Tell me about your gauge cluster!
#52
Supreme Member
iTrader: (16)
Join Date: Jun 2002
Location: Vancouver, WA
Posts: 1,296
Likes: 0
Received 4 Likes
on
3 Posts
Car: 87 IROC-Z28
Engine: 305 TPI-New 355 on the engine stand
Transmission: T56
Axle/Gears: 3.73 Eaton posi-Soon a 9" Ford!
we are all like little kids waiting to open a new toy that no one else but us has
Hopefully christmas will come early this year
Hopefully christmas will come early this year
#53
Supreme Member
Join Date: May 2002
Location: Tucson
Posts: 1,512
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 IROC-Z
Engine: 305 TPI
Transmission: T5
So let me get this straight..
Once we have 10 people, you will tell the company that we are prepared to start the group purchase.
Alloy, you will send them the gauge cluster you ordered?
Once they put up the order stuff then all we have to do is put ou CC info etc. and once all ten people antie up. they start production, then it will take like a month or so before they are done? and they will not take money out of the account until all 10 people are accounted for?
I just want a few things cleared up.
1.) The needle, what are we going to do about it to make is visible?
2.) The 194 bulbs behind the gauges, were just going to have to pull them out?
3.) If we do put money into this, no matter what, even if they only sell 10 wich of course won't happen, will we get our gauge kits?
4.) These will be revers style right? All I see on the site are indiglo.
Once we have 10 people, you will tell the company that we are prepared to start the group purchase.
Alloy, you will send them the gauge cluster you ordered?
Once they put up the order stuff then all we have to do is put ou CC info etc. and once all ten people antie up. they start production, then it will take like a month or so before they are done? and they will not take money out of the account until all 10 people are accounted for?
I just want a few things cleared up.
1.) The needle, what are we going to do about it to make is visible?
2.) The 194 bulbs behind the gauges, were just going to have to pull them out?
3.) If we do put money into this, no matter what, even if they only sell 10 wich of course won't happen, will we get our gauge kits?
4.) These will be revers style right? All I see on the site are indiglo.
Last edited by 5SIZ; 03-24-2003 at 11:47 PM.
#54
Originally posted by 5SIZ
3.) If we do put money into this, no matter what, even if they only sell 10 wich of course won't happen, will we get our gauge kits?
4.) These will be revers style right? All I see on the site are indiglo.
3.) If we do put money into this, no matter what, even if they only sell 10 wich of course won't happen, will we get our gauge kits?
4.) These will be revers style right? All I see on the site are indiglo.
3. Yes as long as we get ten we get ours
4. Yes, we are getting the reverse style. The link is: http://www.streetracerparts.com/indiglow_gauges.htm
#55
Supreme Member
Join Date: May 2002
Location: Tucson
Posts: 1,512
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 IROC-Z
Engine: 305 TPI
Transmission: T5
good good.
Now we need to figure out what to do witht he needle, someone said it will still be visible, but how visible will it be?
Now we need to figure out what to do witht he needle, someone said it will still be visible, but how visible will it be?
#56
Supreme Member
iTrader: (16)
Join Date: Jun 2002
Location: Vancouver, WA
Posts: 1,296
Likes: 0
Received 4 Likes
on
3 Posts
Car: 87 IROC-Z28
Engine: 305 TPI-New 355 on the engine stand
Transmission: T56
Axle/Gears: 3.73 Eaton posi-Soon a 9" Ford!
I can confirm that only AFTER we get 10 people registered on the web site for these overlays will your cards be charged. The total is $78.99 with shipping for the REVERSE style overlays. We will get our sets if even if they only sell 10. That's the deal they make with us.
I will also ship the cluster I'm getting out immediately. I'm a UPS shipper and we go to UPS 3-4 times per week. So the most time it will sit here is 24 hours before it ships unless it comes on friday after UPS closes. I want these as much as everyone else, and I can assure you I will not be the one to hold this show up! I will post the day I get the cluster, and tell you when I ship it also.
I'm not sure about the bulbs. I would assume the instructions would have something about that included in them. If not, we can try it with, and without the bulbs.
I don't know about the needles. Maybe someone esle can answer that question for us.
