Nicest Car On The Board
Member
Joined: Jun 2010
Posts: 264
Likes: 0
From: Nc
Car: 91 camaro rs
Engine: 305 (350 vortec in dec.)
Transmission: Wc-T5
Axle/Gears: 3.08 (3.42 in dec.)
Re: Nicest Car On The Board
Well hats off!! I'm not a bird fan, I've owned 8 camaros from 83-95, and your bird has to be the best looking bird I have seen.
Member
iTrader: (1)
Joined: Jul 2005
Posts: 141
Likes: 0
From: Lowell, MI
Car: 1989 Camaro IROC-Z Convt.
Engine: 355
Transmission: T5
Axle/Gears: Zexel Torsen 3.42
Re: Nicest Car On The Board

Wish I had money for the Baer brake kit or c6 or cts-v setup. I got LS1 calipers with my car when I bought it, along with a ton of other parts, so I have about $150 into my LS1 front and LT1 rear conversion

Edit: They aren't in my sig picture, car is torn apart currently. I also have a Sunoco/Joblong hood on it
Last edited by hoogiesngrinder; Nov 8, 2011 at 03:32 PM.
Member
Joined: Jun 2010
Posts: 264
Likes: 0
From: Nc
Car: 91 camaro rs
Engine: 305 (350 vortec in dec.)
Transmission: Wc-T5
Axle/Gears: 3.08 (3.42 in dec.)
Re: Nicest Car On The Board

Wish I had money for the Baer brake kit or c6 or cts-v setup. I got LS1 calipers with my car when I bought it, along with a ton of other parts, so I have about $150 into my LS1 front and LT1 rear conversion

Edit: They aren't in my sig picture, car is torn apart currently. I also have a Sunoco/Joblong hood on it

Supreme Member
iTrader: (3)
Joined: Jul 2011
Posts: 1,826
Likes: 0
From: Katy TEXAS (West Houston)
Car: 1992 Camaro RS
Engine: 5.0 TBI L03 V8
Transmission: Rebuilt 700R4 W/ Corvette shift kit
Axle/Gears: 2:73 open
Supreme Member
iTrader: (3)
Joined: Jul 2011
Posts: 1,826
Likes: 0
From: Katy TEXAS (West Houston)
Car: 1992 Camaro RS
Engine: 5.0 TBI L03 V8
Transmission: Rebuilt 700R4 W/ Corvette shift kit
Axle/Gears: 2:73 open
Re: Nicest Car On The Board
That last Camaro posted by L69 is REALLY nice. Who's is that?
COTM Editor
iTrader: (11)
Joined: Mar 2006
Posts: 4,098
Likes: 14
From: WINDSOR, CO
Car: 91 Z28, 87 SC, 90 IROC, 92 RS
Engine: LS1, 305 TPI, L98, NADA
Transmission: T56, 700r4's, and NADA
Axle/Gears: 3.89, 3.42, 3.23, NADA
Senior Member
iTrader: (2)
Joined: Jul 2002
Posts: 784
Likes: 1
From: Philly, PA
Car: 1986 Camaro SC
Engine: None
Transmission: None
Axle/Gears: Moser 9" W/ spool 3.50 gears
Re: Nicest Car On The Board
Radialtireking is up there. There is also a Yellow 91/92 car with hockey stripes that appears onve in a while.
I have some serious favorates saved on my PC but I don't know if there members here or what there screen names would be.
I have some serious favorates saved on my PC but I don't know if there members here or what there screen names would be.
Re: Nicest Car On The Board
It's Ramair21.
Here's a thread about the headlight conversion he did:
https://www.thirdgen.org/forums/auto...onversion.html
Member
iTrader: (5)
Joined: Apr 2004
Posts: 400
Likes: 0
From: Va beach
Car: 87 IROC,
Engine: 370 LSx With Boost
Transmission: 4L80E
Axle/Gears: S-60 with 3.50s
Supreme Member




