Those Plastic screws
Thread Starter
Supreme Member
iTrader: (8)
Joined: Aug 2003
Posts: 7,240
Likes: 6
From: LeRoy, NY
Car: 2003 Hyundai Tiburon GT
Engine: 2.7L V6
Transmission: 6-speed
Axle/Gears: 4.41
Those Plastic screws
You know the ones I'm talking about.... The ones that hold the rear hatch paneling together. I've heard you can buy them somewhere besides GM, but I can't remember where. I found one of them but no more than that, and I need at least six, I think.
part numbers
i went through the same hassle and now have the official GM part number.
the fastener (screw) is GM p/n 20432852
the nut (thing that the screw screws into it GM p/n 20370594
i ordered one bag (qty: 10) of the nuts for 10.60
and 2 bags (qty: 5/bag) of the fastener for 18.90
kinda expensive but my interior looks many many times better actually put together.
the fastener (screw) is GM p/n 20432852
the nut (thing that the screw screws into it GM p/n 20370594
i ordered one bag (qty: 10) of the nuts for 10.60
and 2 bags (qty: 5/bag) of the fastener for 18.90
kinda expensive but my interior looks many many times better actually put together.
TGO Supporter
Joined: Sep 2000
Posts: 6,775
Likes: 27
From: So.west IN
Car: 87 Formula/ 00 Xtreme
Engine: TPI 305/ v6
Transmission: struggling t-5/ 4l60E
Axle/Gears: 3.08/ 3.23
Alot of paint supply houses carry most any and all makes of fasteners for fairly cheap.
Lowes (where I live) interestingly, carries them in the 'hard to find' fasteners section.
Lowes (where I live) interestingly, carries them in the 'hard to find' fasteners section.
Supreme Member
iTrader: (2)
Joined: Jan 2003
Posts: 1,857
Likes: 0
From: Maryland...DO I HAVE TO ADMIT TO THAT?!
Car: 1991 Chevy Camaro RS
Engine: 283
Transmission: 700r4 Auto
Re: part numbers
Originally posted by demonchild
i ordered one bag (qty: 10) of the nuts for 10.60
and 2 bags (qty: 5/bag) of the fastener for 18.90
kinda expensive but my interior looks many many times better actually put together.
i ordered one bag (qty: 10) of the nuts for 10.60
and 2 bags (qty: 5/bag) of the fastener for 18.90
kinda expensive but my interior looks many many times better actually put together.
Thread Starter
Supreme Member
iTrader: (8)
Joined: Aug 2003
Posts: 7,240
Likes: 6
From: LeRoy, NY
Car: 2003 Hyundai Tiburon GT
Engine: 2.7L V6
Transmission: 6-speed
Axle/Gears: 4.41
black is preffered since I am planning on changing my interior color to black, but gray is okay too. I only have one and need at least six and probably four clips to go with them just in case.
Trending Topics
Supreme Member
iTrader: (1)
Joined: Mar 2003
Posts: 2,177
Likes: 0
From: north plainfield, nj
Car: 05' GTO
Engine: 6.0L
Transmission: A4
if you go to your local Pepboys, we carry them in one of the isle with all the fasteners and bolts and whatnot, i think we got black and gray and i know we carry the plastic clips ( i know i needed quite a few)
If you can't find them anywhere, let me know. I should have the gray ones from when I replaced my gray interior with black. If I can find them, you can have them, though I doubt I have any of the clips.
Junior Member
Joined: Aug 2003
Posts: 93
Likes: 0
From: Tuckerton, NJ
Car: 89 T/A
Engine: 305 TBI (Hopefully LS1 someday)
Transmission: 700 R4 (T-56 is planned too)
www.perrypam.com
They have all kinds of interior parts. I've seen them on their site
They have all kinds of interior parts. I've seen them on their site
Thread
Thread Starter
Forum
Replies
Last Post
RedLeader289
Tech / General Engine
10
May 28, 2019 01:47 PM
MrPackstin
Interior Parts for Sale
11
Oct 25, 2017 08:09 PM
LT1Formula
Engine/Drivetrain/Suspension Parts for Sale
7
Oct 8, 2015 08:34 PM





