does anyone know how to take off the front bumper cover ie:these top four bolts/nuts without ripping the cover off these?

http://www.flickr.com/photos/70991265@N02/6426650859/http://www.flickr.com/photos/70991265@N02/6426650859/ by http://www.flickr.com/people/70991265@N02/, on Flickr

 

if the front bumper is on you have to get in the opening next to the battery with a ratchet its a tight fit idk how ot get the drivers side off the drivers side on my bumper was torn a foot away from the fender when i baught the car

 

both sides are like this. top two on each side. you put a ratchet on it and it just turns and unscrews the headlight support

 

really i didnt have that happen to me

 

Take it off, if they stay in the fender like that, grab with a visegrip and go with a extension from the wheel well and a 10mm socket and take them out.

 

thats what i did with the smashed side of my car

 

so take out the headlightbar, then hold visegrips on and take the nut off the back?

 

I removed my bumper cover from underneath with a deep socket and a long extension.

 

Right, I know how to take out all of the bottom ones(using a deep socket) but these just unscrew themselves from the headlight support and the bumper cover is still on.

 

Yup