Body Restoration of my 87 Z28..
#102
Supreme Member
Thread Starter
Join Date: Jan 2003
Location: Paxton, MA
Posts: 1,786
Likes: 0
Received 1 Like
on
1 Post
Car: 1987 Camaro Z28
Engine: 335 TPI Stroker
Transmission: Tremec TKO 500
Axle/Gears: 10 bolt / 3.42
I'm glad someone noticed the silver Bowtie. I've got silver Z28 rocker emblems, a silver rear bumper emblem, and a new nose emblem waiting to be installed.
Since the car was originally red/silver, I wanted to keep some original touches with it. I think it came out really nice. It's not perfect, but I didn't want it to be. It's going to be driven almost daily come summertime.
My interior is pretty bad, but give me a few months and hopefully it will be nice
Thanks for all the comments and I'm glad you guys followed through with this thread! It's been a process since October.
Since the car was originally red/silver, I wanted to keep some original touches with it. I think it came out really nice. It's not perfect, but I didn't want it to be. It's going to be driven almost daily come summertime.
My interior is pretty bad, but give me a few months and hopefully it will be nice
Thanks for all the comments and I'm glad you guys followed through with this thread! It's been a process since October.
#103
Supreme Member
Thread Starter
Join Date: Jan 2003
Location: Paxton, MA
Posts: 1,786
Likes: 0
Received 1 Like
on
1 Post
Car: 1987 Camaro Z28
Engine: 335 TPI Stroker
Transmission: Tremec TKO 500
Axle/Gears: 10 bolt / 3.42
I took some more pics. Cleaned it up and put the parkings lights and side markers in.
This picture shows how "ghost" it is.
This picture shows how "ghost" it is.
#104
Supreme Member
iTrader: (1)
Join Date: Mar 2003
Location: north plainfield, nj
Posts: 2,177
Likes: 0
Received 0 Likes
on
0 Posts
Car: 05' GTO
Engine: 6.0L
Transmission: A4
DAMN!!!!!!!!!!!!!!! i wish i had money to get my car repainted, maybe after the summer. that turned out really really good for the price. that guy did an awsome job on that. cant wait to see it with some polished rims and a nice interior.
#105
#106
Senior Member
iTrader: (4)
Join Date: Sep 2003
Location: w. boylston mass
Posts: 908
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 formula
Engine: 305
Transmission: t5
hey tuned port 335
were you still interested in teh black interior parts i had ? black interior would make that car look sick
and whats up with the rejection sticker ??
the ghost flames look mint, and the bowtie on the hood gives it a nice touch
and whats up with the rejection sticker ??
the ghost flames look mint, and the bowtie on the hood gives it a nice touch
#107
Supreme Member
Thread Starter
Join Date: Jan 2003
Location: Paxton, MA
Posts: 1,786
Likes: 0
Received 1 Like
on
1 Post
Car: 1987 Camaro Z28
Engine: 335 TPI Stroker
Transmission: Tremec TKO 500
Axle/Gears: 10 bolt / 3.42
Re: hey tuned port 335
Originally posted by white91formula
were you still interested in teh black interior parts i had ? black interior would make that car look sick
and whats up with the rejection sticker ??
the ghost flames look mint, and the bowtie on the hood gives it a nice touch
were you still interested in teh black interior parts i had ? black interior would make that car look sick
and whats up with the rejection sticker ??
the ghost flames look mint, and the bowtie on the hood gives it a nice touch
Just barely though. If I ran the car hard and drove it to inspection, it would pass with flying colors. But it was only running for 5 minutes
I don't have the money right now for the interior, but keep in touch with me if you still have it in the future.
#110
Moderator
Looks great!
Just some questions.....
Are you going to paint the headlight pockets black?
New rims in the future? I think that would top it off!
Just some questions.....
Are you going to paint the headlight pockets black?
New rims in the future? I think that would top it off!
#111
Supreme Member
Join Date: Jun 2001
Location: Allensville, PA
Posts: 1,012
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Trans Am GTA
Engine: 5.7 TPI (Now HSR)
Transmission: 700R4 by Probuilt
Axle/Gears: 3:27 9 Bolt Posi W/ Discs
that paint looks awesome man I really like the color and the flames look killer. I do however think it would look better with black headlight pockets and maybe a black grille with the red bowtie. It did turn out really nice though.
