Damn your car is sexy!!!! I just drooled on my keyboard!lol

 

Here is a FAQ guide Skulte provides. http://www.skulte.com/adapterfaq.html I'm assuming you want to run true ZR1 (17x9.5 front 17x11 rear) as SLP makes a ZR1 that is 17x8 all around and bolts right on. For mine, the front spacers are 1.12" and the rears are 2". The front springs have a 1" drop while the rear are stock due to clearance issues with the wide tires. I actually had to fabricate a 1" square x 2" long steel spacers for the rear axle bumpers because hard impact put the rear tires hitting the fender lip. No issues otherwise.

Also, thanks bsporty! Thats my reaction too.

 

My buddy runs 315/35/17's on his 84 Z with no issue's with the rear tires. I think he rolled his fender though. I've ran the same combo on my old '95 Z and had to cut the bump stops completely off, car never bottomed out. I hate the fact I have to run spacers but what am I going to do.

 

BADASS!!!!! That hood is rockin

 

Yea, just rolling the fender should be alright. I didn't put bumper spacers on for over a year, but roads around here aren't the greatest.

 

Thanks, I love it...not bad lookin' for a 150k mile ride with 18 year old paint (was hailed on in '92 and had to be fixed the oldskool way before PDR was around, )

You've got one clean *** ride, how much you got into paint and body? Who makes that hood, that's the best cowl hood for a third gen I've seen...never understood why they don't all follow the natural lines of the hood, and the gentle slope of the cowl sides is nice and flows well with the body.

Not sure if you're talking to me or Blew but either way I'll just pretend you're talking to me and say thanks.

 

[IMG][/IMG]

 

Certainly not, paint looks great. Sorry about the hail, long hoods take a beating. I would have to do some serious back calculating to figure how much I have in paint and body. This was my first car and parts have been painted bit by bit as needed (I've never had the doors or fenders painted though.. I have a great paint and body man who matched the hood and installed the Z spoiler (started life as an RS). The hood was sold as a Jongbloed Hood but now is more commonly known as a Sunoco Hood. Hawks sells them: http://www.hawksthirdgenparts.com/ca...stylehood.aspx and sometimes they have them for less on ebay listings. And yea, I think he was paying you the compliment!

Watson: Fine looking IROC, always a soft spot for the '90 IROCs! Nice to see more blue representation too. Great look with the Cragers. I almost missed it, but how did you get the cat to pose in the pic?

 

heres mine

 

haha it was a tricky shot but we ended up getting it lol And im actually not sure what brand wheels those are there 17s but i've been deployed so i havent seen the car in like 8 months so im looking forward to driving it again next week

 

Awesome, always good to be reunited and thank you for your service!

 

Here is a pic from the biggest annual show!

 

Here you go

 

lordmetalz28 thats a clean looking Iroc you have i wanna get my hands on one of those turbo daytona hoods like you have i think they look pretty sick and much better than a cowl

 

 

Thanks, I completely missed that you had asked about my headlights--they are Sylvania Silverstars, how could you tell they were not stock? They have stock housings lol.

 

Ha! Thats funny. I've been on the hunt for headlight conversion or replacement so I've been paying attention to others headlights. I was leaning heavily toward the Silverstars ( I put some on our Cherokee) and really liked the difference both in look and brightness. Didn't know yours were SS but thought they had a nice clear look without the awkwardness of projectors.

 

 

 

Yeah I'd love a set of REAL HIDs but I'm not willing to put in aftermarket housings...doesn't look right. I really wish I could get real HIDs and keep the stock look. SS will have to do though.

 

not sure if i uploaded right

 

Awesome Wallpapers

 

Does anyone have any nice 1920 x 1080 pics?

 

Wow,...Nice ride

 

Whos got a nice ride?

 

I have the ones I posted in larger sizes if you want any.

 

Here's my 1990 IROC, paint-job is about 1 year old and the car is obviously garage kept. Hope you like!

 

i was wondering if you get called out on this hood alot? i was thinking about getting the same along with the ram air box, do you have that setup?

 

Hey ram air'd gta the fitment of that hood seems perfect wish my fit like that, where di you get it from? and is it fiberglass, metal or urethane? mine is urethane but its curved up on the sides and i hate it. i had to get hood pins

 

21092010262.jpg?t=1294778698


R0012508.jpg?t=1294778787

 

not perfect but here ya go.

 

 

this was a quick shot taken with my phone. Its actually good quality considering this is my wallpaper now also edited a little bit to make the green of the trees pop out a little bit

 

 

 

 

Heres some of mine, doesnt look to bad I think.

 

Good looking cars, and hit the enter key before each pic, it helps distingushing, between them and make each picture look better

 

NICE!!!

 

 

 

 

 

It was a fiberglass fully functional hood from Hawks Third Gen Parts with the air box. It fit pretty good but the guy who painted it had to do some filling in because there was a few low spots in it.
I got rid of this car a few years ago already and man do I kick myself every summer for letting this thing go. I really miss cruisin' around and takin it to shows. I actually came on this site tonight cuz I think its about time to find another ride that I can beautify again.....and this time hang on to.

 

nice

 

 

hard to compare to some of these beautiful cars...

camaroparkinglot.jpg?t=1311496560

camaros.jpg?t=1311496610



camarowarped.jpg?t=1311496748

 

Took this one for the Pontiac Lovers like me

 

Few more emblems