Sickness91Z28

iTrader: (1)

I definently thought it could have been built WAY better...alot of hacking had to be done..but it paid off in the end. I went ahead and used my stock cable...I just swapped brackets and everything works great...I didn't have to crawl underneath the car or anything. Here are a few pics

Sickness91Z28

iTrader: (1)

...

Sickness91Z28

iTrader: (1)

..

nolanr0413

cool. I hear they have a problem though. that you can start them in gear if you happen to leave the car in gear . I thought they have a neutral start, or some crap.

Sickness91Z28

iTrader: (1)

not sure why people said they will start in any gear. It only starts in Neutral and in Park. The bad side about it is that you don't have to have the keys in the ignition to get the car in gear, you can put it in gear anytime you want....and you don't even have to push the brake in.

86transamws6

Hows that bad? That would be no different than being able to shift a manual into gear with the key not in the ignition. BTW what the "power plate" switch do? LOL it looks pretty sweet, NO2 or something else?

Sickness91Z28

iTrader: (1)

I love how people think on here...lol....but your right man, I never thought about it that way. The "power plate" is for my elctronic exhuast cutout. "McCord Power Plate II". So I thought I'd have some decals made up that said "Power Plate" and put'em on. I've had so many people think that it's nitrous...lol

91Zman

I may try and install the one that I had on my '73 camaro,just hope that it's not a PIA to do.

CaptPicardsZ28

I installed mine in my car over a year ago and I dont like it at all. It is hard to get out of park and shift. I returned it once and they said it was fine and gave me another one. Still the same results. Cable is not kinked or anything. I maybe should have just used my stock cable but they said not to so I didnt. It looks nice though. I also didnt put any locktite on mine and the threads are all stripped. Now I need a new stick and handle. Oh well....live and learn.

yamahaguy91

i have had mine on for about 2 years and love it to death. as for it being hard to shift try adjusting you cable at the tranny. mine was the same way until i adjusted it down there. i like it alot better then the dual gate one i think its ugly

JestahX

Whats "Power Plate"???

305RSlc

Damn I miss that shifter. I installed mine about 10 months ago, and then in Feb. my car got totaled and I didn't get it out. It was by far the best mod I had done to that car....so much fun to drive, looked cool as hell, and just gave the car a better feel with car/driver communication. The only PITA part about it is adjusting the cable...so if you can use the stock one I would suggest that...saves A LOT of unnecessary work and time.

7plagues

iTrader: (1)

P O W E R P L A T E!!!!! thats great.

85berlinetta2.8

so whats the point of a mega shifter?

305RSlc

The ability to shift from one gear to another without missing a single gear due to its ratcheting action. More precise, firmer, and faster shifts when done manually. Not to metion it looks awesome in these cars IMO.

85berlinetta2.8

so it goes on a manual trans or auto?

85berlinetta2.8

oh i looked at the pedals looks like an auto...

so whats so different about driving with this thing than just going 1,2,d,od with my regular one?

Sickness91Z28

iTrader: (1)

The "power plate" is for my electronic exhaust cutout. "McCord Power Plate II". So I thought I'd have some decals made up that said "Power Plate" and put'em on. I've had so many people think that it's nitrous...lol


I basically got this shifter for the looks because I don't race my car. BUT, this shifter really does help if you want to race. Throw it into low....tach it out...and hit the shifter up...then tack it out again...hit it up...keep doing that....it makes it so you can't skip a gear and you CAN NOT hit reverse with it, which is great. It's a very strong shifter....the hardest part is getting it out of park....takes alot of muscle....but it's a great shifter and I love the looks of it

thirdgen88

Yeah, just transferred my megashifter from my old red firebird over to my GTA.. It feels great to have it back!! Its harder to shift out of park, but not really that bad. Takes a bit more muscle, but the ability to control your shifts positively is a great reward for that little inconvenience.. Its really great when you've got an awesome tranny with firm shifts and you can bang out the gears!

I used a fresh B&M cable on mine. The adjustment is very simple and I like the design of the B&M cable, seems nice a solid..

Charlie's87

Looks sweet!

Where'd you get those pedals? Are they clamp ons or replacements? I'd like a set of those for my IROC!

Sickness91Z28

iTrader: (1)

I got those pedal covers (clap on) on ebay for really cheap...like 12 bucks. They are all aluminum...so I polished'em up. They used to have "type-r" printed in them...but I sanded it off...and polished'em....now they look great

CaptPicardsZ28

what adjustment is needed? How is it done? Mine is still hard to shift...

yamahaguy91

CaptPicardsZ28 what adjustment is needed? How is it done? Mine is still hard to shift...

man i dont know about you guys but i bought mine new and theres a paper in there call instructions j/k



85berlinetta2.8: its so you dont go from 1,3 you can hit it as hard as you want and you will only go 1,2,3. it was made for drag racing.
:hail:

Sickness91Z28

iTrader: (1)

i might try to adjust mine down at the tranny....mine is really hard to get outta gear...but after that...it seems to be great...myabe that would do the trick...

yamahaguy91

mine was hard to get out of park to. and i just left it like that untill my friend installed one in his rusttang and adjusted his right. i seen how much nicer it was so i just went back and adjusted mine. just read your instructions and then read them again until you get it trust me it will work and be alot better.

