I didn't want to post all the pics I have because they are large. But here are all 13 pictures with the new wheels.<a href="http://86iroc0.tripod.com/">http://86iroc0.tripod.com</a>
tell me what you think, they are 17x9's satin finish.
Bryan

Admin edit: correct URL entered

[This message has been edited by Dirk (edited September 16, 2001).]

 

Sorry here is the link something messed up, tell me what you think of them. http://bjsblueroc.tripod.com/



[This message has been edited by BryanJ (edited September 12, 2001).]

 

Looks good!!!!!!!!!

Hey is that a real IROC? I notice the 91-92 spoiler, the IROC-Z at the back of the door yet a z28 badge on the bumper. Just curious. Your car looks sweet!

------------------
1988 Jet Black IROC
5.7L W/ 64000 miles
Flowmaster Exhaust
Fully Loaded
------------------

My IROC

 

Looks good.

------------------
91 Z28
Best Time Slip:
60' - 2.098
1/8 - 9.137 , MPH - 76.21
1/4 - 14.213, MPH - 97.55
Performace Mods: B&B Exhaust, few free mods.
Appearance Mods: SS wheels, 2.5" Cowl Hood... New 100% Black paint job, Clear Side Marker Lights
Stereo: Alpine 855, Infinity Kappas all around, Infinity 150x2 amp (POS), Infinity Perfect 10 in hatch.
Pictures are Here
ICQ: 1437212
AOL: normalmatt9

 

Yea it is an 86 Iroc it came with the 305 tpi. Most people don't even notice that but when I got it repainted I told him to put the IROC at the back of the door, and we also had him put on the spoiler I had bought at superchevy. Do you think I should go and put the stripe that goes above the ground effects back.
Thanks for the comments,
Bryan

 

Looks nice. What size tires you got on there?

 

they are 275/40/17 the wheels are 17x9 in satin finish

 

link wont work for me.

------------------
Brandon
"ScreaminDeamin 360"
350 60 over, TRW forged 9.83:1 pistons,Hooker Comp headers, crane cam 216/228 .484/.512, crane 1.6 RR's, ported plenum, home made ram air, 24lb SVO injectors, crane AFPR, all going through 3 inch mandrel pipe and a flowmaster.
New project-89 IROC-305 5spd...Jamex Springs...and thats just about it!Soon- 6 speed, Pro 5.0 shifter and 4.10's
http://users.argolink.net/bvana

http://ScreaminDeamin.cz28.com

 

something is wrong with the site I made a new one..
http://86iroc0.tripod.com/

[This message has been edited by BryanJ (edited September 13, 2001).]

 

looks good. i would definatly consider putting some lowering springs on it tho. i should some pics of my car with the new rims/paintjob sometime b4 the weekend.

------------------
Brandon
"ScreaminDeamin 360"
350 60 over, TRW forged 9.83:1 pistons,Hooker Comp headers, crane cam 216/228 .484/.512, crane 1.6 RR's, ported plenum, home made ram air, 24lb SVO injectors, crane AFPR, all going through 3 inch mandrel pipe and a flowmaster.
New project-89 IROC-305 5spd...Jamex Springs...and thats just about it!Soon- 6 speed, Pro 5.0 shifter and 4.10's
http://users.argolink.net/bvana

http://ScreaminDeamin.cz28.com

 

Don't put the stripes back on, please dont!

as for lowering springs, you can't just put them and think it will actually work...you gotta look through the suspension board and see what else there is too it, lowering the car messes up the suspension geometry unless it is done right.

 

nice wheels ... i was wondering how much it costs for 4 tires and rims. by the way if you put in lowering springs you have to basicallly replace the back half of the suspension to get any good traction out of it. trust me i learned from bitter expierence

------------------
91 camaro RS
- 305 TBI
Mods: Performer TBI intake, 1" TBI spacer, K+N, jet fan switch ,160 thermo,Accel control module, Jet Stage 2 chip, edelbrock TES headers, Compleate 3" Flowmaster exhaust, Edelbrock springs, KYB struts and shocks, 700R4 built by TSI, SLP tq converter, b+m trans cooler, white guage faces, megashifter..
next month: spohn LCA's and panhard rod, BMR relocation brackets, 323 gear, lt1 cam , 350 heads

 

Screamindeamin85z,
that was my next plan to drop the car.. What is the best drop kit? Post some pics when you are done I would like to see them.
bbtaz97 it was 1500 for wheels and tires w/ kumho tires

 

I can't see anything? The link up is bad!

