Progress Pics
Thread Starter
Supreme Member
iTrader: (17)
Joined: Feb 2003
Posts: 2,182
Likes: 1
From: Buckley AFB, CO / Crestview, FL
Car: 83 Z-28
Engine: LG4
Transmission: 700R4
Axle/Gears: 02 WS6 Rear w/3:42
Progress Pics
Here are some progress pics of my 83 Z. Everything is going smoothly. Used to be plain jain a month or two ago. Not anymore
Some new things I got done were full tuneup, grid taillights, 91-92 gfx, and 15% tint. I really like the tint. Its dark enough during the day and you can see fine at night. I also swapped the whole interior from my 84 into the 83. It looks a ton better than brown. I swapped the doors too and added power windows, locks and trunk release. I scored a new front 91-92 gfx of ebay for cheap! Have to give props to 82FirebirdTA for holding it for me
I will be getting a 3 inch cowl soon and then get it painted black. So dont hate on my multi color car
Any suggestions on a shade of black? I still need to sand the rear bumper cover since the paint is chipping. Im also going to be filling in the spoiler holes and shaving the antenna as well. Can I fiberglass those holes? Would it be better than body filler? here are some pics.
Some new things I got done were full tuneup, grid taillights, 91-92 gfx, and 15% tint. I really like the tint. Its dark enough during the day and you can see fine at night. I also swapped the whole interior from my 84 into the 83. It looks a ton better than brown. I swapped the doors too and added power windows, locks and trunk release. I scored a new front 91-92 gfx of ebay for cheap! Have to give props to 82FirebirdTA for holding it for me
I will be getting a 3 inch cowl soon and then get it painted black. So dont hate on my multi color car
Any suggestions on a shade of black? I still need to sand the rear bumper cover since the paint is chipping. Im also going to be filling in the spoiler holes and shaving the antenna as well. Can I fiberglass those holes? Would it be better than body filler? here are some pics.
Last edited by Zrated83; Apr 11, 2004 at 01:28 AM.
Senior Member

Joined: Jul 2003
Posts: 773
Likes: 2
From: Raleigh, NC
Car: 1988 Pontiac Firebird Trans Am Vert
Engine: 5.0L TPI
Transmission: 5-Speed
Axle/Gears: 3.08
omg those are my wheels!
I have established that they are made by American Racing, but I do not know which model.


Very cool!
I have established that they are made by American Racing, but I do not know which model.
Very cool!
Trending Topics
Thread Starter
Supreme Member
iTrader: (17)
Joined: Feb 2003
Posts: 2,182
Likes: 1
From: Buckley AFB, CO / Crestview, FL
Car: 83 Z-28
Engine: LG4
Transmission: 700R4
Axle/Gears: 02 WS6 Rear w/3:42
Originally posted by V6camaroman
everything looks good so far. what happened to the 84 z u took all the parts off from? what size rims and tires do you have on that as well?
everything looks good so far. what happened to the 84 z u took all the parts off from? what size rims and tires do you have on that as well?
I was in a wreck and someone rearended the crap out of me and the rear quarter panel caved in. The rims are 15's but im not sure of the width since they were on the car when I bought it. The tires are 265/50R/15's. I like em. They make the car look mean
I also got a 85-90 Iroc nose in the shed. Im still working on it but it will be on the car soon. Originally posted by DigitalMonarch0
omg those are my wheels!
I have established that they are made by American Racing, but I do not know which model.
Very cool!
omg those are my wheels!
I have established that they are made by American Racing, but I do not know which model.
Very cool!
Supreme Member
Joined: May 2001
Posts: 2,228
Likes: 2
From: Your neighbor's hood, MD
Car: 1987 Camaro Z28 IROC-Z
Engine: 5.7L TPI
Transmission: T5
Axle/Gears: 3.42:1
Originally posted by DigitalMonarch0
omg those are my wheels!
I have established that they are made by American Racing, but I do not know which model.
Very cool!
omg those are my wheels!
I have established that they are made by American Racing, but I do not know which model.
Very cool!
Supreme Member
Joined: May 2001
Posts: 2,228
Likes: 2
From: Your neighbor's hood, MD
Car: 1987 Camaro Z28 IROC-Z
Engine: 5.7L TPI
Transmission: T5
Axle/Gears: 3.42:1
Looking good btw, a little more tweaking on the gfx alignment and you should be all set once you get the new nose on there and get it all painted up. Keep the pics coming!
Originally posted by ES87iroc
They are American Racing model AR-26, discontinued in 1998. Hope this helps! (I have a set of my malibu for now, bought them new when they were on closeout...)
They are American Racing model AR-26, discontinued in 1998. Hope this helps! (I have a set of my malibu for now, bought them new when they were on closeout...)
Supreme Member
iTrader: (1)
Joined: Feb 2003
Posts: 1,122
Likes: 1
From: THE QUADS
Car: FBODYS
Engine: ALWAYS 8'S
Transmission: ALWAYS MENTAL
Axle/Gears: RUSTY AND BRAND NEW
They are a generic wheel. About 13 different companys made them. That is why so many people have different caps for them.
Your ride is lookin good, don't stop now.
Your ride is lookin good, don't stop now.
Thread Starter
Supreme Member
iTrader: (17)
Joined: Feb 2003
Posts: 2,182
Likes: 1
From: Buckley AFB, CO / Crestview, FL
Car: 83 Z-28
Engine: LG4
Transmission: 700R4
Axle/Gears: 02 WS6 Rear w/3:42
here is a pic of what my hood looks like. Can't wait to get it! After that its paint time 

Supreme Member
iTrader: (5)
Joined: Jan 2002
Posts: 13,622
Likes: 5
From: Orland Park, IL
Car: 1984 Z28
Engine: SLOW carbed ls
Transmission: TH400 with brake, 8" PTC converter
Axle/Gears: moser 9" 4.11
looks like you're doing a pretty decent job on getting that car where it needs to be
Joined: May 2002
Posts: 2,301
Likes: 13
From: Chicagoland
Car: 1983 Daytona Trans Am
Engine: LG4
Transmission: T5
Axle/Gears: 3.73
Re: Progress Pics
Originally posted by mike83z-28
Have to give props to 82FirebirdTA for holding it for me
Have to give props to 82FirebirdTA for holding it for me
Thread
Thread Starter
Forum
Replies
Last Post
Hotrodboba400
Firebirds for Sale
3
Dec 10, 2019 07:07 PM








