Body General body information and techniques for restoration, repairs, and modifications.

how to get in my hatch!!!

Thread Tools
 
Search this Thread
 
Old May 18, 2004 | 05:21 PM
  #1  
daddy33's Avatar
Thread Starter
Member
iTrader: (5)
 
Joined: Mar 2003
Posts: 409
Likes: 0
From: Cali
Car: '85 Camaro
Engine: LS1
Transmission: T56
Axle/Gears: 3.73
how to get in my hatch!!!

quick question. someone drilled into my rear hatch keylock and took out my system. Well they tore the hole lock and i cant get my key in or try to open it with a screwdriver or anything else. I would try to work with it inside but not sure what to do. I need to get my hatch open so i can do some work on it but need to know how to open it up! if you guys know anyway on how to open up the hatch i would greatly appreciate it. Thanks!!

-Tino
Reply
Old May 18, 2004 | 05:50 PM
  #2  
Crayz9000's Avatar
Member
 
Joined: Apr 2004
Posts: 278
Likes: 0
From: Sin City
Car: '86 IROC, '87 Volvo 240, '09 Malibu
Engine: LB9 5.0L
Transmission: 700R4
Re: how to get in my hatch!!!

Originally posted by daddy33
quick question. someone drilled into my rear hatch keylock and took out my system. Well they tore the hole lock and i cant get my key in or try to open it with a screwdriver or anything else. I would try to work with it inside but not sure what to do. I need to get my hatch open so i can do some work on it but need to know how to open it up! if you guys know anyway on how to open up the hatch i would greatly appreciate it. Thanks!!

-Tino
Well, recently repaired my power latch, so I had the whole system apart...

Does your Camaro have a power pulldown latch, or just a manual? If it's the power one, the whole motor assembly can be undone from the inside. The only problem is (kind of chicken-and-egg) that you need to be able to get the internal trim panels off first, and the screws that hold down that back panel are mounted just under the hatch. IOW, inaccessible if it's closed.

Have you talked to a locksmith about it?
Reply
Old May 18, 2004 | 06:03 PM
  #3  
daddy33's Avatar
Thread Starter
Member
iTrader: (5)
 
Joined: Mar 2003
Posts: 409
Likes: 0
From: Cali
Car: '85 Camaro
Engine: LS1
Transmission: T56
Axle/Gears: 3.73
ok sorry i didnt specify it a little more clearly. Its NOT a power motor hatch. Its a manual one and the sucky thing is that i have a custom box that fits in that hole area and the only way for that thing to come out is to have the hatch open! so its kinda really really hard to get that inside back panel off to get to anything. Im getting frustated and just want to know what i can do before i have to spend an arma and a leg and take to a locksmith or someone else.
Reply
Old May 19, 2004 | 11:33 AM
  #4  
Aviator857's Avatar
Supreme Member
20 Year Member
 
Joined: Jun 2002
Posts: 2,227
Likes: 46
From: North East GA
Car: 1989 Firebird
Engine: 5.7 LS1
Transmission: T56
You said they drilled out the key cylinder right. Depending on the damage they did, if you look at the very back of the lock there should be a rectangle about 1/4 inch long and even smaller wide, see if you can get a screw driver in there and turn it. Take it by a shop if not, a car shop not a lock smith I bet someone will pop it for free.
Reply
Old May 19, 2004 | 12:07 PM
  #5  
sqzbox's Avatar
Supreme Member
 
Joined: Jun 2003
Posts: 1,054
Likes: 0
From: Ft. Branch, In.
Car: 88 formula WS6
Engine: 305 Lo3
Transmission: 700-R4
WOW, nice form. looks just like my 88 execpt, mine has the form. sticker on the rear and doors, and 5.0 F.I. on the power bulge! Looks like you got a paint job and someone left the badge's off.
Daddy33, stick a small screw driver through the hole they drilled and turn it like a key! That's what the dirty, low life, scum sucking bas***d did when he violated your baby!
Reply
Old May 19, 2004 | 12:22 PM
  #6  
Aviator857's Avatar
Supreme Member
20 Year Member
 
Joined: Jun 2002
Posts: 2,227
Likes: 46
From: North East GA
Car: 1989 Firebird
Engine: 5.7 LS1
Transmission: T56
WOW, nice form. looks just like my 88 execpt, mine has the form. sticker on the rear and doors, and 5.0 ...
you mean mine, yea its been repainted the hood started to peal. And its a macco job I couldn't see paying more for the stickers than the paint :-) next year it will be getting a 3-4 k paint job when I finally get out of college. Then it will get most of the stickers Im still not sure about the door stickers yet though.
Reply
Old May 19, 2004 | 12:29 PM
  #7  
sqzbox's Avatar
Supreme Member
 
Joined: Jun 2003
Posts: 1,054
Likes: 0
From: Ft. Branch, In.
Car: 88 formula WS6
Engine: 305 Lo3
Transmission: 700-R4
macco or not, it still looks good! The sticker's are your option now!
What's broke on your center light? You can usually find parts in the bone yard. When mine quit working I found the contact plate
where the light get's it's power was broken. $2.00 fixed it!
Reply
Old May 19, 2004 | 01:13 PM
  #8  
Aviator857's Avatar
Supreme Member
20 Year Member
 
Joined: Jun 2002
Posts: 2,227
Likes: 46
From: North East GA
Car: 1989 Firebird
Engine: 5.7 LS1
Transmission: T56
I can't find any with that type of spoiler. But its the plastic painted part that goes around it under the spoiler. One of the sides is broken off, now its summer time Ill hit all the bone yards again and see what i find.

sorry didn't mean to hyjack your thread. let us know if you get it open.
Reply
Old May 19, 2004 | 05:40 PM
  #9  
sqzbox's Avatar
Supreme Member
 
Joined: Jun 2003
Posts: 1,054
Likes: 0
From: Ft. Branch, In.
Car: 88 formula WS6
Engine: 305 Lo3
Transmission: 700-R4
I imagine at this point, any color you find will work huh? You can always paint it!!!!:lala:
Reply
Old May 19, 2004 | 05:45 PM
  #10  
Aviator857's Avatar
Supreme Member
20 Year Member
 
Joined: Jun 2002
Posts: 2,227
Likes: 46
From: North East GA
Car: 1989 Firebird
Engine: 5.7 LS1
Transmission: T56
well I just planed on primering it and painting it when I did my spoiler or when I redo the whole car. Yea any color will do.
Reply
Old May 19, 2004 | 05:50 PM
  #11  
sqzbox's Avatar
Supreme Member
 
Joined: Jun 2003
Posts: 1,054
Likes: 0
From: Ft. Branch, In.
Car: 88 formula WS6
Engine: 305 Lo3
Transmission: 700-R4
Got any extra WS-6 center caps? I've got 3 good one's and one with cracks on the clear cover. I hate it when I clean it!
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jrdturbo
Firebirds for Sale
26
Mar 31, 2016 02:58 PM
sleprock
Interior Parts Wanted
2
Oct 3, 2015 11:01 PM
formula00ra
Interior Parts Wanted
1
Sep 28, 2015 11:50 AM




All times are GMT -5. The time now is 01:12 PM.