------------------
-------1992 Z28------
**NEW EVOLUTION RACING**

http://ourworld.cs.com/ryanflowe/myhomepage/auto.html

<A HREF="http://ourworld.cs.com/ryanflowe/myhomepage/favorite.html" TARGET=_blank>
http://ourworld.cs.com/ryanflowe/myhomepage/favorite.html</A>

 

here are a few of the pics of the new paint. keep in mind here that my scanner SUX!! so the color balance is all messed up, on Mon i will use the bada$$ flatbed scanner we have in the imaging dept.







------------------
Brandon
"ScreaminDeamin 360"
350 60 over, TRW forged 9.83:1 pistons,Hooker Comp headers, crane cam 216/228 .484/.512, crane 1.6 RR's, ported plenum, home made ram air, 24lb SVO injectors, crane AFPR, all going through 3 inch mandrel pipe and a flowmaster.
New project-89 IROC-305 5spd...Jamex Springs...and thats just about it!Soon- 6 speed, Pro 5.0 shifter and 4.10's
http://users.argolink.net/bvana

http://ScreaminDeamin.cz28.com

 

you're pics didn't show

 

hmmm why does this always happen to me? i know they are there because i loaded them and had a few friends look at them. well heres a link to the DIR.
http://screamindeamin.cz28.com/images/new

Brandon
"ScreaminDeamin 360"
350 60 over, TRW forged 9.83:1 pistons,Hooker Comp headers, crane cam 216/228 .484/.512, crane 1.6 RR's, ported plenum, home made ram air, 24lb SVO injectors, crane AFPR, all going through 3 inch mandrel pipe and a flowmaster.
New project-89 IROC-305 5spd...Jamex Springs...and thats just about it!Soon- 6 speed, Pro 5.0 shifter and 4.10's
http://users.argolink.net/bvana

http://ScreaminDeamin.cz28.com



[This message has been edited by ScreaminDeamin85Z (edited September 16, 2001).]

 

Looks great man!


Mike

------------------
Check out My Car Pics http://albums.photo.epson.com/j/Albu...667&a=13599419

Gran Turismo Americano "The Ultimate Firebird"
Smokin 1989 GTA- Bone stock except for exhaust. (no catalytic-stainless pipe into Flowmaster 2 chamber) & AC Delco Rapid Fire Plugs

 

i dont like those rims...or the big *** hood either.....otherwise its fairly decent....

------------------
1991 RS LO3

some of my favorite quotes:

I do not blame stupid people for being stupid, what i do blame them for is for not asking smart people for advice. When ever my mom asks for help, i tell her, i'm the one who knows what he's doing, not you, don't question me, just do what i tell you to. if stupid people would just realize they were stupid, and consult a smart person for advice, before they went and did something stupid and got pregnant/got someone pregant, this ****hole of a world would be a lot better. - adam corola

Honda makes great performance cars - any scarcastic comedian

 

hmmm...oh ya i forgot i wanted to be like everyone else and their brother right?? why look like everyone else out there? i am trying to put myself aside from the rest of the world..and if no one out there likes it then oh well...life goes on.


thanks Mike! i have spent coutless hours and money trying to get this car back like the 85 was b4 it was wrecked.
------------------
Brandon
"ScreaminDeamin 360"
350 60 over, TRW forged 9.83:1 pistons,Hooker Comp headers, crane cam 216/228 .484/.512, crane 1.6 RR's, ported plenum, home made ram air, 24lb SVO injectors, crane AFPR, all going through 3 inch mandrel pipe and a flowmaster.
New project-89 IROC-305 5spd...Jamex Springs...and thats just about it!Soon- 6 speed, Pro 5.0 shifter and 4.10's
http://users.argolink.net/bvana

http://ScreaminDeamin.cz28.com

[This message has been edited by ScreaminDeamin85Z (edited September 16, 2001).]

 

ScreaminDeamin85Z,
I on the other hand think that the car looks great. I have always favored black, its a mean looking car.
Bryan

 

thanks Bryan i put alot of work into. to answer your earlier question, i have Jamex 1.5 lowering springs and the car drives great. i dont scrape the front GFX except in those cases where you just cant avoid it.

------------------
Brandon
"ScreaminDeamin 360"
350 60 over, TRW forged 9.83:1 pistons,Hooker Comp headers, crane cam 216/228 .484/.512, crane 1.6 RR's, ported plenum, home made ram air, 24lb SVO injectors, crane AFPR, all going through 3 inch mandrel pipe and a flowmaster.
New project-89 IROC-305 5spd...Jamex Springs...and thats just about it!Soon- 6 speed, Pro 5.0 shifter and 4.10's
http://users.argolink.net/bvana

http://ScreaminDeamin.cz28.com

[This message has been edited by ScreaminDeamin85Z (edited September 17, 2001).]