Cheap and easy appearance helper
Thread Starter
Supreme Member
Joined: Oct 2002
Posts: 2,378
Likes: 0
From: Thornton colorado
Car: 91 Camaro RS
Engine: TBI
Transmission: 700r4
Cheap and easy appearance helper
I think everyone needs to hit they're wheel wells with some nice black paint, mine were disgusting and since i am showing at the rocky mountain rod and custom show(only the biggest indoor show in colorado) i needed to look good, also painted drums, waxing her tommorrow, vacuuming then it gets off the jack stands to take it to move in on tuesday, at the show complex till sunday night and then it goes back up on the stands for the airride install
The painted brakes are just a quick fix until i get some big ones to fill out the 18's that are coming
Before
The painted brakes are just a quick fix until i get some big ones to fill out the 18's that are coming
Before
Thread Starter
Supreme Member
Joined: Oct 2002
Posts: 2,378
Likes: 0
From: Thornton colorado
Car: 91 Camaro RS
Engine: TBI
Transmission: 700r4
after, its a little glossy, still wet
shocks will also be gone soon, took off that plastic skirting and painted it seperate
shocks will also be gone soon, took off that plastic skirting and painted it seperate
Thread Starter
Supreme Member
Joined: Oct 2002
Posts: 2,378
Likes: 0
From: Thornton colorado
Car: 91 Camaro RS
Engine: TBI
Transmission: 700r4
and the back, got a little carried away and got the spring, no biggie since its getting ousted shortly, time to giver a good cleaning and maybe win something
Supreme Member
iTrader: (5)
Joined: Jan 2002
Posts: 13,622
Likes: 5
From: Orland Park, IL
Car: 1984 Z28
Engine: SLOW carbed ls
Transmission: TH400 with brake, 8" PTC converter
Axle/Gears: moser 9" 4.11
looks like undercoating but really really shiny, hopefully you hit it with some satin or semi-gloss and it's just reflecting off the flash on the camera, i have to do my car sometime this winter as well, even though it's not too bad yet, still is an eyesore.
Thread Starter
Supreme Member
Joined: Oct 2002
Posts: 2,378
Likes: 0
From: Thornton colorado
Car: 91 Camaro RS
Engine: TBI
Transmission: 700r4
there was already an undercoating type finish on it, i just went over that after a good scrubbing, its not nearly that glossy in person
Supreme Member
iTrader: (5)
Joined: Jan 2002
Posts: 13,622
Likes: 5
From: Orland Park, IL
Car: 1984 Z28
Engine: SLOW carbed ls
Transmission: TH400 with brake, 8" PTC converter
Axle/Gears: moser 9" 4.11
i was just looking at my sig pic and yours.....our cars look very similar now. just need to get my tint done when spring hits after i finish up the interior and i'm set. great minds think alike don't you think
Trending Topics
Supreme Member
iTrader: (45)
Joined: Dec 2003
Posts: 3,970
Likes: 1
From: Northern, VA
Car: Pair of 92 Z28s
Looks great but just curious...do you guys use the plastic part of the well or just removed those...i dunno what would look better...i think i remember i needed to keep it from a lot of stuff getting in the fenderwells but its not on in ur picture. Did you paint that also or you just not use those?
Thread Starter
Supreme Member
Joined: Oct 2002
Posts: 2,378
Likes: 0
From: Thornton colorado
Car: 91 Camaro RS
Engine: TBI
Transmission: 700r4
Originally posted by §teve
Looks great but just curious...do you guys use the plastic part of the well or just removed those...i dunno what would look better...i think i remember i needed to keep it from a lot of stuff getting in the fenderwells but its not on in ur picture. Did you paint that also or you just not use those?
Looks great but just curious...do you guys use the plastic part of the well or just removed those...i dunno what would look better...i think i remember i needed to keep it from a lot of stuff getting in the fenderwells but its not on in ur picture. Did you paint that also or you just not use those?
I used rustoleum, brushed it on so i didnt get crap everywhere since its in the garage with the 34
Supreme Member
iTrader: (1)
Joined: Mar 2004
Posts: 1,319
Likes: 1
From: Pittsburgh & Allentown PA
Car: 1992 Z28 (Heritage Edition)
Engine: 305 TPI
Transmission: 700R4
Axle/Gears: 2.73 Posi
Looks good, but does that paint have any sort of protective properties?? I guess it depends on if you drive your car alot though (dont know if you do drive it alot, or if its a garage queen).
When i first got my car i sprayed all new 3M rubberized undercoating in the wheel wells and it looked great...even though now its all dull.
When i first got my car i sprayed all new 3M rubberized undercoating in the wheel wells and it looked great...even though now its all dull.
Supreme Member
iTrader: (2)
Joined: Jul 2004
Posts: 1,678
Likes: 0
From: Miami
Car: 1992 Camaro RS
Engine: L03
Transmission: 700R4
Axle/Gears: Stock
I did that to mine after I painted the car (red wheel wells look horrible) and I was surprised to see the difference.
Thread Starter
Supreme Member
Joined: Oct 2002
Posts: 2,378
Likes: 0
From: Thornton colorado
Car: 91 Camaro RS
Engine: TBI
Transmission: 700r4
Yea it looks amazing with the wheels on it and i havent even seen it in day light, got it off the stands out outside today so i could vaccum it, I figure it should last i drive it a fair amount but it doesnt get driven in wet or nasty weather
Supreme Member
iTrader: (45)
Joined: Dec 2003
Posts: 3,970
Likes: 1
From: Northern, VA
Car: Pair of 92 Z28s
heh...when i pulled off the passenger side plastic wheel well on my gf's RS...i found a hole and some carpet above it
rust sucks.
I really need to get time to por15 my car got the stuff right here...i think ill just spray over the factory undercoating with regualar black spray paint i did a minor job when i got the car. I should really take my time pull off the wheels and shoot it all really nice.
rust sucks.
I really need to get time to por15 my car got the stuff right here...i think ill just spray over the factory undercoating with regualar black spray paint i did a minor job when i got the car. I should really take my time pull off the wheels and shoot it all really nice.
Supreme Member
iTrader: (1)
Joined: Jul 2005
Posts: 2,435
Likes: 1
From: Rockville, Maryland
Car: 1986 Z28 Camaro Gunmetal Gray with
Engine: GM Crate ZZZ HO 350, Edelbrock head
Transmission: Rebuilt 700r4 all TransGo and Beast
Axle/Gears: 10 bolt with 3.73 gears
i should probably do it too. we have some por15 at school and no one will care if i use it. should i get inside the inner fenders too?
Thread
Thread Starter
Forum
Replies
Last Post





