How them under glow kits lookin under 3rd generations?
Thread Starter
Junior Member
Joined: Nov 2005
Posts: 16
Likes: 0
From: Pueblo Colorado
Car: 92 Camaro
Engine: 305 tbi
Transmission: t5
How them under glow kits lookin under 3rd generations?
I wonna put neons under my Car, i am thinkin to get Blue otside and green inside my trunk space where my speakers at, it will look so cool, Wat u guys think of them neons on a 3rd generation of the F Body, u got it? is it easy to install
Member
Joined: Feb 2004
Posts: 395
Likes: 0
From: Trabuco Canyon, CA
Car: 1992 Camaro RS
Engine: 3.1L
Transmission: Auto
Underbody neons just strike me as such an Import Tuner or SEMA show car thing and, to me at least, they just seem out of place on a 3rdgen. Unless you've gone and done a really radical custom job on your car, then I suppose that could be the finishing touch.
But mostly I'm opposed to them in general. Even on my import!
But mostly I'm opposed to them in general. Even on my import!
Joined: Sep 2005
Posts: 6,258
Likes: 6
From: O'Fallon, MO
Car: 1991 Z28 convertible built 3/1/1990
Engine: Cammed 6.0L LSX
Transmission: T56
Axle/Gears: custom Ford 8.8", 4.10 gears
neons started appearing on muscle cars before ricing out cars even became a fad.
i think it might look ok IF you abide by a few rules of thumb. NO bumping flashing lights, NO stock wheels, NO vinyl decals etc
i think it might look ok IF you abide by a few rules of thumb. NO bumping flashing lights, NO stock wheels, NO vinyl decals etc
Member
Joined: Aug 2005
Posts: 123
Likes: 0
From: Winnipeg,Manitoba,Canada
Car: 1985 Firebird
Engine: ***Bagged 2.8***
Transmission: 4 speed auto
Underglow is hard to get even throughout the underside of the car and the wheel wells look "empty" unless you buy the kit for those to but that costs alot of $$$ so it would have the potential to look great if it can be funded to be done right. Personally I put strobes under my car because I could be doing 10mph or a 100mph and my wheels look like there not moving at all and it gets the wow effect and looks amazing...on the second hand I too have green neon tubes in the hatch of my car under the first plateform above my subs just to add the final touch to them....

(Thats an old pic I now have 2 of the Visonik subs)
Kyle

(Thats an old pic I now have 2 of the Visonik subs)
Kyle
I dont know about mixing colors...i would stick with all one color for lights. I dont know though, never seen multiple colored neons in a car in person.
Last edited by Firebat; Jan 4, 2006 at 02:16 AM.
Member
Joined: Dec 2005
Posts: 210
Likes: 0
From: Tacoma, WA
Car: 1987 IROC-Z
Engine: 5.7L V8
Transmission: TH700R4
Axle/Gears: 3.73 Borg Warner
It can actually look very sharp, if done right.
http://www.cmeglow.com/wisconsindells2004.htm
Towards the bottom of the page there is a white Mustang w/blue lights I particularily like.
http://www.cmeglow.com/wisconsindells2004.htm
Towards the bottom of the page there is a white Mustang w/blue lights I particularily like.
Trending Topics
Supreme Member
iTrader: (1)
Joined: Jun 2001
Posts: 3,109
Likes: 25
From: Tacoma, Wa
Car: '91 TA vert
Engine: turboLSx
Transmission: T56
Axle/Gears: 3.23

