Whats your 3rd gen look like in its home?
Member


Joined: Sep 2004
Posts: 224
Likes: 4
From: Boston, MA
Car: 1983 Pontiac Trans Am
Engine: 305 H.O. VIN "H" LG4 (For now...)
Transmission: 5 Speed Manual
Axle/Gears: Stock Posi Disc
project
Lots of AWESOME garage setups here!
This is my Project 15th Anniversary Trans Am in its temporary home:
My buddy Ricardo's back yard under a car tent!
The broken baseball bat came with the car... I use it to hold the hood open for now...
Evuntually it will get a better home and maybe even be finished someday.
This is my Project 15th Anniversary Trans Am in its temporary home:
My buddy Ricardo's back yard under a car tent!
The broken baseball bat came with the car... I use it to hold the hood open for now...
Evuntually it will get a better home and maybe even be finished someday.
Member
Joined: Dec 2001
Posts: 456
Likes: 4
From: Concordia, MO, USA
Car: 89 Formula, WS6
Engine: LB9/peanut cam :(
Transmission: 700R4
Here's mine.
That's right folks. It's in a barn. It's an 83 Z28 which I bought as a parts car in 98. I used it's parts on an 87 Camaro which would later have the misfortune of being T-boned by a tree, leaving me with all the required parts for the "resurrection" of this car. Given the info I got from a carfax report, the chassis hasn't seen the road since 93.
That's right folks. It's in a barn. It's an 83 Z28 which I bought as a parts car in 98. I used it's parts on an 87 Camaro which would later have the misfortune of being T-boned by a tree, leaving me with all the required parts for the "resurrection" of this car. Given the info I got from a carfax report, the chassis hasn't seen the road since 93.
Member
Joined: Dec 2001
Posts: 456
Likes: 4
From: Concordia, MO, USA
Car: 89 Formula, WS6
Engine: LB9/peanut cam :(
Transmission: 700R4
and here she is again, in her new home (my garage). Thus far, just about everything is done except paint and body work. While road testing, I actually drove her out to the barn where she slept....no make that was dead, for 5 years. The car stalled when it got near the barn, like to say, "nope...not going in there again".
Last edited by black89ws6; Nov 17, 2004 at 05:16 PM.
Supreme Member
Joined: Aug 2004
Posts: 4,168
Likes: 3
From: Marietta, GA
Car: '91 Firebird Convertible
Engine: 305 TBI (LO3)
Transmission: 700r4, Vette Servo
Axle/Gears: 3.27 9 Bolt, PBR disks
Originally posted by black89ws6
and here she is again, in her new home (my garage). Thus far, just about everything is done except paint and body work. While road testing, I actually drove her out to the garage where she slept....no make that was dead, for 5 years. The car stalled when it got near the barn, like to say, "nope...not going in there again".
and here she is again, in her new home (my garage). Thus far, just about everything is done except paint and body work. While road testing, I actually drove her out to the garage where she slept....no make that was dead, for 5 years. The car stalled when it got near the barn, like to say, "nope...not going in there again".
They do seem to have a mind of their own at times.
Supreme Member
iTrader: (17)
Joined: Feb 2003
Posts: 2,182
Likes: 1
From: Buckley AFB, CO / Crestview, FL
Car: 83 Z-28
Engine: LG4
Transmission: 700R4
Axle/Gears: 02 WS6 Rear w/3:42
pwdbychevy do you have any front shots of your pilot light setup? I saw a pic in an older thread while I was searching and it looked sweet.
Supreme Member
Joined: Aug 2001
Posts: 1,337
Likes: 26
From: Wesley Chapel, Florida
Car: 1991 Camaro Z28
Engine: Dart SHP 406ci T88 turbo
Transmission: T56
Axle/Gears: QP 35 spline Ford 9" 3.50 gears
Originally posted by Spdfrk1990
pwdbychevy are those GTS black out they look a little nicer then mine.
pwdbychevy are those GTS black out they look a little nicer then mine.
