Hood wont open
Thread Starter
Member
Joined: Dec 2003
Posts: 137
Likes: 0
From: Pa
Car: 2001 SS Camaro
Engine: 350
Transmission: T56
Axle/Gears: I should know this
Hood wont open
Welp, i was testing my subs and i failed to realize they drain the batter very quickely. So needless to say my car didnt start and being the quick thinker i am i proceeded to get ready to charge my battery. So i open the hood... i... hopen the hood.... DAMN HOOD.
It woudlnt open.
When i pull the latch it sounds like it unlached something but nothing opens.
Is this common? and is there any way to get it open? It's never done this before.
It woudlnt open.
When i pull the latch it sounds like it unlached something but nothing opens.
Is this common? and is there any way to get it open? It's never done this before.
Supreme Member
Joined: Dec 1999
Posts: 1,563
Likes: 0
From: Where the heck am I !..Oh yeah,in Lousy-ana.
Car: 1991 Z28
Engine: 350 TPI
Transmission: 4L60 automatic
Try giving the hood a good light tap with the bottom of your fist(pinky side) near the bend in the middle and about 1ft from the front of the hood.It works on firebirds it may work on camaros too.
Senior Member
Joined: Jul 2002
Posts: 754
Likes: 0
From: South East MI
Car: 1992 Camaro RS AKA Big Nasty
Engine: Carbed '79 350 block, 360hp/380ftlbs (flywheel)
Transmission: 6speed from an unidentified 4th gen. ask me, ill tell you.
muwahaha, finally i can insert some "real" tech advise. My car does athat all the time. I tell my buddies that it is my camaros magic trick. If you pull the latch in the car.. and it doesnt open, just try shutting your drivers side door a little harder than normal ( well maybe even just normally. We al know bout our heavy a$$ doors). That little jolt is always enough to pop the hood open. Tada ! ad thats my magic trick.
Thread Starter
Member
Joined: Dec 2003
Posts: 137
Likes: 0
From: Pa
Car: 2001 SS Camaro
Engine: 350
Transmission: T56
Axle/Gears: I should know this
lol magic trick, i'll go give all this suggestions a try, i allready tryed the first one which was yanking on it (think i pulled something) 
Nothing worked
im glad its shacked up for the winter or i'd be in a real fix. The old Wrangler never had this problem

Nothing worked
im glad its shacked up for the winter or i'd be in a real fix. The old Wrangler never had this problem
Last edited by Scotty562; Jan 14, 2004 at 05:52 AM.
Supreme Member
Joined: Oct 2003
Posts: 1,096
Likes: 0
From: North --RI
Car: 92 caddy PIMP
Engine: 4.8
Transmission: i dunno
my hood is a bitch sometimes. The previous owner said sometimes hed drive around just to get it open.
hehe. anyway I usually hit it pull the hood release thing a few times again hit it again till it opens usually works in a few shots. Then spray some wd 40 into the latch.
Best of luck
Nate
hehe. anyway I usually hit it pull the hood release thing a few times again hit it again till it opens usually works in a few shots. Then spray some wd 40 into the latch.Best of luck
Nate
Trending Topics
Member
Joined: May 2003
Posts: 191
Likes: 0
From: Summerville, South Carolina
Car: 1987 Camaro Sport Coupe
Engine: 305 (LG4)
Transmission: 700R4
Try having someone lift up on the hood by the headlight pokets as you pull the release. If that don't work try to get under the bumper and see if the cable is still in place. Or maybe you can pop it from undreneath (I have done this a couple of times)
Member
Joined: Dec 2003
Posts: 180
Likes: 0
From: Everett, WA (Seattle)
Car: 83 Pontiac Firebird S/E
Engine: 305
Transmission: Borg Warner T5
Originally posted by OutLaw305
just try shutting your drivers side door a little harder than normal ( well maybe even just normally. We al know bout our heavy a$$ doors). That little jolt is always enough to pop the hood open. Tada ! ad thats my magic trick.
just try shutting your drivers side door a little harder than normal ( well maybe even just normally. We al know bout our heavy a$$ doors). That little jolt is always enough to pop the hood open. Tada ! ad thats my magic trick.
Supreme Member
Joined: Jun 2003
Posts: 1,054
Likes: 0
From: Ft. Branch, In.
Car: 88 formula WS6
Engine: 305 Lo3
Transmission: 700-R4
Another suggestion!
Go to the front and push down so the hood will re-latch and try pulling the release again. It might take 2 or 3 times to get it to pop open. after you get it open and spray the hell out of it, pop the spring coil off the hood and stretch it out about an inch. They get weak as time go's by and they don't work so well! It cured my problem!
Thread Starter
Member
Joined: Dec 2003
Posts: 137
Likes: 0
From: Pa
Car: 2001 SS Camaro
Engine: 350
Transmission: T56
Axle/Gears: I should know this
i got it open woooo
turns out i wasnt pulling hard enough
the 1st or 2nd post was right, it just needs a little coaxing lol
I love it
turns out i wasnt pulling hard enough
the 1st or 2nd post was right, it just needs a little coaxing lol
I love it
Supreme Member

Joined: Jul 2003
Posts: 2,779
Likes: 2
From: any clime or place...
Car: 1987 Camaro SC, 1999 Z28
Engine: GMPP 350HO, LS1
Transmission: Built 700r4/EDGE 3200, T56
Axle/Gears: 3.42 Eaton 7.625, 3.42 Zexel Torsen
i just tug on mine, good thing i'm not strong enough to bend steel
Supreme Member
Joined: Apr 2003
Posts: 1,265
Likes: 2
From: Hill AFB, Utah
Car: 1988 Trans Am GTA Notchback
Engine: 305ci, 5.0L, TPI, HO
Transmission: Borg Warner T5 5-Speed
Axle/Gears: 9-Bolt Positraction Rear w/3.45 Grs
I'm glad you got it open, kind of hard to work on your car when the hood won't open.
Thread
Thread Starter
Forum
Replies
Last Post
Hotrodboba400
Firebirds for Sale
3
Dec 10, 2019 07:07 PM
Hotrodboba400
Firebirds for Sale
0
Sep 2, 2015 07:28 PM