Oh man that's the funniest thing ever!
As for neons, I like them on some cars. If the color goes well with whatever color paint you have. A nice vibrant color would even look good with white neons. Plus you could use it as awork light.
Supreme Member
iTrader: (25)
Joined: Jul 2004
Posts: 2,623
Likes: 0
From: Beautiful BC
Car: '88 IROC-Z / '91 Z28 / '91 GTA
Engine: LT4 Hot Cam 305 / L98 355 / MR 383
Transmission: 5-spd / 700R4 / 700R4
Axle/Gears: 3:45 / 3:23 / 3:23
do a search on this forum (appearance) there are several threads discussing neon's and a handful of thirdgen members who have neon installed and are showing them off with pics.. myself included.
My first Iroc was a Black 1986 and I had pink on the sides, purple in the front and back and teal above the wheels....it looked really cool because the colors blended well. I did however break so many teal ones I finally decided to take them off....this was in 1992, before ricers had them on everything
Drew
Drew
Member
Joined: Mar 2005
Posts: 139
Likes: 0
From: Bristol Va
Car: 91 Camaro RS...GONE 87 SC (84 Z/28 clone)
Engine: 305 TBI LO3....GONE....305 TPI
Transmission: 700R4 with shift kit
A few years ago i think it woulda looked cool on our cars....
BUT now that theyre on like everything theyve kinda ruined the effect of them..made them kinda tacky
however...i have always wondered what itd look like around the air inlet of a SS or RamAir hood
BUT now that theyre on like everything theyve kinda ruined the effect of them..made them kinda tacky
however...i have always wondered what itd look like around the air inlet of a SS or RamAir hood
Supreme Member
Joined: Apr 2004
Posts: 2,139
Likes: 0
From: MN
Car: 1986 Camaro SC (Supercool)
Engine: one composed of various metals
Originally posted by Catfootball62
A few years ago i think it woulda looked cool on our cars....
BUT now that theyre on like everything theyve kinda ruined the effect of them..made them kinda tacky
however...i have always wondered what itd look like around the air inlet of a SS or RamAir hood
A few years ago i think it woulda looked cool on our cars....
BUT now that theyre on like everything theyve kinda ruined the effect of them..made them kinda tacky
however...i have always wondered what itd look like around the air inlet of a SS or RamAir hood
a member on the board has it done (sorry but I forgot who)
Joined: Apr 2002
Posts: 2,029
Likes: 2
From: Ohio
Car: 88' Iroc-Z
Engine: LQ9
Transmission: T-56
Axle/Gears: 3.42
i was hoping no one had already done that. I've got my RAII hood done with L.E.D.'s and was hoping for a decent debut sometime next year when i get the rest of the car done. That is if all goes well. Either way I like it. I was unsure if i liked it as mine isn't on my car yet. But seeing it at night on another car decided for me for sure.
Supreme Member
Joined: Apr 2004
Posts: 2,139
Likes: 0
From: MN
Car: 1986 Camaro SC (Supercool)
Engine: one composed of various metals
yea I was going to do it to my hood as well when I saw the pic....but then decided against it since my car is never driven at night
Senior Member
iTrader: (1)
Joined: Mar 2004
Posts: 584
Likes: 3
From: Metter, Ga
Car: 1992 Camaro z28
Engine: 350 HSR
Transmission: 700R4
Axle/Gears: 3.42's
Originally posted by iansane

Oh man that's the funniest thing ever!