#112
Supreme Member
Thread Starter
Join Date: Jan 2003
Location: Paxton, MA
Posts: 1,786
Likes: 0
Received 1 Like
on
1 Post
Car: 1987 Camaro Z28
Engine: 335 TPI Stroker
Transmission: Tremec TKO 500
Axle/Gears: 10 bolt / 3.42
Originally posted by IROCThe5.7L
Looks great!
Just some questions.....
Are you going to paint the headlight pockets black?
New rims in the future? I think that would top it off!
Looks great!
Just some questions.....
Are you going to paint the headlight pockets black?
New rims in the future? I think that would top it off!
New wheels are a definite in the future. Its gonna be awhile, since I'm gonna go wild when I pick wheels. They will either be Boyds or Budniks
#114
Supreme Member
Thread Starter
Join Date: Jan 2003
Location: Paxton, MA
Posts: 1,786
Likes: 0
Received 1 Like
on
1 Post
Car: 1987 Camaro Z28
Engine: 335 TPI Stroker
Transmission: Tremec TKO 500
Axle/Gears: 10 bolt / 3.42
Originally posted by Spdfrk1990
yeh black headlight pockets wouldnt look good. Now some modern hids like some beemer halo or somethin would look sweet
yeh black headlight pockets wouldnt look good. Now some modern hids like some beemer halo or somethin would look sweet
#115
Supreme Member
Join Date: Apr 2002
Location: Cincinnati
Posts: 2,972
Likes: 0
Received 0 Likes
on
0 Posts
Awsome im gettin depressed cause i cant work on my car cause bein in school is makin me broke. When i grad my car is gonna get alot more attention Your car is just amazing tho love the ghost flames
#116
Moderator
Originally posted by TunedPort 335
The black headlight buckets would ruin it IMO. With any custom style paint you want it to have a matching overall theme, otherwise it would look like the ghost flames are plopped onto the paint. I wanted to get rid of the mid 80's Mustang look and my goal is to "modernize" the car, where as I thought the black pockets showed more of an 80's style.
New wheels are a definite in the future. Its gonna be awhile, since I'm gonna go wild when I pick wheels. They will either be Boyds or Budniks
The black headlight buckets would ruin it IMO. With any custom style paint you want it to have a matching overall theme, otherwise it would look like the ghost flames are plopped onto the paint. I wanted to get rid of the mid 80's Mustang look and my goal is to "modernize" the car, where as I thought the black pockets showed more of an 80's style.
New wheels are a definite in the future. Its gonna be awhile, since I'm gonna go wild when I pick wheels. They will either be Boyds or Budniks
Thats cool! Car looks hottttttttttttttttttttt! :hail:
Even though my cars black anyway, my headlight pockets were also painted the same color as the rest of my car when it was repainted.
#117
Supreme Member
Join Date: May 2001
Location: Your neighbor's hood, MD
Posts: 2,228
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1987 Camaro Z28 IROC-Z
Engine: 5.7L TPI
Transmission: T5
Axle/Gears: 3.42:1
Originally posted by TunedPort 335
Do you read my mind or something? I'm swapping in Monte Carlos LS one peice lights this summer
Do you read my mind or something? I'm swapping in Monte Carlos LS one peice lights this summer
$.02...
Last edited by ES87iroc; 01-18-2004 at 10:05 AM.
#119
Senior Member
Join Date: Nov 2002
Location: Long Island, New York
Posts: 998
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91RS
Engine: 305tbi
Transmission: 700R4
I don't care for those 1 piece lights much either. I was thinking about it, so I photoshopped them and had a before and after pic on my desktop for a while and decided I liked the stock look better. Even though the one piece is pretty unique and cool in that sense.