HaroGt14

My buddy works for Detroit Speed And Enginerring . . . when I put my shifter in it was hard to pull it out of gear . . . . He told me to put a washer under the 2 front bolts where it bolts to the transmission. I did it and it goes in and out of park easy because there is less tension on the cable.

Hope this helps,

Sean

kd5boc

By the way...hope you keep a towel or rag handy to cover it when you leave it in the sun...that S.O.B. gets HOT!!!!

I ended up buying the black plastic handle...doesn't look too shabby either.

Tom

MdFormula350

nice install!

1bad406rs

hey 84custom are your gauges glow gauges? i see alot of white overlays but cant find the glow ones

CAMp3RO

if you're having a hard time switching gears, best advice i can give. put the tranny in the center most position (whether it be D or OD) then put the shifter in the same position. then adjust the cable accordingly at the tranny side. i had a mechanic mess mine up when they swore they didnt touch anything..... no probs since

Sickness91Z28

iTrader: (1)

They are just the White Faced Gauges made by Macewen....the very best of quality! They don't glow or anything....I just have them backlit with LED's

1bad406rs

where did u find the LED's @ and how much did they cost?

grngryoutmyway

iTrader: (1)

Looks awesome man, I love how the alum **** goes with your alum plate.. would look good with some alum on the dash.. that rollbar should accent it nicely as well

CrazyHawaiian

I've adjusted the crap out of the Mega Shifter both times I've dealt with them (89 RS and 89 IROC). I've always had that problem with getting it out of park. I gave my last one away for free I hated it so much. My IROC came with another Mega Shifter (previous owner mod). Feel like I cant get away from these things. Never tried the washer though. I'll have to give it a try.

grungera91Z

What kind of hacking did you have you have to do? Was there any wiring involved? Instructions simple/straightforward? I'am considering buying one....

Sickness91Z28

iTrader: (1)

Since I used the factory bracket....I had to do alot of hacking...because I kind of broke all the rules. To me, the wiring was very simple....but i had to mess with the swtich alot..and set it up perfectly because my reverse lights were on constantly. The instructions recommend that you buy a relay from radio shack....I did....but didn't use it. It works exactly the same with the relay not installed...I notice no difference at all. The instructions aren't to bad. If your concerdering buying one...do ALOT of research before you buy it. I did 4 months or research beore I bought mine..and by the time I read through the instructions...and got to doing it....everything seemed to make sense.

yamahaguy91

i do not understand why everyone says you have to do alot of hacking this is the only part you have to hack.


as for ALOT of RESEARCH...... WHY???????? what do you need to research about it??? its a ratch style shifter



grungera91Z: its not nowhere as hard as everyone makes it sound if you can change your alt. you can do this

thirdgen88

Bah.. You Camaro folk have it easy.. People with '85 and up firebirds/ta's are the ones that have to get creative!

Sickness91Z28

iTrader: (1)

I guess you didn't understand how I installed mine....

I did not use the cable they supplied...I used the factory cable....SO, I have to cut the brackets off, dirll holes, shave metal...ect.....so..that's where the hacking came from when I installed mine.

yamahaguy91

ok now i see where iam sorry i used the cable B&M sent with it..

PhAnToMs

iTrader: (2)

so basically you do this all from inside the car? you dont have to go under the hood and ajust tv cable or nothing? or crawl under car to do anything ? just remove bolts and install? im considering this my friend has one and it looked sweet anyone post all the directions on how to install one? and the cable they give you wehres that go?

Sickness91Z28

iTrader: (1)

If you use the cable they supplied, which just about everyone does...you will have to get underneath the car....and do plenty of adjustments. I used my factory cable....and I had to modify the shifter and make a bracket....but that way....I didn't have to crawl underneath the car or anything.

FSTFBDY

iTrader: (33)

I use to have it. Didnt like it. like someone said above it was a real PITA to get in and outa gear. Ended up selling it dirt cheap on here..

Yes that handle use to get hot. I had this handle on mine.
BTW use to be a 5spd car, swaped to auto long ago. now swaping back to a T56 and sellin the 4l60e

redbird_400

Is the gear display panel illuminated?

P
R
O
2
1

thirdgen88

yes it has a light

Sickness91Z28

iTrader: (1)

nick418

Mine Sucked. After couple months i took it off and threw it in the pile of junk in the garage. I regret that.

kd5boc

Actually, you can get different panels...

P P P P
R R R R
N N N N
D D 1 1
3 2 2 2
2 1 3 3
1 4

etc...

just call up B&M...

BonesNIS

I installed mine last year. It is hard to put into gear but you get used to it. I love it.

tigercyberslash

what shifter is this?