I on't know if this is the right forum for this ad, but i was wondering what people are selling camaro's for with-out motors? I have a 89Rs that someone converted to a iroc. I pulled the motor and tranny out and the dash cluster. I am wanting to sell it cheap.. t-top car and they don't leak. I am trying to figure out a fair price. Can you guys help me out? here are 2 pics of it. by the way, the fiberglass hood isn't going either.

 

here is pic #2

 

Is that a side pipe there? I would start a 3Gs and go from there. Hey someone will pay it.

 

$200+/- is a fair asking price. IMO

 

I would start at $1000.

 

I say $500 Max with out motor

 

That is a side pipe, we won't talk about that. 3in side pipes are a bad idea. I won't ever try that again!! I was thinking in the $700-$900 range for the price. i just wanted to get a ballpark on what you guys thought. I couldn't sell it for 3g's and sleep at night.

 

Find one of those rich people that spend 3 grand on a one peice of clothing at Neiman Marcus. These are the people that you want to look for. "the dumb rich folk" hehe

>well 3gs that does sound kinda high maybe 2gs

 

redbird_400, yeah there's plenty of those kind of people around. People do some ridiculous things. I just need to sel the car quickly to make room for my other cars. In my driveway i have 2 89 camaros, 69 chevelle, 98 lumina, 94 toyota corolla, and a 01 grand prix. It's really crowded!!

 

sell the lumina for a engine


>aww no side pipe story?

 

lumina for an engine..hehe ought to. I am putting the 327 into my other 89 and am building a 434 smallblock for the chevelle. I just got the block done about 1week ago and ordered the roating assembly yesterday.


I should post some pictures of the sidepipes after i took them off the car. My welds held up, but the rest of the pipe didn't do too good. there were a couple holes, some crushed areas, some pieces of pipe torn off. it was ugly. I thought they kept getting louder by the way there was no mufflers either. just straight 3in out.

 

Thats has to be loud! Hey do you have a pic of the Chevelle? I'm looking at a model of a 73 here on my desk at work. Its even got spark plug wires

 

here is a picture of the 69. It is pretty rough. It needs quarters, and rear window cowl trim replaced. I am debating on buying a fiberglass one piece front end for it.

 

Well its a start. Good project to work on. Do you have a front shot?

 

No, i don't have any shots of the front yet. It's at my friend's house right now. I was out "testing" the motor that was in it, when it decided to junk a u-joint. I am building a motor for it, so i went out and had some fun burning the tires off!

 

i paid 2000 for mine....the car had no tarnny, drive shaft, or motor...well in it...it had the stuff. but the engine didnt have heads so i just bought a rebuilt 327 and got rid of the other blockpretty good deal if u ask me...the body has almost no rust at all..a very small amount on the under carriage. the 4" harwood (i believe) hood, the tranny, driveshaft, rims, tires, rear winginerior is a little rough.but still

here's a pic

 

Thats the way to go. This way you get to pick your own motor. Oh yeah I paid 900 for my bird with a engine. The engine was shot. Me my dad and my Bro did everything we could to get it running but it would only run for 3 seconds the die. Then I wouldn't even do anything except turn over with the starter. Well a while down the road I found a wrecked Camaro for sale for about $500.00. The engine was good so we swaped them. Yeah It took me about 2 Grand to get my ride on the road. And thats just the Begining!

 

Yup, I got my bird for 500 bucks with a blown motor. I'd say you could get 1000 for your camaro. Thats the way to go, build it how you like it.

 

thanks again for the input guys. I posted it in the classifieds for $750

 

If thats all you want... Well If you had the time I would go for a higher price.

 

well, i guess that was a pretty fair price. I sold it today. The only reason i sold it so cheap was because i had to get it out of the driveway.

 

I paid $200 for my camaro with a blown motor. Biggest mistake redoing a 6 cylinder, but if i had any more power learning to drive, id be dead. I paid $250 for my trans am, as the guy wanted it off his lawn and it didnt run. A $30 timing chain and 3 hours fixed that problem. But then again, me and my father redid the body and that was a lot of hours of labor, but well worth it.

 

yeah, i've always wanted a 68-72 chevelle. Oh well I have a 68 gto (possibly another soon) and a 72 LeMans...

 

I've still got my 89RS still, so i'm happy. 68 gto is a sweet car. Lots in similar to the chevelle.....hey do you really need the steering column out of the gto??? j/k i'm looking for one.

 

I have one from a 68 tempest that we used for a parts car. Its column shifter though... Yeah. I'm a pontiac nut...

 

Cam89RS you've got mail