Joined: Aug 2007
Posts: 2,188
Likes: 51
From: Dallas
Car: 1991 Trans Am Vert
Engine: 5.0 TPI
Transmission: T-5 baby
COTM Editor
iTrader: (11)
Joined: Mar 2006
Posts: 4,098
Likes: 14
From: WINDSOR, CO
Car: 91 Z28, 87 SC, 90 IROC, 92 RS
Engine: LS1, 305 TPI, L98, NADA
Transmission: T56, 700r4's, and NADA
Axle/Gears: 3.89, 3.42, 3.23, NADA
COTM Editor
iTrader: (11)
Joined: Mar 2006
Posts: 4,098
Likes: 14
From: WINDSOR, CO
Car: 91 Z28, 87 SC, 90 IROC, 92 RS
Engine: LS1, 305 TPI, L98, NADA
Transmission: T56, 700r4's, and NADA
Axle/Gears: 3.89, 3.42, 3.23, NADA
Member
iTrader: (1)
Joined: Jul 2005
Posts: 141
Likes: 0
From: Lowell, MI
Car: 1989 Camaro IROC-Z Convt.
Engine: 355
Transmission: T5
Axle/Gears: Zexel Torsen 3.42
Re: Nicest Car On The Board
e36 BMW lights if I remember right. Search, there is a thread all about them.
Joined: Mar 2009
Posts: 2,036
Likes: 28
From: Florida
Car: 1989 Camaro RS
Engine: LH6
Transmission: T56
Axle/Gears: 3.42 Auburn Posi
Re: Nicest Car On The Board
I wish my Camaro looked good enough to be in this group. But I love Spike and 841LE's cars. I'd buy 84's any day of the week.
Senior Member

Joined: Jan 2008
Posts: 564
Likes: 11
From: Albuquerque NM
Car: 1985 Camaro Z28
Engine: 5.7 LSX
Transmission: Performabuilt 4L60E
Axle/Gears: Strange 12-bolt 3.73
Re: Nicest Car On The Board
I think Sickness91Z28, Spike-Z and Camarosource (the blue and white one) are by far the best looking camaros I have seen ANYWHERE!
The Rad Rods by Troy Camaro is looking pretty sick as well! Lets hope it stays as sick with the paint job when its all done. I say black would be awesome!
The Rad Rods by Troy Camaro is looking pretty sick as well! Lets hope it stays as sick with the paint job when its all done. I say black would be awesome!
Member
iTrader: (5)
Joined: Apr 2004
Posts: 400
Likes: 0
From: Va beach
Car: 87 IROC,
Engine: 370 LSx With Boost
Transmission: 4L80E
Axle/Gears: S-60 with 3.50s
Re: Nicest Car On The Board
95% done...New pics soon when 100%
[IMG]http://a2.sphotos.ak.fbcdn.net/hphotos-ak-ash4/391731_10150358506396333_501806332_8734359_1499049792_n.jpg[/IG]
[IMG]http://a8.sphotos.ak.fbcdn.net/hphotos-ak-ash4/314614_10150358507141333_501806332_8734364_319045412_n.jpg[/IG]
[IMG]http://a2.sphotos.ak.fbcdn.net/hphotos-ak-ash4/313604_10150358507531333_501806332_8734365_2010103239_n.jpg[/IG]
[IMG]http://a2.sphotos.ak.fbcdn.net/hphotos-ak-ash4/391731_10150358506396333_501806332_8734359_1499049792_n.jpg[/IG]
[IMG]http://a8.sphotos.ak.fbcdn.net/hphotos-ak-ash4/314614_10150358507141333_501806332_8734364_319045412_n.jpg[/IG]
[IMG]http://a2.sphotos.ak.fbcdn.net/hphotos-ak-ash4/313604_10150358507531333_501806332_8734365_2010103239_n.jpg[/IG]
How did I forget about your car???
COTM Editor
iTrader: (11)
Joined: Mar 2006
Posts: 4,098
Likes: 14
From: WINDSOR, CO
Car: 91 Z28, 87 SC, 90 IROC, 92 RS
Engine: LS1, 305 TPI, L98, NADA
Transmission: T56, 700r4's, and NADA
Axle/Gears: 3.89, 3.42, 3.23, NADA
Supreme Member
iTrader: (3)
Joined: Jul 2011
Posts: 1,826
Likes: 0
From: Katy TEXAS (West Houston)
Car: 1992 Camaro RS
Engine: 5.0 TBI L03 V8
Transmission: Rebuilt 700R4 W/ Corvette shift kit
Axle/Gears: 2:73 open
Re: Nicest Car On The Board
yah. Those are some nice tires too. I'm guessing something like 285/35-18s in the rear.
Joined: Dec 2000
Posts: 1,954
Likes: 68
From: NC
Car: 1987 Iroc
Engine: 357 Single plane and a Ysi vortech
Transmission: T56
Axle/Gears: 3.50 9"
Re: Nicest Car On The Board
Thanks guys!
Yes the splitter and carbon fiber side skirts will hopefully go on this coming week, as soon as I get it back from the dyno. The rear diffuser is already on!
275 front/295 rear
Yes the splitter and carbon fiber side skirts will hopefully go on this coming week, as soon as I get it back from the dyno. The rear diffuser is already on!
275 front/295 rear
Supreme Member
iTrader: (3)
Joined: Jul 2011
Posts: 1,826
Likes: 0
From: Katy TEXAS (West Houston)
Car: 1992 Camaro RS
Engine: 5.0 TBI L03 V8
Transmission: Rebuilt 700R4 W/ Corvette shift kit
Axle/Gears: 2:73 open
Re: Nicest Car On The Board
Hay, I was exactly average.
Senior Member
Joined: Sep 2000
Posts: 885
Likes: 1
From: Annapolis, Maryland
Car: 1985 Camaro
Engine: 565 BBC
Transmission: Glide
Axle/Gears: 9 inch/spool/3.70
Re: Nicest Car On The Board
Oh what the hell here is mine. Some really nice looking cars on here guys glad to see so many.
Senior Member