#120
Supreme Member
Join Date: Feb 2003
Location: chesapeake va
Posts: 1,473
Likes: 0
Received 0 Likes
on
0 Posts
Car: 08 Sierra, 08 Silverado, 91 z28
Engine: 5.3, 4.3, 5.7
Transmission: autos
Originally posted by ES87iroc
ACK! Why can't folks just leave well enough alone. "halo" lamps look completly out of place as a round lamp on a square car in a square headlamp hole, and the one piece lights look cheap IMHO. The nose of the car tapers to a point in the center, and the headlamps are staggered so as to match such, which you cannot do with a one piece lamp. The stock lamps look great, on some things less is clearly more.
$.02...
ACK! Why can't folks just leave well enough alone. "halo" lamps look completly out of place as a round lamp on a square car in a square headlamp hole, and the one piece lights look cheap IMHO. The nose of the car tapers to a point in the center, and the headlamps are staggered so as to match such, which you cannot do with a one piece lamp. The stock lamps look great, on some things less is clearly more.
$.02...
#121
Supreme Member
Join Date: Apr 2002
Location: Cincinnati
Posts: 2,972
Likes: 0
Received 0 Likes
on
0 Posts
Geeze there r some rounds things on a camaro and bmw's arent exactly very curvy cars also. I think if they were done right they would look like they were made for it.
#122
Supreme Member
Thread Starter
Join Date: Jan 2003
Location: Paxton, MA
Posts: 1,786
Likes: 0
Received 1 Like
on
1 Post
Car: 1987 Camaro Z28
Engine: 335 TPI Stroker
Transmission: Tremec TKO 500
Axle/Gears: 10 bolt / 3.42
Originally posted by ES87iroc
ACK! Why can't folks just leave well enough alone. "halo" lamps look completly out of place as a round lamp on a square car in a square headlamp hole, and the one piece lights look cheap IMHO. The nose of the car tapers to a point in the center, and the headlamps are staggered so as to match such, which you cannot do with a one piece lamp. The stock lamps look great, on some things less is clearly more.
$.02...
ACK! Why can't folks just leave well enough alone. "halo" lamps look completly out of place as a round lamp on a square car in a square headlamp hole, and the one piece lights look cheap IMHO. The nose of the car tapers to a point in the center, and the headlamps are staggered so as to match such, which you cannot do with a one piece lamp. The stock lamps look great, on some things less is clearly more.
$.02...
The one peice lights will have a taper effect to them, Monte Carlo's dont have a flat front end...they taper just like our cars.
:lala:
Last edited by TunedPort 335; 01-18-2004 at 01:34 PM.
#123
Supreme Member
Join Date: Nov 2001
Location: Ocean, NJ
Posts: 4,456
Likes: 0
Received 2 Likes
on
2 Posts
Car: Check The Sig
car is looking good, but there is something missing... dont know what. If I figure it out, Ill tell ya. I kinda like the black pockets myself. Just something in all one color is odd. I think these cars have very unique lines and darker colors help accent them better, but thats my opinion. Either way, the flames look AWESOME! Job well done. I feel bad Ill never see it now! Maybe we could all meet, or maybe Ill see your car at nats. Good luck with the car man. Keep her clean.
#125
Supreme Member
iTrader: (1)
Join Date: Oct 2001
Location: decatur IL
Posts: 1,056
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 iroc, 87 iroc, 89 iroc, 89 formula, 84 supra, 85 trans am
Engine: t\a motor 355 lt1 intake, t56,the works, 89 roc 427 sbc tt project
Transmission: to many to list
Axle/Gears: 9bolt 4:10 in the T/A
my nose was also painted all the same color (9700 black), and all the satin black is gone except for thedoor handels and locks. even the cowl is going 9700. my car should be all painted this week. its been a long 4 months of work (over 250 hours in body work alone), but well worth it. next i get to start on the motor and 6 speed.
#126
Supreme Member
iTrader: (1)
Join Date: Oct 2001
Location: decatur IL
Posts: 1,056
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 iroc, 87 iroc, 89 iroc, 89 formula, 84 supra, 85 trans am
Engine: t\a motor 355 lt1 intake, t56,the works, 89 roc 427 sbc tt project
Transmission: to many to list
Axle/Gears: 9bolt 4:10 in the T/A
every thing was striped to bare metal (i mean everything). the rolling chassis should be done this week, and that will be the last of the painting until i get the motor and tranny and rear out of it to do the engine bay and floor boards 9700 clear coat for the shine.