Supreme Member
Joined: Aug 2001
Posts: 1,337
Likes: 26
From: Wesley Chapel, Florida
Car: 1991 Camaro Z28
Engine: Dart SHP 406ci T88 turbo
Transmission: T56
Axle/Gears: QP 35 spline Ford 9" 3.50 gears
Originally posted by mike83z-28
pwdbychevy do you have any front shots of your pilot light setup? I saw a pic in an older thread while I was searching and it looked sweet.
pwdbychevy do you have any front shots of your pilot light setup? I saw a pic in an older thread while I was searching and it looked sweet.
Last edited by pwdbychevy; Nov 18, 2004 at 09:22 PM.
Supreme Member
Joined: Aug 2001
Posts: 1,337
Likes: 26
From: Wesley Chapel, Florida
Car: 1991 Camaro Z28
Engine: Dart SHP 406ci T88 turbo
Transmission: T56
Axle/Gears: QP 35 spline Ford 9" 3.50 gears
Originally posted by mike83z-28
pwdbychevy do you have any front shots of your pilot light setup? I saw a pic in an older thread while I was searching and it looked sweet.
pwdbychevy do you have any front shots of your pilot light setup? I saw a pic in an older thread while I was searching and it looked sweet.
Last edited by pwdbychevy; Nov 18, 2004 at 09:23 PM.
Originally posted by Spdfrk1990
I like those head lights.Not quite big enough though need some bigger ones or some beemer head lights.
I like those head lights.Not quite big enough though need some bigger ones or some beemer head lights.
Supreme Member
Joined: Aug 2001
Posts: 1,337
Likes: 26
From: Wesley Chapel, Florida
Car: 1991 Camaro Z28
Engine: Dart SHP 406ci T88 turbo
Transmission: T56
Axle/Gears: QP 35 spline Ford 9" 3.50 gears
Originally posted by mike83z-28
the head light setup looks awesome!
how is the lighting at night?
the head light setup looks awesome!
how is the lighting at night? Supreme Member
Joined: Aug 2001
Posts: 1,337
Likes: 26
From: Wesley Chapel, Florida
Car: 1991 Camaro Z28
Engine: Dart SHP 406ci T88 turbo
Transmission: T56
Axle/Gears: QP 35 spline Ford 9" 3.50 gears
Originally posted by CaysE
Or three lights on each side like a Mazda 6. Would look mean as hell!
Or three lights on each side like a Mazda 6. Would look mean as hell!
Supreme Member
Joined: Apr 2003
Posts: 2,070
Likes: 0
From: Tempe, Arizona
Car: 96 Silverado/99 Suburban
Engine: 700 cubic inches of 'Muican Awesome
Transmission: 4L80/4L60
Axle/Gears: Chunky/Clunky
Here's mine. Garage is LINED with crafstman tools and my Camaro gets em' all! And I can play the shiny game, too... 
Bruce (90RS305)

Bruce (90RS305)
Senior Member
Joined: May 2002
Posts: 813
Likes: 1
From: Summerville, SC
Car: 91 RS Camaro
Engine: 305 TBI
Transmission: 700R4
Axle/Gears: 2.73
Originally posted by acescarrsRS
Close. It's a 66 Mustang GT. This one had the sequential tailight option. The other car wrapped up next to it is my 68 Mustang Fastback. Shhhhhhh......I'm a Ford lover too lol
Close. It's a 66 Mustang GT. This one had the sequential tailight option. The other car wrapped up next to it is my 68 Mustang Fastback. Shhhhhhh......I'm a Ford lover too lol
Supreme Member
iTrader: (1)
Joined: Mar 2002
Posts: 2,467
Likes: 1
From: The nation's capital
Car: 91 RS
Engine: 350 TBI
Transmission: 700R4
Re: :-)
Originally posted by johnnyzombie
i have no garage but i got a beautiful wife to eccesorize my camaro
i have no garage but i got a beautiful wife to eccesorize my camaro
oh, the car looks ok too.