Joined: Jan 2008
Posts: 564
Likes: 11
From: Albuquerque NM
Car: 1985 Camaro Z28
Engine: 5.7 LSX
Transmission: Performabuilt 4L60E
Axle/Gears: Strange 12-bolt 3.73
Re: Nicest Car On The Board
BlueBeast, Your car is frikkin' Gorgeous!!!!
Saw a few others that were mentioned that I didnt but there are several nice ones here!
P.S. Mine will definately make this list..... one day.....
Senior Member
iTrader: (3)
Joined: Jan 2010
Posts: 527
Likes: 1
From: Illinois
Car: 89 GTA
Engine: 5.7 TPI L98
Transmission: 700R4 w/ Stage 2 shift kit & stall
Re: Nicest Car On The Board
Alot of you guys have definatley outdone me, but I feel the need to share mine anyways.




Supreme Member
iTrader: (3)
Joined: Jul 2011
Posts: 1,826
Likes: 0
From: Katy TEXAS (West Houston)
Car: 1992 Camaro RS
Engine: 5.0 TBI L03 V8
Transmission: Rebuilt 700R4 W/ Corvette shift kit
Axle/Gears: 2:73 open
Joined: Oct 2001
Posts: 12,232
Likes: 1,166
From: Il
Car: 1989-92 FORMULA350 305 92 Hawkclone
Engine: 4++,350 & 305 CIs
Transmission: 700R4 4800 vig 18th700R4 t56 ZF6 T5
Axle/Gears: 3.70 9"ford alum chunk,dana44,9bolt
COTM Editor
iTrader: (11)
Joined: Mar 2006
Posts: 4,098
Likes: 14
From: WINDSOR, CO
Car: 91 Z28, 87 SC, 90 IROC, 92 RS
Engine: LS1, 305 TPI, L98, NADA
Transmission: T56, 700r4's, and NADA
Axle/Gears: 3.89, 3.42, 3.23, NADA
Member
iTrader: (5)
Joined: Apr 2004
Posts: 400
Likes: 0
From: Va beach
Car: 87 IROC,
Engine: 370 LSx With Boost
Transmission: 4L80E
Axle/Gears: S-60 with 3.50s
Joined: Oct 2001
Posts: 12,232
Likes: 1,166
From: Il
Car: 1989-92 FORMULA350 305 92 Hawkclone
Engine: 4++,350 & 305 CIs
Transmission: 700R4 4800 vig 18th700R4 t56 ZF6 T5
Axle/Gears: 3.70 9"ford alum chunk,dana44,9bolt
Re: Nicest Car On The Board
It looks like you could make a wood block that matchs the curve of the inner fender and smack it back out..
Member
Joined: Jun 2010
Posts: 264
Likes: 0
From: Nc
Car: 91 camaro rs
Engine: 305 (350 vortec in dec.)
Transmission: Wc-T5
Axle/Gears: 3.08 (3.42 in dec.)
Joined: Dec 2000
Posts: 1,954
Likes: 68
From: NC
Car: 1987 Iroc
Engine: 357 Single plane and a Ysi vortech
Transmission: T56
Axle/Gears: 3.50 9"
Re: Nicest Car On The Board
BMR Tubular K-Member
BMR Tubular Lower Control Arms
Eibach Sportline spring kit
KYB Adjustable front Struts and rear shocks
Energy Suspension urethane bushing kit – full car
Hotchkis front strut brace
Hotchkis front and rear sway bars
Hotchkis tie rod connectors
