What were all of the stock appearance options on thirdgen camaros? such as IROC's hoods had louvres...etc

------------------
*1989 RS
*Red, Daytona Turbo fiberglass hood, chrome 16x8 IROC wheels
*355 CID
*TPI ported plenum, SLP siamesed runners, Edelbrock high flow intake
*SLP 1 and 3/4 headers with 3 inch catback
*Richmond 3.73, Auburn Posi
*Modded 700-R4, 2800 stall converter
*eibach pro kit and hotchkis sturt tower brace

"There is no way you have a 350 in that car. They are made to have 305's and a 350 wouldnt fit"
-local parts store genius-

 

good question

 

Thats a really good question.

 

The reason i was asking is because i was thinking of changing the APPEARANCE of the exterior of my car. But i dont like the aftermarket for our cars at all when it comes to looks

------------------
*1989 RS
*Red, Daytona Turbo fiberglass hood, chrome 16x8 IROC wheels
*355 CID
*TPI ported plenum, SLP siamesed runners, Edelbrock high flow intake
*SLP 1 and 3/4 headers with 3 inch catback
*Richmond 3.73, Auburn Posi
*Modded 700-R4, 2800 stall converter
*eibach pro kit and hotchkis sturt tower brace

"There is no way you have a 350 in that car. They are made to have 305's and a 350 wouldnt fit"
-local parts store genius-

 

Too bad you don't own a firebird....I am not a camaro guy, so I don't even know the difference between a berlinetta, Iroc and RS (appearance wise), but someone should defintitely take the time to do what I did for my fellow Trans Am/firebird owners.



IF someone else would do the researh and compile/collect the pictures of all thirdgen camaro models (i.e. RS, Iroc, Z28), with a description grouping them by year, I can put it all together like I did with the firebird.

[This message has been edited by Nightcruzer (edited November 14, 2001).]