Supreme Member
iTrader: (33)
Joined: Jul 2000
Posts: 5,945
Likes: 1
From: Boosted Land
Car: 92 Z28
Engine: Boosted LSX
Originally posted by Gr89RS
TPl383- Damn!! that is going to be one hell of a car-keep up the good work!!!
:rockon:
TPl383- Damn!! that is going to be one hell of a car-keep up the good work!!!
Mini Tubbed it 1 weekend. Need to weld in the wells now.
2weekends to from targa top to Vert.
When it is done it will wear 17x11's with 315s out back 17x9.5 up front.
Stroker motor with single turbo kit.
Complete 97 TA int.
Supreme Member
iTrader: (33)
Joined: Jul 2000
Posts: 5,945
Likes: 1
From: Boosted Land
Car: 92 Z28
Engine: Boosted LSX
I can take some and e-mail them to you. befor I finish it up. You can use standard tubbs and cut em down. I myself have to make my own because of the vert top when Its down. Send me a e-mail to remind me to get some better pictures. for ya.
Originally posted by Kory-88Iroc 350 tpi
tpi 383 do you have any pics of the mini tubbing? I have been thinking about that for a while.
Thanks,
Kory
tpi 383 do you have any pics of the mini tubbing? I have been thinking about that for a while.
Thanks,
Kory
Junior Member
Joined: Aug 2004
Posts: 2
Likes: 0
From: Millington, TN
Car: White 1988 GTA
Engine: 350 TPI
Transmission: 700R4
No garage, only a carport that I let the wife park her Van in... But this is the GTA the day I bought it. Has a better shine now, but alot of work to be done.
Last edited by White88GTA; Nov 23, 2004 at 09:03 PM.
Here is my 82 in my garage it still runs and drive but sure isnt the best looking car of all anymore. its a project and its slowly getting there hopefully over the winter i can get the 3 speed auto out and the 5 speed in
I just want to say if you dont have a garage and you dont drive your car much dont leave it out with a cover on. I did that for 2 years and it rusted every thing over I now have it all apart redoing it atleast it has a garage now.
Senior Member
Joined: May 2002
Posts: 555
Likes: 0
From: Rockford,Iowa
Car: 1983 WS-6 Trans Am
Engine: 1999 L31 5.7 Vortec
Transmission: 5 speed
Axle/Gears: Auburn Limited-slip w/3:73 gears
Well, here's where mine stay, along with my truck and my wifes Bonneville, and 4 motorcycles.
It's nice to have a big garage, it's 28' deep, and 48' wide
It's nice to have a big garage, it's 28' deep, and 48' wide

Last edited by 1tinindian; Nov 25, 2004 at 02:19 AM.
Joined: Dec 2000
Posts: 2,361
Likes: 2
From: Buffalo, NY
Car: 1984 Trans Am
Engine: LT1
Transmission: T56
Axle/Gears: 10 bolt w/ 4.10 gears
TPI383, I'm REALLY looking forward to seeing how that 'vert comes out! it looks like it'll be killer. Here is how mine looks right now. I just got a nice propane heater that puts out 80,000 BTUs, so I'm looking to get a lot done this winter!
Joined: Dec 2000
Posts: 2,361
Likes: 2
From: Buffalo, NY
Car: 1984 Trans Am
Engine: LT1
Transmission: T56
Axle/Gears: 10 bolt w/ 4.10 gears
and here is the L98, console tv that's even older than the bird, home-made poker table, and some other goodies
Junior Member
Joined: May 2004
Posts: 16
Likes: 0
From: southwest Iowa
Car: 82 Camaro Z28
Engine: Long Rod 383
Transmission: 350 with 3300 stall converter & 4.10 gears.
Here is it's home...54x26..
Smaller after you get everything in there, but still can move around a little...
.
Smaller after you get everything in there, but still can move around a little...
.
Last edited by meanfarmer; Dec 8, 2004 at 08:25 PM.
Thread
Thread Starter
Forum
Replies
Last Post
bjpotter
History / Originality
47
Jan 22, 2019 12:27 PM




why hasnt some1 tried this yet.

