GTA89

please help me with this :

https://www.thirdgen.org/techbb2/sho...hreadid=304918


Thank you very much !

Ender

hey man, i just got done doing this.... i hope you really want the thing out... cuz it's a PAIN IN THE *** to get back in... but i sorta had to cuz i was putting it in another car :-P .... there's 2 bolts that go up and support the stearing column and it slides in there, there's a bolt on either side of the dash going straight up into it, there's there's like 4 or five bolts going to near the bottom of the window... and then have fun fighting the wiring that's going through it, ... make sure you label stuff... and you should prolly remove that light switch you have on in that pic :-) ...ummm, unbolt the fuse box.... take the ecm out and the million other wiring bs connected to it... ... i sure hope you have a good reason for taking it out... cuz it's not fun.... if you elaborate on what you want to accomplish maybe i can help you and you can avoid taking the whole thing out...

91zconvt

I don't know what all the confusion is about. Just start taking off the outer panels one by one, you'll see how it goes. It's self explanitory

Ender

yeah, i didn't really find it that confusing either... just a pain in the ***... but he was asking... and has another thread where he shows pictures of what he had done... so i was tryin' to help him along.... but really... unless u have a really good reason to take it out i wouldn't mess with it....

GTA89

Thanks for reply buddies...
the wires are burnt...
that's why i need to do this..
i must check everything out, i don't want let my car burn,fire
or any...

can you people tell me, where is this
blue/black wire for ? see the pic below,
its connected to the ground, with the black cable in a O-ring..

http://st27.startlogic.com/~f-bodynl...oad.php?id=491
http://st27.startlogic.com/~f-bodynl...oad.php?id=490