ok guys i picked up an 87 ta 305 tpi but no motor or transmission but the harness is all hacked up and column is ****ed so can i take a spare set of connectors and directly wire them to the motor from a battery or how would i do this

 

Assuming the motor actually works, you can run a hot wire from the battery and find a good ground spot, and touch each to one of the two connectors. If the window moves down, reverse them (or if it doesn't move at all if it is already down).

I'm assuming you just wanted a temporary solution while you look for replacement parts.

 

Remove the window switches, the blue and brown in one and blue and tan in the other, put power and ground to each switch, if the window doesnt go up reverse the two.