Several months ago someone here at thirdgen said they could buy the grills from were they work.who ever that is would you please get in touch with me.I have the lights now but I don't want to cut the finned grill I have.In my opinion it would look like ****.
THanks guys

------------------
Kevin S
10.9 @ 62.87 (1/8 mile)
89 RS 2.8(bored .030)
B&M shift Improver
B&M Mega Shifter
Perma Cool trans cooler
Accel Wires,
Ignition module,
Super coil
Streetrunner chip(for now)
Flowmaster
1.52 Roller rockers

Things You Will Never Hear a Man Say....

Damn, too bad this car isn't a four cylinder.

The grille is available from a dealership and not to expensive. My book is a few years outdated,, but it's a ballpark price

Grille w/lamps & w/o z-28, iroc - $30
p/n 1408 0490
Grille w/lamps & w/z-28, iroc - $34
p/n 1408 1132

Keep in mind too, these are collition est. prices for insurance(cheaper than walk in price) but you shouldn't get rakeed too bad, they are just grilles after all.
hope that helps some

------------------
<A HREF="http://anzwers.org/free/gta" TARGET=_blank>87 Firebird
84 Camaro</A>
Virtual Racing

- intelligence is learned, ignorance is universal

Thanks deadbird.

------------------
Kevin S
10.9 @ 62.87 (1/8 mile)
89 RS 2.8(bored .030)
B&M shift Improver
B&M Mega Shifter
Perma Cool trans cooler
Accel Wires,
Ignition module,
Super coil
Streetrunner chip(for now)
Flowmaster
1.52 Roller rockers

Things You Will Never Hear a Man Say....

Damn, too bad this car isn't a four cylinder.

Classic Industries sells them for $45 or so. Email me if you want any specifics!

------------------
Jason E
'89 Camaro RS 2.8
Medium Grey Metallic/AT/T-tops/all power
Hypertech chip/2 K&N filters/Modded air box
Eclipse CD/Eclipse 100x4 amp/Boston4x6 plates, 6x9 RX 3 ways/ALL Monster's goodies
Alpine Alarm w/ Keyless entry
IROC tailights/t-windows

Hey this is a picture of my car with the RS grill cut for fog lights. http://albums.photopoint.com/j/View?...781&p=29495767
http://albums.photopoint.com/j/View?...781&p=29492902 http://albums.photopoint.com/j/View?...781&p=29492901

[This message has been edited by Blue92 (edited September 28, 2000).]

take a look at the post above and see what you think?

Looks damn good Blue.
I cut mine out yesterday afternoon.The lights I have are bigger so it required a bigger hole anyway I figured what the hell! I plan on buying a new grill soon so I decided to go ahead and cut.It doesn't look to shabby.I need to sand some and paint alittle.But it will work.

------------------


[This message has been edited by Kevin S (edited September 28, 2000).]