I know one of the guys on this board has the wheels off of the S-10 X'tremes and I now have a chance to pick some up for $300 including the tires and I'm wondering what size of back spacers I will need to purchase for them if any. Thanks in advance.

------------------
1989 IROCZ28, 5.7 liter TPI, 700R-4, 2.77 Rear, Gutted Air Boxes, Flowmaster 80 series muffler with dual 3 1/2" tips, Clarion 8575 Head, Infintiy Kappa 4x6 plates, Stock 6x9's, Alumapro 10" Aluminum Sub in sealed box, Orion 400 watt amp

[This message has been edited by IROC350TPI (edited December 21, 2000).]

 

I've seen a few people ask about this topic. They say their suppose to bolt up with no problem and that you don't need any spacers. Well thats what they say anyway. I've wanted to do that to my car too, cause it really looks sharp. Let me know if you do it or find out. thanks

 

If I remember, S10's used pretty much all the front end components of a thrirdgen, i.e. spindles, brakes, so spacing should be the same. I've also heard the rear end is the same length as a 3rd gen. Time for a tape measure and borrow a friends S-10.

------------------
Rob P
89RSconvtZZ4TPI
92Z28convt5spd
71Impala convt 402BB
BETTER DRIVING THRU SUPERIOR HORSEPOWER!