#127
Supreme Member
iTrader: (1)
Join Date: Oct 2001
Location: decatur IL
Posts: 1,056
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 iroc, 87 iroc, 89 iroc, 89 formula, 84 supra, 85 trans am
Engine: t\a motor 355 lt1 intake, t56,the works, 89 roc 427 sbc tt project
Transmission: to many to list
Axle/Gears: 9bolt 4:10 in the T/A
love your gost flames. nice touch. now you need flames in your headliner and door panels to match.
last one of my pics for now. this is one with it in the air to work on the under side and wheel wells.
last one of my pics for now. this is one with it in the air to work on the under side and wheel wells.
#128
Supreme Member
Thread Starter
Join Date: Jan 2003
Location: Paxton, MA
Posts: 1,786
Likes: 0
Received 1 Like
on
1 Post
Car: 1987 Camaro Z28
Engine: 335 TPI Stroker
Transmission: Tremec TKO 500
Axle/Gears: 10 bolt / 3.42
Niiice progress Azzker. I see you've got the same rot problems I had behind the front wheels? It's a shame that these cars are rusting away, but its cool that people like me and you are bringing them back to life.
As I said before I had all new emblems I just need to put them on
As I said before I had all new emblems I just need to put them on
#129
Supreme Member
iTrader: (1)
Join Date: Oct 2001
Location: decatur IL
Posts: 1,056
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 iroc, 87 iroc, 89 iroc, 89 formula, 84 supra, 85 trans am
Engine: t\a motor 355 lt1 intake, t56,the works, 89 roc 427 sbc tt project
Transmission: to many to list
Axle/Gears: 9bolt 4:10 in the T/A
yea i had to patch the drivers rear wheel well in several spots by welding in new sheet metal, and had to replace the pass side front rocker portion, and the drivers floor areah around were the rust in the pic is.
here is the pass side rocker.
i also am getting new emblems, i have half of them, trying to locate the rest of them, and get my new gm decals.
thanks
anthony
here is the pass side rocker.
i also am getting new emblems, i have half of them, trying to locate the rest of them, and get my new gm decals.
thanks
anthony
#130
Supreme Member
Join Date: Sep 2001
Location: Decatur, Illinois
Posts: 2,906
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by TunedPort 335
Niiice progress Azzker. I see you've got the same rot problems I had behind the front wheels? It's a shame that these cars are rusting away, but its cool that people like me and you are bringing them back to life.
As I said before I had all new emblems I just need to put them on
Niiice progress Azzker. I see you've got the same rot problems I had behind the front wheels? It's a shame that these cars are rusting away, but its cool that people like me and you are bringing them back to life.
As I said before I had all new emblems I just need to put them on
I have a decent amount of surface rust that was hidden under the gfx, but am working on that. The only rust that I have found that really went through was on the passenger side floorboard. It looks like someone left a leaky heater core in to long because it is only in the front of the passenger side where the passengers feet would be. I am going to have that patched. I was lucky enough to not have those rusted spots behind the front wheels when I pulled the fenders off. Other than under the ground effects(which is mostly surface rust), and the floorboard the car really doesnt have much rust. I believe that the car was garaged most of its life. When I got it the paint was still real nice, and for a 85 which was a bad year for paint(especially blue from van nuys like mine) that is pretty uncommon. This is the third winter that it has been inside though so it hasnt seen snow or salt in quite a while. I had the car parked outside and drove it one winter and the paint started pealing real bad on the hood and was starting on the roof. I have a set of doors w/ power windows locks, and mirrors that will be put on the car when it is painted from an 89 gta. I have the wiring already in the car. The are red, but since I will be stripping them and having them painted that is fine. I have a quite a way to go, but the car should be nice eventualy.
Your car looks awsome now though. I hope mine turns out that well. I am going to try to get pictures of what I have done so far but I guess we will see.