Oh man that's the funniest thing ever!
........not only that but the way he is doing those wheelies he def need some sub-frame connectors.
Senior Member
iTrader: (1)
Joined: Mar 2004
Posts: 584
Likes: 3
From: Metter, Ga
Car: 1992 Camaro z28
Engine: 350 HSR
Transmission: 700R4
Axle/Gears: 3.42's
Re: How them under glow kits lookin under 3rd generations?
Originally posted by ChinUnit22
I wonna put neons under my Car, i am thinkin to get Blue otside and green inside my trunk space where my speakers at, it will look so cool, Wat u guys think of them neons on a 3rd generation of the F Body, u got it? is it easy to install
I wonna put neons under my Car, i am thinkin to get Blue otside and green inside my trunk space where my speakers at, it will look so cool, Wat u guys think of them neons on a 3rd generation of the F Body, u got it? is it easy to install
1.) Keep it matching inside and out or your gonna look like a circus car.
2.) Try to pick a color that matchs your body color please........nothing looks more cheap than a blue car with red and green neons.
3.) Please make sure there tucked under the car............I see to many ridin around with them hanging down from under the car.
There is this kid around here with a 69 camaro that is candy apple red that his farther bought him for high school and the first thing he did was buy purple neons for the inside and lime green for the outside. Looks like a show car during the day but at night looks like a circus on wheels.
Member
Joined: Dec 2005
Posts: 210
Likes: 0
From: Tacoma, WA
Car: 1987 IROC-Z
Engine: 5.7L V8
Transmission: TH700R4
Axle/Gears: 3.73 Borg Warner
Originally posted by KonArtist
We have went over this time and time again............the big back wheels with the small fronts just don't look good at all.
........not only that but the way he is doing those wheelies he def need some sub-frame connectors.
We have went over this time and time again............the big back wheels with the small fronts just don't look good at all.
........not only that but the way he is doing those wheelies he def need some sub-frame connectors.
Supreme Member
iTrader: (1)
Joined: Jun 2001
Posts: 3,109
Likes: 25
From: Tacoma, Wa
Car: '91 TA vert
Engine: turboLSx
Transmission: T56
Axle/Gears: 3.23
I don't like the hood vents being a different color than the rest or that you can see the tubes.
Other than that, it looks good.
Other than that, it looks good.
Joined: Feb 2003
Posts: 2,498
Likes: 20
From: PNW
Car: 91 Black Formula KR
Engine: 305 TPI R69/G92
Transmission: Astro A5-Pro 5.0-McCleod
Axle/Gears: US Gear 3.42 Eaton True Trac
If I were to get a set, I would prefer led's over neon... check out this site & demo...
http://www.oznium.com/ufo
http://www.oznium.com/ufo
I had blue neons on my old bird before MR State trooper didnt like em anymore
My bird was red with T/A fenders so i put lights in the side vents too.
Blue looked badass on it, especialy when it was idling in a dark lot
Nuttin like a loud car cam loping with a mild glow
My bird was red with T/A fenders so i put lights in the side vents too.
Blue looked badass on it, especialy when it was idling in a dark lot
Nuttin like a loud car cam loping with a mild glow
Joined: Sep 2005
Posts: 6,258
Likes: 6
From: O'Fallon, MO
Car: 1991 Z28 convertible built 3/1/1990
Engine: Cammed 6.0L LSX
Transmission: T56
Axle/Gears: custom Ford 8.8", 4.10 gears
i'm thinking about getting some lighting for my car, BUT i dont want underbody lights, i think it'd be kinda cool to just have a small LED light in each of the holes in the ground effects. so 2 on each side of the car. of coarse they'd be blue and you woudn't see the actual bulbs just the light of them coming from inside the ground effects
anyone else think this would look sawweeet?
anyone else think this would look sawweeet?
Member
Joined: Feb 2005
Posts: 335
Likes: 0
From: Marengo, IL
Car: 2011 Ranger
Engine: 2.3L
Transmission: Stick - Shift like a man!
Originally posted by BlueZee28
i'm thinking about getting some lighting for my car, BUT i dont want underbody lights, i think it'd be kinda cool to just have a small LED light in each of the holes in the ground effects. so 2 on each side of the car. of coarse they'd be blue and you woudn't see the actual bulbs just the light of them coming from inside the ground effects
anyone else think this would look sawweeet?
i'm thinking about getting some lighting for my car, BUT i dont want underbody lights, i think it'd be kinda cool to just have a small LED light in each of the holes in the ground effects. so 2 on each side of the car. of coarse they'd be blue and you woudn't see the actual bulbs just the light of them coming from inside the ground effects
anyone else think this would look sawweeet?
Two LED's per side, on that low of a car, would put like 6-8" circle on the ground below each LED. IMO you'd be better off getting the LED underbody, and tucking it up behind the GFX. Joined: Apr 2002
Posts: 2,029
Likes: 2
From: Ohio
Car: 88' Iroc-Z
Engine: LQ9
Transmission: T-56
Axle/Gears: 3.42
i'm pretty sure he's just talking about the whole's in the 91-92 ground effects. I did it a year or so ago. but i used red since my iroc was black and red. And I got pulled over for it. But it was a ******* cop that had nothing better to do. Cause I went to municipal building and asked them about it. they said as long as it doesnt flash and they can't see the source of the light. I didn't get a ticket from the cop. And I had a cop check it out to see what they thought. And I'm within legal parameters. It looks good bluezee you should do it. I'm very happy with it.
Joined: Sep 2005
Posts: 6,258
Likes: 6
From: O'Fallon, MO
Car: 1991 Z28 convertible built 3/1/1990
Engine: Cammed 6.0L LSX
Transmission: T56
Axle/Gears: custom Ford 8.8", 4.10 gears
Originally posted by 87CIZ
i'm pretty sure he's just talking about the whole's in the 91-92 ground effects. I did it a year or so ago. but i used red since my iroc was black and red. And I got pulled over for it. But it was a ******* cop that had nothing better to do. Cause I went to municipal building and asked them about it. they said as long as it doesnt flash and they can't see the source of the light. I didn't get a ticket from the cop. And I had a cop check it out to see what they thought. And I'm within legal parameters. It looks good bluezee you should do it. I'm very happy with it.
i'm pretty sure he's just talking about the whole's in the 91-92 ground effects. I did it a year or so ago. but i used red since my iroc was black and red. And I got pulled over for it. But it was a ******* cop that had nothing better to do. Cause I went to municipal building and asked them about it. they said as long as it doesnt flash and they can't see the source of the light. I didn't get a ticket from the cop. And I had a cop check it out to see what they thought. And I'm within legal parameters. It looks good bluezee you should do it. I'm very happy with it.
do you by any chance have pictures of yours at night or even at sunset? i wanna see just how bad ace it is. and what kind of product did you buy and how did you wire it up without being able to see the wiring?
Member
Joined: Aug 2005
Posts: 383
Likes: 1
From: fond du lac, WI
Car: 1988 trans am GTA
Engine: 350 tpi
Transmission: 700r4
Originally posted by onesweetta
Pics of my T/A when I had tubes:

Hatch area:
Pics of my T/A when I had tubes:

Hatch area:
Junior Member
Joined: Nov 2005
Posts: 13
Likes: 0
From: Appleton,WI
Car: 1991 T/A
Engine: 305 T.P.I
Transmission: 700R-4 w/shift kit
Originally posted by fitbmxseries1
what kind of lights are in the vents on the hood? i had an idea like that befor but i dint know what type of bulb to use? Led,neon... and so on.
what kind of lights are in the vents on the hood? i had an idea like that befor but i dint know what type of bulb to use? Led,neon... and so on.
i used 6" mini neons from street glows they worked good
Thread
Thread Starter
Forum
Replies
Last Post
IROCZDAVE (88-L98)
Engine/Drivetrain/Suspension Parts for Sale
1
Nov 19, 2015 07:03 AM
IROCZDAVE (88-L98)
Engine/Drivetrain/Suspension Parts for Sale
0
Sep 2, 2015 08:43 AM