I will also ship the cluster I'm getting out immediately. I'm a UPS shipper and we go to UPS 3-4 times per week. So the most time it will sit here is 24 hours before it ships unless it comes on friday after UPS closes. I want these as much as everyone else, and I can assure you I will not be the one to hold this show up! I will post the day I get the cluster, and tell you when I ship it also.
I'm not sure about the bulbs. I would assume the instructions would have something about that included in them. If not, we can try it with, and without the bulbs.
I don't know about the needles. Maybe someone esle can answer that question for us.
#59
Supreme Member
iTrader: (16)
Join Date: Jun 2002
Location: Vancouver, WA
Posts: 1,296
Likes: 0
Received 4 Likes
on
3 Posts
Car: 87 IROC-Z28
Engine: 305 TPI-New 355 on the engine stand
Transmission: T56
Axle/Gears: 3.73 Eaton posi-Soon a 9" Ford!
The00night-I've sent you a couple of emails about this, but have not gotten a reply back. Did you get my emails? If not we need to find another way of communicating with each other.
So, with "The00night" we now have 10 and I've just sent an email to the company telling them we have 10 people that want these, what years these overlays fit, and that a cluster to use for development is on the way to me and will be shipped to them ASAP. And I also asked them to create the sign up page for us.
As soon as I hear back from them, I'll post and let everyone know the page is up and ready for us. I just might even call them tomorrow and not wait for email!
So, with "The00night" we now have 10 and I've just sent an email to the company telling them we have 10 people that want these, what years these overlays fit, and that a cluster to use for development is on the way to me and will be shipped to them ASAP. And I also asked them to create the sign up page for us.
As soon as I hear back from them, I'll post and let everyone know the page is up and ready for us. I just might even call them tomorrow and not wait for email!
Last edited by alloy; 03-25-2003 at 10:21 PM.
#60
Supreme Member
iTrader: (16)
Join Date: Jun 2002
Location: Vancouver, WA
Posts: 1,296
Likes: 0
Received 4 Likes
on
3 Posts
Car: 87 IROC-Z28
Engine: 305 TPI-New 355 on the engine stand
Transmission: T56
Axle/Gears: 3.73 Eaton posi-Soon a 9" Ford!
Update:
Just heard back from the company making the overlays. The guy must be a night owl or something.
Anyway, he received my email and is going to create the sign up page, and will email me when it's ready. I'll post a link to it here immediately after I receive his email.
Just heard back from the company making the overlays. The guy must be a night owl or something.
Anyway, he received my email and is going to create the sign up page, and will email me when it's ready. I'll post a link to it here immediately after I receive his email.
#61
TGO Supporter
Dan,
Next time you talk to S/R Motorsports, send them the pic of the stock gauge. It would make a whole lot more sense for them to have a link to a picture of the stock gauge in the Model Development page. Also, if you change the topic and The_Prostitute changes his topic to something more specific, I think we can get still more people to buy these (and perhaps more than one person for the 90-92 style). Just some ideas.
Can't wait for that link!
Next time you talk to S/R Motorsports, send them the pic of the stock gauge. It would make a whole lot more sense for them to have a link to a picture of the stock gauge in the Model Development page. Also, if you change the topic and The_Prostitute changes his topic to something more specific, I think we can get still more people to buy these (and perhaps more than one person for the 90-92 style). Just some ideas.
Can't wait for that link!
#63
Supreme Member
iTrader: (16)
Join Date: Jun 2002
Location: Vancouver, WA
Posts: 1,296
Likes: 0
Received 4 Likes
on
3 Posts
Car: 87 IROC-Z28
Engine: 305 TPI-New 355 on the engine stand
Transmission: T56
Axle/Gears: 3.73 Eaton posi-Soon a 9" Ford!
Here are pics of what the reverse overlays look like during the day, and then night when turned on.
Obviuosly these are not for a camaro. They are for illustration
purposes only.
Obviuosly these are not for a camaro. They are for illustration
purposes only.
Last edited by alloy; 03-27-2003 at 02:17 PM.
#66
Member
Join Date: Aug 2001
Location: Cheyenne, WY
Posts: 421
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 T-Top RS
Engine: 305 TBI
Transmission: 700R4
Im in as soon as I get the 80 or so bucks. I'll prolly have to meet up with alloy and give him the money and have him place the order for me .I have no CC anymore hehe. ANyway I'll let you guys know. That stuff looks so cool.
Thread
Thread Starter
Forum
Replies
Last Post