remote side view mirror
Thread Starter
Member
iTrader: (1)
Joined: Apr 2003
Posts: 372
Likes: 0
From: Phoenix, AZ
Car: 1987 IROC-Z / 1992 Corvette
Engine: 305 TPI / LT1
Transmission: 700R4
remote side view mirror
How does the remote mirror attach to the door? The mirror with the joystick looking thing on the end, that moves the mirror.
Thanks
Thanks
It is held in by two bolts, which you'll find on the inside of the door. You have to remove the door panel, which is done by removing the door handle bezel, the arm rest, and snapping the door lock off, then carefully prying the door panel off. You may want to use a door panel remover for this so you don't damage your door skin and/or fasteners, but it's optional. You should be able to find the two bolts holding the mirror on the door at this point. I don't have any ideas how you would get them out though, they look very hard to get to. You're going to need either some type of swivel, or one of those bent wrenches as it's a tight spot.
Mathius
Mathius
Thread Starter
Member
iTrader: (1)
Joined: Apr 2003
Posts: 372
Likes: 0
From: Phoenix, AZ
Car: 1987 IROC-Z / 1992 Corvette
Engine: 305 TPI / LT1
Transmission: 700R4
Mathius, Sorry I should have been more clear. I have the mirror on, I just don't have a clue how to attach the 'paddle' joystick to the door.
Thanks
Thanks
Thread
Thread Starter
Forum
Replies
Last Post





