post pics of silver camaros/z06 wheels please
#3
Junior Member
Join Date: Apr 2002
Location: Toronto
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
Car: 88 Iroc
Engine: 350(300hp G.M crate, supercharged)
Transmission: 700R4
Re: post pics of silver camaros/z06 wheels please
Hi Steve, nice pics...I have an 88 with a Paxton myself.....Where abouts in T.O are you?...I am in the North York area
#5
Junior Member
Thread Starter
iTrader: (2)
Join Date: Nov 2007
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
Re: post pics of silver camaros/z06 wheels please
I am speechless, your car is amazing, I was planning on going with those silver Z06 wheels but just got the black Z06 motorsport wheels with the machined lip,m now I'm wishing I hadn't
#7
Junior Member
Thread Starter
iTrader: (2)
Join Date: Nov 2007
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
Re: post pics of silver camaros/z06 wheels please
steve what hood is that? take much prep to get it looking like it is now? (aside from paint obviously)
edit: ok obviously it has received a bit of "massaging" on the rear of the cowl and the screen, but what did it begin life as? before becoming a piece of the 3rd gen built by the gods
edit: ok obviously it has received a bit of "massaging" on the rear of the cowl and the screen, but what did it begin life as? before becoming a piece of the 3rd gen built by the gods
Last edited by imaking; 02-04-2008 at 12:13 AM.
Trending Topics
#8
Junior Member
Join Date: Jul 1999
Location: Toronto, Ontario, Canada
Posts: 55
Likes: 0
Received 14 Likes
on
7 Posts
Re: post pics of silver camaros/z06 wheels please
Thanks for compliments guys !
Actually, I looked at those black Z06 wheels, they are very sharp as well !
The hood is from http://www.usbodysource.com/ but I did modify it extensively as you noted to open up the cowl, built the screen and frame, and removed the body ridge up the entire centre of the hood. Didn't like the look of it, to pronounced for our cars, more in line with the first gen Camaro cowl hood.
Actually, I looked at those black Z06 wheels, they are very sharp as well !
The hood is from http://www.usbodysource.com/ but I did modify it extensively as you noted to open up the cowl, built the screen and frame, and removed the body ridge up the entire centre of the hood. Didn't like the look of it, to pronounced for our cars, more in line with the first gen Camaro cowl hood.
#9
Member
Join Date: May 2006
Location: Lake of the Ozarks, Missouri
Posts: 254
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Pontiac GTA Trans Am
Engine: Basic Stroked SBC..383
Transmission: PerformaBuilt 700R4 3000 Stall
Axle/Gears: Moser 9in. 3:70s
Re: post pics of silver camaros/z06 wheels please
I have a few guestions for Steve Petroff..The cage...looks clean..Very nice. How did you get it to stay down close to the floor so its easy to get in and out of. If you could send me pics or somethin so I can see Id like to do somthing similer. How and where did u get the gas door and to work? That looks great..very nice car by the way and the gauges..I love how they are mounted.
#10
Junior Member
Join Date: Jul 1999
Location: Toronto, Ontario, Canada
Posts: 55
Likes: 0
Received 14 Likes
on
7 Posts
Re: post pics of silver camaros/z06 wheels please
The cage was custom bent to my specifications by Bear Performance in Windsor Canada. Simply welded the side bars lower than normal to aid in getting in and out. The gas door is a Mustang Bullitt unit that I modified to fit the curvature of our quarter panels. There are more pics in either of the two links above.
Thread
Thread Starter
Forum
Replies
Last Post
1992 Trans Am
History / Originality
27
05-10-2023 07:19 PM
Fronzizzle
Suspension and Chassis
6
03-18-2019 08:29 PM