Im getting 17X9.5" TTII's and im pretty sure the bs is 5.5. but my question is is this the correct measurements for the wheel...
5/5 bolt pattern and 5.5 BS?

------------------
1992 RS 3.1L
Rebuilt Tranny W/
Trans-Go Shift Kit
B&M MegaShifter
ES Trans Mount
Dual Snorkel Intake
W/ K&N'S
Flowmaster Exhaust
Accel 8.8mm Wires, Cap/Rotor And Elec. Coil
1 12" - JL W6 (Loud)
Eclipse 2-Channel Amp
Sony Head Unit
Window Tint 20%
'92 Z28 Wheels

Kill's:
80's Stang 4-Cyl, A few Ricers, Ford Tempo(Weak)
'91 OR '92 Z28(Dont Ask Me How) All On A Mesh Up Tranny! 4th Gen 3.4, Cutlas Ciera 3.8

 

No, they're 4.75" / 5-lug. 5.5" backspacing.

 

I cant find any place where they sell that size in the Torq-Thruster II's. I dont believe they make them in that size that i need. Can anyone help me find this Wheel that will fit my 92. This is for my graduation present

------------------
1992 RS 3.1L
Rebuilt Tranny W/
Trans-Go Shift Kit
B&M MegaShifter
ES Trans Mount
Dual Snorkel Intake
W/ K&N'S
Flowmaster Exhaust
Accel 8.8mm Wires, Cap/Rotor And Elec. Coil
1 12" - JL W6 (Loud)
Eclipse 2-Channel Amp
Sony Head Unit
Window Tint 20%
'92 Z28 Wheels

Kill's:
80's Stang 4-Cyl, A few Ricers, Ford Tempo(Weak)
'91 OR '92 Z28(Dont Ask Me How) All On A Mesh Up Tranny! 4th Gen 3.4, Cutlas Ciera 3.8

 

American Racing will make you any backspacing you want. You just need to talk to a distributor.

The wheel you want is a 17x9.5 with a 5-1/2" backspacing and a 5 hole bolt pattern on a 4-3/4" center.

 

Would a 17x8 be a good wheel? And the bs for that is 4?

------------------
1992 RS 3.1L
Rebuilt Tranny W/
Trans-Go Shift Kit
B&M MegaShifter
ES Trans Mount
Dual Snorkel Intake
W/ K&N'S
Flowmaster Exhaust
Accel 8.8mm Wires, Cap/Rotor And Elec. Coil
1 12" - JL W6 (Loud)
Eclipse 2-Channel Amp
Sony Head Unit
Window Tint 20%
'92 Z28 Wheels

Kill's:
80's Stang 4-Cyl, A few Ricers, Ford Tempo(Weak)
'91 OR '92 Z28(Dont Ask Me How) All On A Mesh Up Tranny! 4th Gen 3.4, Cutlas Ciera 3.8