damage-rbuilding front end
Supreme Member
Joined: Mar 2000
Posts: 13,414
Likes: 6
From: Central NJ, USA
Car: 1986 Firebird
Engine: 2.8 V6
Transmission: 700R4
Eh, did they take off your front end? Or is the bumper or fender dented? If they took off your whole front end than you better go to a frame shop; if they dented a fender then the frame should be fine.
Unbolt the old, bolt on a junkyard one.
Or, if the damage isn't too bad, now's a good time to pick up a book on bodywork. Work the dent out so it's very shallow, and use Bondo to fill it. Remember- Bondo must be used very THIN, if you put a thick slab on there, it'll crack in half after a year or so. Also remember that neither Bondo, or Primer, is waterproof!
------------------
-Tom P (Hot rodded 1986 Firebird 2.8l) from http://www.f-body.net/mailbag/3rd/3rd_mailbag.html message boards
---Think your car could be pic of the week? Visit http://www.f-body.net for details!
Unbolt the old, bolt on a junkyard one.
Or, if the damage isn't too bad, now's a good time to pick up a book on bodywork. Work the dent out so it's very shallow, and use Bondo to fill it. Remember- Bondo must be used very THIN, if you put a thick slab on there, it'll crack in half after a year or so. Also remember that neither Bondo, or Primer, is waterproof!
------------------
-Tom P (Hot rodded 1986 Firebird 2.8l) from http://www.f-body.net/mailbag/3rd/3rd_mailbag.html message boards
---Think your car could be pic of the week? Visit http://www.f-body.net for details!
Thread
Thread Starter
Forum
Replies
Last Post
Terrell351
Engine/Drivetrain/Suspension Parts for Sale
5
Jun 13, 2021 01:13 PM