box. I could take a picture of a picture for you if that would help? Just advise me what you need to key in on.
CALIROCZ28@msn.com
Thread Starter
Supreme Member
Joined: Jan 2001
Posts: 1,244
Likes: 2
From: Kelowna, B.C.
Car: 89 Camaro RS
Engine: 305 TBI
Transmission: 700r4
Axle/Gears: 2.73
What I need in the picture is what I showed in the little pic. But if you took off your fog lights.. it would make it a bit harder. what I'm looking for is just the whole front grill area. I could overlay seperate pictures of fog lights but it might not look right.
Member
iTrader: (3)
Joined: Aug 2002
Posts: 237
Likes: 1
From: Southern California
Car: '98 Z28 LS1
Engine: LS1
Transmission: 4l60E
Axle/Gears: 373
How about a picture from a GM manuel? Or from Chevy Hi-Perf? Perhaps I could find something and then take a picture of it and post it for you? Let me try this and then let me know what you think. Look for it in about 1 hour or less.
Thread Starter
Supreme Member
Joined: Jan 2001
Posts: 1,244
Likes: 2
From: Kelowna, B.C.
Car: 89 Camaro RS
Engine: 305 TBI
Transmission: 700r4
Axle/Gears: 2.73
Ok, thanks.. Though a color photograph would be best.. as I'm trying to make it as realistic as possible. so far I have taken photos of my headlights, signal lights, side marker lights.. Next I'll be doing my tail lights and 3rd brake light.. But since I do not have fog lights on my car (yet).. It's the only one I need.
Thread Starter
Supreme Member
Joined: Jan 2001
Posts: 1,244
Likes: 2
From: Kelowna, B.C.
Car: 89 Camaro RS
Engine: 305 TBI
Transmission: 700r4
Axle/Gears: 2.73
Ok, well, thats a good head on shot.. but instead of the whole car.. it needs to be just the grill area. Thanks
Trending Topics
Thread Starter
Supreme Member
Joined: Jan 2001
Posts: 1,244
Likes: 2
From: Kelowna, B.C.
Car: 89 Camaro RS
Engine: 305 TBI
Transmission: 700r4
Axle/Gears: 2.73
So far IROCThe5.7L, was the one on the right track. See how the picture is taken directly head on. But instead of the whole picture being just the car. It needs to be just the grill area. All one needs to do with their digital camera on a nice day is go down low to the front of the car, and make the grill area fill the picture.. If you have one. Please do not compress the file, Jpegs at 100% quality would be ok too.. just e-mail it to me at tony@kelownafastelectrics.com
Thanks.
P.S. Sorry for being so picky.. this graphic will be printed at a high quality, and will be on the front of the car, which is why I need the picture from head on. Not from and other angle. Also A RE-SIZED image is not any good.. it's not a clear 'in focus' image.
Thanks.
P.S. Sorry for being so picky.. this graphic will be printed at a high quality, and will be on the front of the car, which is why I need the picture from head on. Not from and other angle. Also A RE-SIZED image is not any good.. it's not a clear 'in focus' image.
Senior Member

Joined: Feb 2002
Posts: 830
Likes: 0
From: Lehigh Valley, PA
Car: 00 T/A Firehawk
Engine: 346ci LS1
Transmission: MN6
Axle/Gears: 3.42 LSD
FastElectrics - Be sure to check your e-mail. I sent you one of mine at high res, I wanted to post it here but I forgot about the size limits...
Thread Starter
Supreme Member
Joined: Jan 2001
Posts: 1,244
Likes: 2
From: Kelowna, B.C.
Car: 89 Camaro RS
Engine: 305 TBI
Transmission: 700r4
Axle/Gears: 2.73
Ok, thats a nice shot.. but still to high.. it should be down directly in front of the grill. 1260x960 is a good size.. but of only the grill. not the whole car. Thanks Though.
Thread Starter
Supreme Member
Joined: Jan 2001
Posts: 1,244
Likes: 2
From: Kelowna, B.C.
Car: 89 Camaro RS
Engine: 305 TBI
Transmission: 700r4
Axle/Gears: 2.73
This example should help clear things up.. This is a cropped picture of IROCThe5.7L 's picture. I'm looking for exactly this, but nice and clear and big.. like 1024x768, or the 1280x960. This way it will show the detail of the fog lights and grill area.
*pic removed * by me.
*pic removed * by me.
Last edited by FastElectrics; Dec 23, 2003 at 06:21 PM.
Member
Joined: Oct 2003
Posts: 352
Likes: 0
From: ME.
Car: 1991 Z-28
Engine: TPI
Transmission: 5-speed Rear:3.73
I have a pic but it wont let me put it up cause its too big eMAIL me or somethin if you want to take a look at it...I tryed to mail you but I couldnt do it through here..
Last edited by Z dude; Dec 23, 2003 at 06:30 PM.
Thread Starter
Supreme Member
Joined: Jan 2001
Posts: 1,244
Likes: 2
From: Kelowna, B.C.
Car: 89 Camaro RS
Engine: 305 TBI
Transmission: 700r4
Axle/Gears: 2.73
Z dude came through with a perfect picture.. Thanks everyone for the help. Here is a small version of the one I have received.
1513x960 is the original size
1513x960 is the original size
Thread
Thread Starter
Forum
Replies
Last Post
Street Lethal
Engine/Drivetrain/Suspension Parts for Sale
0
Aug 12, 2015 11:33 AM