Ben
#131
Senior Member
Join Date: Jun 2003
Location: Acworth/Marietta, GA
Posts: 749
Likes: 0
Received 0 Likes
on
0 Posts
Car: 88 IROC
Engine: 350 TPI
Transmission: Pro 5.0 shifted T56
Axle/Gears: 10 bolt 3.73 posi
I failed emmissions
Haha, when I had my 85 Iroc, (wicked motor, no cat) I put it on the emissions dyno just for giggles. I didnt even have the probe in the tailpipe yet, it was about a foot away and the computer said "999 Error" LOL!
That car would make your eyes water if you stood behind it
By the way, your paintjob sucks and my 3.1 will kick your z28s ***!!!!!
..........Ok not really, im just really jealous right now, AWESOME PAINT!!! i cant tell if its red or orange?! I love it!!!
#134
Senior Member
Join Date: Nov 2003
Location: logan co. wv
Posts: 649
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 camaro
Engine: 2.8 multiport cross fire injection
Transmission: 5 speed
man ive seen alot of camaros and love custom ones but i have to say this...
THAT HAS GOT TO BE ONE OF THE BEST LOOKING ONES EVER!!!!!!!!!
if not the best i love the ghost flames paint and the red its absolutely gorgeous car!!!!!
i love it great job and choice on havin it done that way n great job by guy who made it
goin thru resto of my 86 plain janer now
wished i could afford new everyhtgin for now gotta just work w/ what i got but later piece at time all new doors and fenders maybe
and ground effects and shaved handles
for now im goin to get it done to be driven and then buy rest of what i want for it then do that n begin other projects lol got some already lined up
great lookin car tho man its just i dunno speechless basically
will post pics of my own once painted
or maybe start one now of the before shots n completely primered ones
all who read this keep yur eyes out will be posting my own soon
THAT HAS GOT TO BE ONE OF THE BEST LOOKING ONES EVER!!!!!!!!!
if not the best i love the ghost flames paint and the red its absolutely gorgeous car!!!!!
i love it great job and choice on havin it done that way n great job by guy who made it
goin thru resto of my 86 plain janer now
wished i could afford new everyhtgin for now gotta just work w/ what i got but later piece at time all new doors and fenders maybe
and ground effects and shaved handles
for now im goin to get it done to be driven and then buy rest of what i want for it then do that n begin other projects lol got some already lined up
great lookin car tho man its just i dunno speechless basically
will post pics of my own once painted
or maybe start one now of the before shots n completely primered ones
all who read this keep yur eyes out will be posting my own soon
#135
Supreme Member
Thread Starter
Join Date: Jan 2003
Location: Paxton, MA
Posts: 1,786
Likes: 0
Received 1 Like
on
1 Post
Car: 1987 Camaro Z28
Engine: 335 TPI Stroker
Transmission: Tremec TKO 500
Axle/Gears: 10 bolt / 3.42
Thanks for all the positive comments guys. I'm glad everyone likes it. It's red, its called GM 81 Bright Red, it came on the newer Firebirds. It does have alot of "orange" in it though compared to my dads red car.
Oh...and I put the nose emblem and bumper emblem on, it took 2 seconds..
Oh...and I put the nose emblem and bumper emblem on, it took 2 seconds..
#137
Supreme Member
Thread Starter
Join Date: Jan 2003
Location: Paxton, MA
Posts: 1,786
Likes: 0
Received 1 Like
on
1 Post
Car: 1987 Camaro Z28
Engine: 335 TPI Stroker
Transmission: Tremec TKO 500
Axle/Gears: 10 bolt / 3.42
Yeah I haven't gotten any good pictures outside yet. The flourescent lights inside my garage make the color look different than it really is.
I don't wanna pull all the way out into my driveway for fear that I will get stuck (1 inch of snow, bald rear tires, not good...LOL)
I don't wanna pull all the way out into my driveway for fear that I will get stuck (1 inch of snow, bald rear tires, not good...LOL)
Thread
Thread Starter
Forum
Replies
Last Post
Hotrodboba400
Firebirds for Sale
3
12-10-2019 07:07 PM
Kenwood
Engine/Drivetrain/Suspension Parts for Sale
1
09-04-2015 05:50 PM