Hotchkis sub frame connectors
Hotchkis adjustable pan rod bar
Hotchkis trailing arms
Spohn Performance caster/camber plates
Edlebrock adjustable torque arm
Competition Engineering 12-point roll cage
Manual S-10 gearbox swap
Exhaust
Hooker Long tubes
Custom H-pipe
3 "true duals
Flowmaster dual chamber 40 series with turn downs
Supreme Member
iTrader: (1)
Joined: Jan 2000
Posts: 1,110
Likes: 6
From: san jose, ca
Car: 1990 IROC-Z (De-Badged-Carbon Hood)
Engine: Superram 383
Transmission: T-56 w/upgraded Viper Internals
Axle/Gears: 3.73 18x8 and 18x11 irocs
Joined: Dec 2005
Posts: 6,499
Likes: 31
From: Macon, GA
Car: 1992 Camaro RS
Engine: Vortec headed 355, xe262
Transmission: T56
Axle/Gears: 9-bolt 3.70
Re: Nicest Car On The Board
I liked the old front splitter a lot better than the new gfx curtain. The new one is probably a lot more functional, but the car looks worse with it on. I'd save that stuff for track use and daily drive it as pictured. Regardless, it's definitely deserving of a mention in this thread.
Joined: Dec 2000
Posts: 1,954
Likes: 68
From: NC
Car: 1987 Iroc
Engine: 357 Single plane and a Ysi vortech
Transmission: T56
Axle/Gears: 3.50 9"
Re: Nicest Car On The Board
The setup is exactly the same. You just can't see the rear diffuser in the pictures. The front GFX is also the same. The splitter just hasn't been installed yet. That will be done ASAP as well. It's currently at the dyno.
Side carbon fiber pieces will also be installed when I get it on the lift.
What do you mean by new GFX curtain?
Side carbon fiber pieces will also be installed when I get it on the lift.
What do you mean by new GFX curtain?
Joined: Dec 2005
Posts: 6,499
Likes: 31
From: Macon, GA
Car: 1992 Camaro RS
Engine: Vortec headed 355, xe262
Transmission: T56
Axle/Gears: 9-bolt 3.70
Re: Nicest Car On The Board
THe curtain is what I refer to as what's in your current avatar pic. It definitely looks effective and functional, but I just think this one looks a little better... Im pretty sure this is your car, right?

Just saying I'd save the curtain for the track, I see a lot of the track cars using very similar setups.

Just saying I'd save the curtain for the track, I see a lot of the track cars using very similar setups.
Last edited by InfernalVortex; Nov 23, 2011 at 07:36 PM.
















It wont be needed anymore so when i get a chance got to try and patch all that back in. FML 