does anyone know the part number for the 2 little bumbers on the inside of each door? when i called the dealship they called them front side door bumbers but they said the part number too fast for me to catch but i need it so i can order them. anyone know what im talking about? its the bumber thats like a rectangle with 2 little cones coming out of the bottom that go into the door to hook into it and the rectangle is the bumber part

 

summit sells them but i dont remember the number. They are made by oer

 

i cant find them on theire site..

 

bumper with a "P"!

 

fixed my spelling and i still only get a rubber seat back bumper to stop the seat.

 

Let me check mine... I might have a pair you can have, or 2 pairs... I have 4 doors now (one on car, one off, 2 going to junk) and all 4 have/had them. I need to count how many I have first to see if I lost any moving things around.

 

That would be amazing Dan!! Let me know if you do ad I need them for both doors

 

Rubber door bumpers !
Sold in pks of 4? at your local big box parts store under
the HELP/Dorman brand or on line thru many places like:
http://www.americanrestorationparts....P4098C966.aspx

 

Well, I found 3, besides the 4 I need to keep... Don't know what you want to do about it.

 

thanks for lookin bub, i appreciate it but ill just go to the local chevy dealer so see if i can get some from them. again i appreciate it dan i really do, btw hows the car comin? havent talked to you in ages so i havent had the chance to ask really.

 

do you have a part number because when i went to autozone they knew what i was needing but they couldnt find it either. on the computer or their book.

 

Long story short... It's not. I'm still waiting on parts I paid for 2 months ago from California so I can modify the front bumper, for one, and I'm waiting on parts from a couple other people, for 2. I have most of the front suspension parts, except bushings and ball joints (and a few bolts I need to buy new), but I ran out of paint ( ) so I'm stuck until spring, but I did get the old bushings and ball joints pressed out of the front a-arms. I found another hole (that was not there before and I have the pics to prove it!), cut it out, and made a patch. Don't have a welder setup yet as I still need the stuff and the guy to hook up the outlet I bought on the outside of the house. Found more than I bargained for on the replacement quarter panel and need another one. Bought replacement doors, mostly rust free, from an 83. Need to get a pushrod length checker and rocker arms so I can finish the engine, but I need to get the one bad crank journal (oops!) taken care of first, along with the flywheel, so I can do that. Wiring is 99% done, going to finish the rest during the winter.

I put some things back together to have support for the car cover I need to buy and put on the car before winter. Made a spreadsheet for parts... Found out I'm about halfway through the list and $2500 in so far... I think the last thing I'm going to buy for the year is the car cover, and then I'm going to save for a trans rebuild kit and whatever else I need...

 

Go somewhere else cuz them guys don't have a clue!

Front Door Bumper
Replaces GM: 4564974

One of many sellers of this item:
http://cgi.ebay.com/ebaymotors/25-GM...-/400138767735

 

Can you wait until Monday? I need to go back to the J/Y I visited last week and get some pics of the stickers on the 87 Bird that was there (same setup as me, everything they have post-82 is a V6, and I don't have stickers). I can pop a couple of them out of the driver's door for you and send the set on their merry way... (PM me your address again if you want to do this)

 

Yeah I can wait. I just noticed I didn't have them to long ago so it's on my list to get. Yeah if you don't mind doing that I would really appreciate it.