4th gen power seats
Thread Starter
Junior Member
Joined: Mar 2006
Posts: 6
Likes: 0
4th gen power seats
FYI I have a '72 Cutlass Hope it is OK to put some F body parts on it.
I picked up some seats this weekend from a 93 TA and to my surprise I find they have round switchplates on the sides. Looks like a pump under one as well and a mystery paddle. Search must be broken but I still managed to find out (a LOT of reading) how to wire them up and all and what the mystery paddle was for.
My question is: why do the small wires (in my case a white, grey, and grey/black) need to be connected from side to side? Also, can I find an easy way to hook the airline from one seat to the other OR do i have to go to the dealer for a new transfer pipe? Anyone got a part number?
THANKS
----------
my first thread dissapeared?
I picked up some seats this weekend from a 93 TA and to my surprise I find they have round switchplates on the sides. Looks like a pump under one as well and a mystery paddle. Search must be broken but I still managed to find out (a LOT of reading) how to wire them up and all and what the mystery paddle was for.
My question is: why do the small wires (in my case a white, grey, and grey/black) need to be connected from side to side? Also, can I find an easy way to hook the airline from one seat to the other OR do i have to go to the dealer for a new transfer pipe? Anyone got a part number?
THANKS
----------
my first thread dissapeared?
Last edited by optmusprimer; Mar 19, 2006 at 08:54 PM. Reason: Automerged Doublepost
Joined: Mar 2003
Posts: 1,149
Likes: 1
From: Gladstone, Missouri
Car: 91 Camaro RS
Engine: 5.0L TBI (ebl inside)
Transmission: T-5
Axle/Gears: 3.42 lsd 10 bolt
My apologizes, I step outside my bounds.
Last edited by Gladstoneiroc; Mar 21, 2006 at 10:55 AM.
Thread Starter
Junior Member
Joined: Mar 2006
Posts: 6
Likes: 0
Im sorry, since the question is the same NO MATTER WHAT CAR I install these seats into, I didnt know it would be an issue. Not only that, it is a question that I could not find the awnser to here, so an awnser to it would benefit the whole community.
TGO Supporter
iTrader: (2)
Joined: Jul 1999
Posts: 13,579
Likes: 9
From: Readsboro, VT
Car: 85 IROC-Z / 88 GTA
Engine: 403 LSx (Pending) / 355 Tuned Port
Transmission: T56 Magnum (Pending) / T5
Axle/Gears: 3.42 / ?
Originally Posted by Gladstoneiroc
The thread is visable, but it will be blocked soon. This is third gen.org not Cutlass.org.
Thread
Thread Starter
Forum
Replies
Last Post